Waterproof fabric

From Wikipedia, the free encyclopedia

Waterproof fabrics are usually natural or synthetic fabrics that are laminated to or coated in some sort of permanently waterproofing material, such as rubber, polyvinyl chloride (PVC), polyurethane (PU), silicone elastomer, and wax. Examples include the rubberised fabric used in Mackintosh jackets and inflatable boats.

[edit] Waterproof/breathable fabrics

(Alternative spellings include "waterproof breathable" and "waterproof-breathable".)

Waterproof/breathable fabrics are defined as fabrics that will withstand over 1000 millimetres of water (9.8 kPa) pressure without leaking (see hydrostatic head), whilst allowing water vapour to pass through. Their most common use is in outdoor sports clothing and single wall tents, because of their ability to allow sweat to evaporate while remaining impervious to rain.

Some common waterproof/breathable fabrics are:

feather and fur technology supplied by furtech
Gore-Tex
eVENT
Sympatex
3-ply Entrant-EV™membrane Mountain Equipment Co-op
Drilite Extreme, made by Mountain Equipment
HyVent, made by The North Face
H2No, made by Patagonia, Inc|Patagonia
Omni-Tech by Columbia
Conduit, made by Mountain Hardwear
Triplepoint Ceramic, made by Lowe Alpine
Precip, made by Marmot
Watergate, made by Outdoor Designs
Closely woven cotton
Polymer-encapsulated cotten EPIC, made by Nextec
Wax impregnated cotton or cotton/polyester mixes (such as those used in Barbour coats and Fjällräven's G-1000 fabric)
Epoxy (any maker,do not advertise in Wikipedia)
Hyper-Dri by Mark's work wearhouse