Voter Verified Paper Audit Trail

From Wikipedia, the free encyclopedia

Voter Verified Paper Audit Trail (VVPAT) or Verified Paper Record (VPR) was intended as an independent verification system for voting machines designed to assure voters that their vote was cast correctly, to detect possible election fraud or malfunction, and to provide a means to audit the stored electronic results. It is limited primarly by three factors. 1) Video voter behavior during actual an actual election revealed that most voters do not "verify" their choices by reading the VVPAT. 2) A full VVPAT recount is labor intensive and expensive, and likely unaffordable to most candidates seeking it. 3) And most importantly, while VVPAT was designed to serve as a check on DRE (Direct Recording Electronic) vote recorders, it relies on the same propriatary programming and electronics, an obvious conflict which made VVPAT disingenious by design.

The added security of the VVPAT derived from two fundamental differences between paper and computer memory as a recording medium when storing votes. Paper is readable by the human eye, reading computer memory requires a device and software which has to be trusted. This property allows voters to directly verify their recorded votes on VVPAT records before casting their vote. Printed paper can be harder to change after the fact by the voting machine opposed to computer memory^[1] which with some voting machines^[2][3] could be changed quickly and undetectably. Corrupt or malfunctioning electronic voting machines that do not have VVPAT capabilities might store votes other than as intended by the voter unnoticed. A VVPAT enables voters to verify that their votes are cast as intended and can serve as an additional barrier to changing or destroying votes.

Contents 1 Overview 2 VVPAT Application 3 Challenges and concerns with VVPAT 3.1 Security Concerns 3.2 Usability and ergonomic concerns 3.3 Privacy concerns 3.4 Effectiveness concerns 3.5 Accessibility concerns 3.6 Reliability Concerns 3.7 Implementation concerns 4 Legal Questions Around VVPAT 5 Examples 6 References 7 See also 8 External links

[edit] Overview

The Voter Verified Paper Audit Trail (VVPAT) is a method of providing feedback to voters using a ballotless voting system, including a direct recording electronic voting system (DRE), to assure voters that their votes have been recorded as intended. It is intended, and some argue necessary, as a means by which to detect fraud and equipment malfunction. Depending on election laws the paper audit trail may constitute a legal ballot and therefore provide a means by which a manual vote count can be conducted if a recount is necessary.

In Non-document ballot voting systems -- both mechanical voting machines and DRE voting machines -- the voter does not have an option to review a tangible ballot to confirm the voting system accurately recorded his or her intent. In addition, an election official is unable to manually recount ballots in the event of a dispute. Because of this, critics claim there is an increased chance for electoral fraud or malfunction and security experts, such as Bruce Schneier, have demanded voter-verifiable paper audit trails.^[4] Non-document ballot voting systems allow only a recount of the "stored votes." These "stored votes" might not represent the correct voter intent if the machine has been corrupted or suffered malfunction.

A fundamental hurdle in the implementation of paper audit trails is the performance and authority of the audit. Paper audit systems increase the cost of electronic voting systems, can be difficult to implement, often require specialized external hardware, and can be difficult to use. In the United States 27 states require a paper audit trail by statute or regulation for all direct recording electronic voting machines used in public elections.^[5] Another 18 States don't require them but use them either statewide or in local jurisdictions.^[6]

[edit] VVPAT Application

Various technologies can be used to implement a paper audit trail.

• Attachment of a printer to direct recording electronic voting machines that print paper records stored within the machine. Such designs usually present the record to the voter behind a transparent surface (known as the "Mercuri method") to enable a voter to confirm a printed record matches the electronic ballot. The records can be manually counted and compared to the electronic vote totals in the event of a dispute.
• Attachment of a printer to direct recording electronic voting machines that print an encrypted receipt that is either retained by the voter or stored within the machine. If the receipt is retained, the receipts can be manually counted and compared to the electronic vote totals in the event of a dispute. These systems have not been used in elections in the United States.
• Creation of an encrypted audit trail at the same time the electronic ballot is created in an direct recording electronic voting machine, a form of witness system. The audit trail can be accessed and compared to the electronic vote totals in the event of a dispute.

Systems that allow the voter to prove how they voted are never used in U.S. public elections, and are outlawed by most state constitutions. The primary concerns with this solution are voter intimidation and vote selling.

Dr. Rebecca Mercuri, the creator of the VVPAT concept (as described in her Ph.D. dissertation in October 2000 on the basic voter verifiable ballot system), proposes to answer the auditability question by having the voting machine print a paper ballot or other paper facsimile that can be visually verified by the voter before being entered into a secure location. Subsequently, this is sometimes referred to as the "Mercuri method".

Professor Avi Rubin has testified in front of the United States House Committee on House Administration in favor of voting systems that use a paper ballot and disfavoring systems that use retrofitted VVPAT attachments. He has said on his personal blog that "after four years of studying the issue, I now believe that a DRE with a VVPAT is not a reasonable voting system."^[7]

An auditable system, such as that provided with VVPAT, can be used in randomized recounts to detect possible malfunction or fraud. With the VVPAT method, the paper ballot can be treated as the official ballot of record. In this scenario, the ballot is primary and the electronic records are used only for an initial count or, in some cases, if the VVPAT is damaged or otherwise unreadable. In any subsequent recounts or challenges the paper, not the electronic ballot, would be used for tabulation. Whenever a paper record serves as the legal ballot, that system will be subject to the same benefits and concerns of any paper ballot system.

Matt Quinn, the developer of the original Australian DRE system, believes that in the future there should be a, "There's no reason voters should trust a system that doesn't have it, and they shouldn't be asked to. Why on earth should [voters] have to trust me -- someone with a vested interest in the project's success? A voter-verified audit trail is the only way to 'prove' the system's integrity to the vast majority of electors, who after all, own the democracy."^[8]

[edit] Challenges and concerns with VVPAT

[edit] Security Concerns

The introduction of malicious software into a VVPAT system can cause it to intentionally misrecord the voter's selections. This attack could minimized detection by manipulating only a small percentage of the votes or for only lesser known races.^[9]

Another security concern is that a VVPAT could print while no voter is observing the paper trail, a form of ballot stuffing.^[10] Even if additional votes were discovered through matching to the voters list, it would be impossible to identify legitimate ballots from fraudulent ballots.

Alternately the printer could invalidate the printed record after the voter leaves and print a new fraudulent ballot. These ballots would be undetectable as invalidated ballots are quite common during elections.^[11]Also, VVPAT systems that are technically able to reverse the paper feed could be open to manipulated software overwriting or altering the VVPAT after the voter checks it.

[edit] Usability and ergonomic concerns

For the voter the printed record is "in a different format than the ballot, in a different place, is verified at a different time, and has a different graphical layout with different contrast and lighting parameters."^[12] In November 2003 in Wilton, CT, virtually all voters had to be prompted to find and verify their receipt, increasing the time required to vote and the work for the pollworkers. The VVPAT adds to the complexity of voting, already a deterrent to voting.^[12]

In addition, a VVPAT component may not be easily usable by poll-workers, many of whom are already struggling with DRE maintenance and use and new elections law requirements. In the 2006 primary election in Cuyahoga County, Ohio, a study found that 9.6 percent of the VVPAT tapes were were either destroyed, blank, illegible, missing, taped together or otherwise compromised. In one case the thermal paper was loaded into the printer backwards leaving a blank tape.^[13][14], which was not realized by voters who couldn't verify the paper trail. The Cuyahoga Election Review Panel proposed in its final report to remove the opaque doors covering the VVPAT except the ones equipped with equipment for blind voters.^[15] In general collecting and counting these printed records can be difficult.^[12]

Records printed on continuous rolls of paper is more difficult than counting standard paper ballots or even punch cards.^[12]

[edit] Privacy concerns

Current VVPAT systems print the ballot records out in the order in which they were cast. Many jurisdictions also record the order in which voters vote^{[citation needed]}, thus possibly compromising the secrecy of the vote. If there are multiple voting machines it would be more difficult to match between the full voter list and the VVPATs.

Alternately, an attacker could watch the order in which people use a particular voting system and note the order of each particular vote he is interested in. If that attacker later obtains the paper ballot records she could compare the two an compromise the privacy of the ballot. This could also lead to vote selling and voter intimidation.^[16]

[edit] Effectiveness concerns

Also problematic is that voters are not required to actually check the paper audit before casting a ballot, which is critical to "verifying" the vote. While the option to look at the paper may provide comfort to an individual voter, the VVPAT does not serve as an appropriate check on malfunction or fraud unless a statistically relevant number of voters participate.

[edit] Accessibility concerns

Current VVPAT systems are not usable by some disabled voters. Senator Christopher Dodd (D-CT) testified before the United States Senate Committee on Rules and Administration at a June 2005 hearing on Voter Verification in Federal Elections "The blind cannot verify their choices by means of a piece of paper alone in a manner that is either independent or private. Nor can an individual who has a mobility disability, such as hand limitations, verify a piece of paper alone, if that individual is required to pick up and handle the paper."^[17]

The League of Women Voters (LWV) didn't see a need for VVPATs for a long time. In her testimony to the Election Assistance Commission in 2004 Kay Maxwell, President LWV still expressed concerns for voters with limited English proficiency and low literacy as well: "The VVPT system provides for the voter to verify the paper ballot, which historically disenfranchised voters will find difficult to do if they cannot see or if they have difficulty reading the paper verification. Private and independent voting is important, and, at this juncture, seems inconsistent with the VVPT system for significant numbers of voters."^[18] But in its June 2006 convention the LWV passed a motion to support only voting systems with a VVPAT.^[19][20]

[edit] Reliability Concerns

VVPAT systems can also introduced increased concern over reliability. Professor Michael Shamos points out that "Adding a paper printing device to a DRE machine naturally adds another component that can fail, run out of ink, jam or run out of paper. If DREs are alleged already to be prone to failure, adding a paper trail cannot improve that record."^[21] In Brazil in 2003, where a small number of precincts had installed paper trails, failure of the printers delayed voters by as much as 12 hours, a figure that would be catastrophic in the U.S.^[22]

Current implementation of VVPAT systems use thermal printers to print their paper ballot records. Ballot records printed on the thermal paper will fade with time. Also, heat applied to the paper before or after the election can destroy the printing.^[12]

[edit] Implementation concerns

It can be significantly more difficult to implement a VVPAT as an after-the-fact feature. For jurisdictions currently using direct recording electronic voting machines that lack a VVPAT, implementation can be expensive to add and difficult to implement due to the specialized external hardware required. To add a VVPAT component to a DRE machine, a jurisdiction would be required to purchase the system designed by the vendor of the DRE machine with a no bid, sole source purchase contract. That assumes the vendor has designed a component that is compatible with the DRE machine in use. The vendor may not have developed a VVPAT component that is compatible with the DRE machine in use, thus requiring the jurisdiction to purchase an entirely new voting system.

For jurisdictions not currently using direct recording electronic voting machines, the introduction of a new voting system that includes a VVPAT component would have less implementation challenges.

[edit] Legal Questions Around VVPAT

One important question of VVPAT systems is when should an audit be performed? Some have suggested that random audits of direct recording electronic voting machines be performed on Election Day to protect against machine malfunction. However, the partial tallying of votes before the polls have closed could create a problem similar to the occurrence in American national elections where a winner is declared based on East Coast results long before polls have closed on the West Coast. In addition, the partial tallying of votes before the polls have closed may be illegal in some jurisdictions. Others have suggested that random audits of direct recording electronic voting machines be performed after the election or only in the event of a dispute.

In the event an audit is performed after the election and a discrepancy is discovered between the ballot count and the audit count it is unclear which count is the authoritative count. Some jurisdictions have statutorily defined the ballot as the authoritative count leaving the role of an audit in question. Because VVPAT is a recent addition to direct record voting systems the authority question remains unclear.

[edit] Examples

Several voter verifiable audit trail systems exist. They include:

• AccuVote TSX™ with Printer
• AVC Edge® with VeriVote Printer
• iVotronic Real Time Audit Log

[edit] References

[edit] See also

• End-to-end auditable voting systems
• 2004 U.S. presidential election controversy and irregularities
• Help America Vote Act
• Vote counting system
• Voting machine
• Electronic Voting
• DRE voting machine
• Black Box Voting

[edit] External links

• Independent Verification: Essential Action to Assure Integrity in the Voting Process, Roy G. Saltman, August 22, 2006
• Brennan Center Voting Technology Initiative
• ProCon.org's Review of paper audit trails
• Verified Voting
• National Committee on Voting Integrity
• Secret-Ballot Receipts: True Voter-Verifiable Elections (mirror) by David Chaum^[23], Punchscan