User talk:76.203.199.114
From Wikipedia, the free encyclopedia
A circle is one of the basic shapes of Euclidean geometry. It is the set of all points in a plane at a fixed distance, called the radius, from a particular point, called the center. Through any three points not on the same line, there passes one and only one circle.
A chord of a circle is a line segment both of whose endpoints lie on the circle. A diameter is a chord passing through the center. The length of a diameter is called the diameter of the circle; it is twice the radius.
Circles are simple closed curves which divide the plane into an interior and an exterior. The circumference of a circle is the perimeter of the circle, and the interior of the circle is called a disk. An arc is any connected part of a circle.
A circle is a special ellipse in which the two foci coincide (i.e., are the same point). Circles are conic sections attained when a right circular cone is intersected with a plane perpendicular to the axis of the cone.
Contents |
[edit] Analytic results
In an x-y Cartesian coordinate system, the circle with center (a, b) and radius r is the set of all points (x, y) such that
The equation of the circle follows from the Pythagorean theorem applied to any point on the circle. If the circle is centred at the origin (0, 0), then this formula can be simplified to
When expressed in parametric equations, (x, y) can be written using the trigonometric functions sine and cosine as
where t is a parametric variable, understood as the angle the ray to (x, y) makes with the x-axis. Alternatively, in stereographic coordinates, the circle has a parametrization
In homogeneous coordinates each conic section with equation of a circle is
It can be proven that a conic section is a circle if and only if the point I(1,i,0) and J(1,-i,0) lie on the conic section. These points are called the circular points at infinity.
In polar coordinates the equation of a circle is
In the complex plane, a circle with a center at c and radius (r) has the equation | z − c | 2 = r2. Since , the slightly generalised equation for real p, q and complex g is sometimes called a generalised circle. Not all generalised circles are actually circles: a generalized circle is either a (true) circle or a line.
[edit] Slope
The tangent line to a circle of radius r centered at the origin at the point (x1, y1) is the locus of the equation
Hence, the slope of a circle at (x1, y1) is given by:
More generally, the slope at a point (x, y) on the circle (x − a)2 + (y − b)2 = r2, i.e., the circle centered at (a, b) with radius r units, is given by
provided that .
[edit] Pi (π)
Pi or π is the ratio of a circle's circumference to its diameter.
The numeric value of π never changes.
In modern English, it is pronounced /ˈpaɪ/ (as in apple pie).
[edit] Circumference
- Length of a circle's circumference is
- Alternate formula for circumference:
Given that the ratio circumference c to the Area A is
The r and the π can be canceled, leaving
Therefore solving for c:
So the circumference is equal to 2 times the area, divided by the radius. This can be used to calculate the circumference when a value for π cannot be computed.
[edit] Diameter
The diameter of a circle is a straight line through the center of the circle touching the circle at both sides.
The diameter of a circle is double its radius.
[edit] Area enclosed
- The area enclosed by a circle is the radius squared, multiplied by π.
Using a square with side lengths equal to the diameter of the circle, then dividing the square into four squares with side lengths equal to the radius of the circle, take the area of the smaller square and multiply by π.
that is, approximately 79% of the circumscribing square. The circle is the plane curve enclosing the maximum area for a given arclength. This relates the circle to a problem in the calculus of variations.
[edit] Properties
- The circle is the shape with the highest area for a given length of perimeter. (See Isoperimetry)
- The circle is a highly symmetric shape: every line through the centre forms a line of reflection symmetry and it has rotational symmetry around the center for every angle. Its symmetry group is the orthogonal group O(2,R). The group of rotations alone is the circle group T.
- All circles are similar.
- A circle's circumference and radius are proportional,
- The area enclosed and the square of its radius are proportional.
- The constants of proportionality are 2π and π, respectively.
- The circle centered at the origin with radius 1 is called the unit circle.
- Through any three points, not all on the same line, there lies a unique circle. In Cartesian coordinates, it is possible to give explicit formulae for the coordinates of the center of the circle and the radius in terms of the coordinates of the three given points. See circumcircle.
[edit] Chord properties
- Chords equidistant from the center of a circle are equal (length).
- Equal (length) chords are equidistant from the center.
- The perpendicular bisector of a chord passes through the center of a circle; equivalent statements stemming from the uniqueness of the perpendicular bisector:
- A perpendicular line from the center of a circle bisects the chord.
- The line segment (Circular segment) through the center bisecting a chord is perpendicular to the chord.
- If a central angle and an inscribed angle of a circle are subtended by the same chord and on the same side of the chord, then the central angle is twice the inscribed angle.
- If two angles are inscribed on the same chord and on the same side of the chord, then they are equal.
- If two angles are inscribed on the same chord and on opposite sides of the chord, then they are supplemental.
- For a cyclic quadrilateral, the exterior angle is equal to the interior opposite angle.
- An inscribed angle subtended by a diameter is a right angle.
- The diameter is longest chord of the circle.
[edit] Sagitta properties
- The sagitta is a line segment drawn perpendicular to a chord, between the midpoint of that chord and the circumference of the circle.
- Given the length y of a chord, and the length x of the sagitta, the Pythagorean theorem can be used to calculate the radius of the unique circle which will fit around the two lines:
[edit] Tangent properties
- The line drawn perpendicular to the end point of a radius is a tangent to the circle.
- A line drawn perpendicular to a tangent at the point of contact with a circle passes through the centre of the circle.
- Tangents drawn from a point outside the circle are equal in length.
- Two tangents can always be drawn from a point outside of the circle.
[edit] Theorems
- See also: Power of a point
- The chord theorem states that if two chords, CD and EF, intersect at G, then CG×DG = EG×FG. (Chord theorem)
- If a tangent from an external point D meets the circle at C and a secant from the external point D meets the circle at G and E respectively, then DC2 = DG×DE. (tangent-secant theorem)
- If two secants, DG and DE, also cut the circle at H and F respectively, then DH×DG=DF×DE. (Corollary of the tangent-secant theorem)
- The angle between a tangent and chord is equal to the subtended angle on the opposite side of the chord. (Tangent chord property)
- If the angle subtended by the chord at the center is 90 degrees then l = √2 × r, where l is the length of the chord and r is the radius of the circle.
- If two secants are inscribed in the circle as shown at right, then the measurement of angle A is equal to one half the difference of the measurements of the enclosed arcs (DE and BC). This is the secant-secant theorem.
[edit] Inscribed angles
An inscribed angle ψ is exactly half of the corresponding central angle θ (see Figure). Hence, all inscribed angles that subtend the same arc have the same value (cf. the blue and green angles ψ in the Figure). Angles inscribed on the arc are supplementary. In particular, every inscribed angle that subtends a diameter is a right angle.
[edit] Apollonius circle
Apollonius of Perga showed that a circle may also be defined as the set of points in plane having a constant ratio of distances to two fixed foci, A and B.
The proof is as follows. A line segment PC bisects the interior angle APB, since the segments are similar:
Analogously, a line segment PD bisects the corresponding exterior angle. Since the interior and exterior angles sum to , the angle CPD is exactly , i.e., a right angle. The set of points P that form a right angle with a given line segment CD form a circle, of which CD is the diameter.
[edit] Cross-ratios
A closely related property of circles involves the geometry of the cross-ratio of points in the complex plane. If A, B, and C are as above, then the Apollonius circle for these three points is the collection of points P for which the absolute value of the cross-ratio is equal to one:
- | [A,B;C,P] | = 1.
Stated another way, P is a point on the Apollonius circle if and only if the cross-ratio [A,B;C,P] is on the unit circle in the complex plane.
[edit] Generalized circles
- See also: Generalized circle
If C is the midpoint of the segment AB, then the collection of points P satisfying the Apollonius condition
- (1)
is not a circle, but rather a line.
Thus, if A, B, and C are given distinct points in the plane, then the locus of points P satisfying (1) is called a generalized circle. It may either be a true circle or a line.
[edit] References
- ^ Pedoe, Dan (1988). Geometry: a comprehensive course. Dover.
[edit] See also
[edit] External links
- Interactive Java applets for the properties of and elementary constructions involving circles.
- Interactive Standard Form Equation of Circle Click and drag points to see standard form equation in action
- Clifford's Circle Chain Theorems. Step by step presentation of the first theorem. Clifford discovered, in the ordinary Euclidean plane, a "sequence or chain of theorems" of increasing complexity, each building on the last in a natural progression by Antonio Gutierrez from "Geometry Step by Step from the Land of the Incas"
- Munching on Circles at cut-the-knot
- Ron Blond homepage - interactive applets
- calculate circumference and area with your own values
- MathAce » Circles MathAce's article about circles - has a good in-depth explanation of unit circles and transforming circular equations.
Category:Geometric shapes Category:Curves Category:Conic sections Category:Pi
ar:دائرة zh-min-nan:Îⁿ-hêng bs:Krug bg:Окръжност ca:Cercle cs:Kružnice cy:Cylch da:Cirkel de:Kreis (Geometrie) et:Ringjoon el:Κύκλος es:Círculo eo:Cirklo eu:Zirkulu fa:دایره fr:Cercle gl:Círculo ko:원 (기하) hr:Kružnica id:Lingkaran is:Hringur it:Cerchio he:מעגל ht:Sèk lv:Riņķis lb:Krees (Geometrie) lt:Apskritimas hu:Kör mk:Кружница ml:വൃത്തം nl:Cirkel ja:円 (数学) no:Sirkel nn:Sirkel pl:Okrąg pt:Circunferência ksh:Kriiß (Mattematik) qu:P'allta muyu ru:Окружность sco:Raing simple:Circle sk:Kružnica sl:Krog sr:Круг fi:Ympyrä sv:Cirkel ta:வட்டம் th:รูปวงกลม tr:Çember uk:Коло yo:Ìyípo zh:圆
This is the discussion page for an anonymous user, identified by the user's numerical IP address. Some IP addresses change periodically, and may be shared by several users. If you are an anonymous user, you may create an account or log in to avoid future confusion with other anonymous users. Registering also hides your IP address. [WHOIS • RDNS • RBLs • Traceroute • Geolocate • Tor check • Rangeblock finder] · [RIRs: America · Europe · Africa · Asia-Pacific · Latin America/Caribbean] |