Image:Welding power supply-Miller-Syncrowave350LX-front-triddle.jpg

This image has been (or is hereby) released into the public domain by its author, Triddle at the English Wikipedia project. This applies worldwide. In case this is not legally possible: Triddle grants anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

[edit] Overview

This is a picture of the front of a Miller Syncrowave 350LX welding power source for Gas Tungsten Arc Welding and Shielded Metal Arc Welding. This machine has the ability to change direct current polarities as well as to change from direct current to alternating current welding current with rotation of the switch in the center of the picture. Do not switch under load is labeled below the switch because operation of the mechanical switch while the high welding current is flowing through it will cause arcing and destruction of the switch components.

[edit] Technical Specifications

• Output Range: 3 to 400 amps
• Weight: 496 lbs (225 kg)
• Dimensions: 36 inches (92 cm) tall, 22 inches (57 cm) wide, 25 inches (64 cm) deep

[edit] Power Label

For clarification the input power information label reads as follows:

• Volts 200/230/460
• Amps 151/131/67
• KW 17.4
• Phase 1
• Hertz 50/60