7x64mm

From Wikipedia, the free encyclopedia

7x64mm
7x64mm (far left) amongst other rifle cartridges
Type	Rifle
Place of origin	German Empire
Service history
In service	Never issued
Production history
Designer	Wilhelm Brenneke
Designed	1917
Produced	1917 - present
Variants	7x65mmR (rimmed)
Specifications
Parent case	8x64mm S
Case type	Rimless, bottleneck
Bullet diameter	7.24 mm (0.285 in)
Neck diameter	7.95 mm (0.313 in)
Shoulder diameter	10.80 mm (0.425 in)
Base diameter	11.85 mm (0.467 in)
Rim diameter	11.95 mm (0.470 in)
Rim thickness	1.30 mm (0.051 in)
Case length	64.00 mm (2.520 in)
Overall length	84.00 mm (3.307 in)
Case capacity	4.48 cm³ (69 gr H2O)
Rifling twist	220 mm (1-8.66")
Primer type	Large rifle
Maximum pressure	415 MPa (60,200 psi)
Ballistic performance
Bullet weight/type	Velocity	Energy
139 gr (9.0 g) SP	3,000 ft/s (910 m/s)	2,810 ft·lbf (3,810 J)
154 gr (10.0 g) SP	2,900 ft/s (880 m/s)	2,877 ft·lbf (3,901 J)
175 gr (11.3 g) SP	2,700 ft/s (820 m/s)	2,833 ft·lbf (3,841 J)
Source: "Cartridges of the World" ^[1]

The 7x64mm (also unofficially known as the 7x64mm Brenneke, though its designers name officially never was added as a part of this cartridge name) is a rimless bottlenecked centerfire cartridge developed for hunting. As is customary in European cartridges the 7 denotes the 7 mm bullet caliber and the 64 denotes the 64 mm (2.52 in) case length. The 7x64mm is a popular hunting cartridge in central Europe and can due to its 84 mm (3.307 in) overall length easily be chambered in standard sized Mauser 98 bolt action rifles.

1 History
2 Cartridge dimensions
3 Contemporary use
4 See also
5 References
6 External links

[edit] History

At the start of the 20th century the famous German gun and ammunition designer Wilhelm Brenneke (1865–1951) was lengthening standard cartridge cases like the M/88 cartridge case, then used by the German military in their Mauser 98 rifles, to obtain extra muzzle velocity.

In 1912 Brenneke designed the commercially rather unsuccessful 8x64mm S cartridge. It was intended as a ballistic upgrade option for the Mauser Gewehr 98 rifles that were then standard issue in the German military. The German military chose however to stick to their 8x57mm IS rifle cartridge avoiding rechambering their service rifles for a cartridge that due to its more favourable bore area to case volume ratio ballistically would outperform the .30-06 Springfield cartridge of the United States Army. Brenneke’s engineering concept to lengthen the 57 mm (2.244 in) long M/88 cartridge case to create new for those days very powerful cartridges was essentially sound and he persisted in the development of new cartridges along this line.

In 1917 Brenneke necked down his 8x64mm S design of 1912 to 7 mm calibre and introduced it as 7x64mm and achieved a major commercial success. The 7x64mm offered compared to the 7x57mm about 10 to 12 % extra muzzle velocity. This results in a flatter trajectory and better performance at longer range. In the years between World War I and World War II the 7x64mm was often regarded by German hunters as a “miracle cartridge” and dozens of different factory loads where available on the German market. It was that highly regarded the German Wehrmacht (Army) during the 1930-ties even considered replacing the 8x57mm IS in favour for the 7x64mm for their snipers. The Wehrmacht decided - just like the German army in 1912 - to stick to the 8x57mm IS cartridge for their Mauser Karabiner 98k to keep things as simple as possible in their logistical chain.

Beside the 7x64mm rifle cartridge Brenneke also designed a rimmed version for break action rifles of the cartridge in 1917. The rimmed 7x65mmR variant of the cartridge was also immediately a commercial success.

[edit] Cartridge dimensions

The 7x64mm has 4.48 ml (69 grains) H₂O cartridge case capacity. A sign of the era in which the 7x64mm was developed are the gently sloped shoulders. The exterior shape of the case was designed to promote reliable case feeding and extraction in bolt-action rifles, under extreme conditions.

7x64mm maximum C.I.P. cartridge dimensions. All sizes in millimeters (mm).

Americans would define the shoulder angle at alpha/2 ≈ 20.42 degrees. The common rifling twist rate for this cartridge is 220 mm (1 in 8.66 in), 4 grooves, Ø lands = 6.98 mm, Ø grooves = 7.24 mm, land width = 3.70 mm and the primer type is large rifle or large rifle magnum depending on the load.

According to the official with C.I.P. (Commission Internationale Permanente Pour L'Epreuve Des Armes A Feu Portative) guidelines the 7x64mm case can handle up to 415 MPa (60190 psi) piezo pressure. In C.I.P. regulated countries every rifle cartridge combo has to be proofed at 125% of this maximum C.I.P. pressure to certify for sale to consumers.

The American .280 Remington cartridge is probably the closest ballistic twin of the 7x64mm. When compared to the 7x64mm the .280 Remington has a slightly lower maximum allowed chamber pressure and as an American 7 mm cartridge has a slightly smaller bore. European 7 mm cartridges all have 7.24 mm (0.285 in) grooves Ø diameter. American 7 mm cartridges have 7.21 mm (0.284 in) grooves Ø.

[edit] Contemporary use

The 7x64mm is one of the favorite rifle cartridges in central Europe and is offered as a chambering option in every major European hunting rifle manufacturers products palette. The versatility of the 7x64mm for hunting all kinds of European game and the availability of numerous factory loads^[2] all attribute to the 7x64mm chambering popularity. Loaded with short light bullets it can be used on small European game like roe deer and chamois. Loaded with long heavy bullets it can be used on big European game like boar, red deer, moose and brown bear. The 7x64mm offers very good penetrating ability due to a fast twist rate that enables it to fire long, heavy bullets with a high sectional density. The 7x64mm rimmed sister cartridge, the 7x65mmR, is also very popular in central Europe for the same reasons as the 7x64mm. The (former) legal banning of (ex) military service cartridges like the .308 Winchester, 7x57mm, 8x57mm I, 8x57mm IS and the .30-06 Springfield in countries like France and Belgium also promoted acceptance and use of the 7x64mm and the 7x65mmR.