AL-6XN
From Wikipedia, the free encyclopedia
The AL-6XN alloy is a superaustenitic stainless steel which was developed by Allegheny Ludlum Corporation. It exhibits far greater resistance to chloride pitting, crevice corrosion and stress-corrosion cracking than exhibited by the standard 300 series stainless steels, and is less costly than the traditional nickel-base corrosion resistant alloys.
The UNS Designation of the AL-6XN alloy is N08367.
The high nickel (24%) and molybdenum (6.3%) contents of the AL-6XN alloy give it good resistance to chloride stress-corrosion cracking. The molybdenum confers resistance to chloride pitting. The nitrogen content of AL-6XN alloy serves to further increase pitting resistance and also gives it higher strength than typical 300 series austenitic stainless steels, and thereby often allows it to be used in thinner sections. The high levels of chromium, molybdenum and nitrogen in AL-6XN alloy all serve to produce exceptional corrosion resistance for this formable and weldable stainless steel.
 |
This alloy–related article is a stub. You can help Wikipedia by expanding it. |
