Viterbi decoder
From Wikipedia, the free encyclopedia
A viterbi decoder uses the Viterbi algorithm for decoding a bitstream that has been encoded using Forward error correction based on a Convolutional code.
There are other algorithms for decoding a convolutionally encoded stream (for example, the Fano algorithm). The Viterbi algorithm is the most resource-consuming, but it does the maximum likelihood decoding. It is generally used for decoding a convolutional code with a constraint length .
Viterbi decoding was developed by Andrew J. Viterbi and published in the paper "Error Bounds for Convolutional Codes and an Asymptotically Optimum Decoding Algorithm", IEEE Transactions on Information Theory, Volume IT-13, pages 260-269, in April, 1967.
There are both hardware (in modems) and software implementations of a Viterbi decoder.
Contents |
[edit] Hardware implementation
A hardware viterbi decoder for basic (not perforated) code usually consists of the following major blocks:
- Branch metric unit (BMU)
- Path metric unit (PMU)
- Traceback unit (TBU)
[edit] Branch metric unit (BMU)
A branch metric unit's function is to calculate branch metrics, which are normed distances between every possible symbol in the code alphabet, and the received symbol.
There are hard decision and soft decision viterbi decoders. The decoder of the first type receives a simple bitstream on its input. In this case a Hamming distance is used as a metric. The second-type decoder receives a bitstream containing information about the reliability of each received symbol. Usually this information is encoded as follows (the table is shown for 3-bit input):
value | meaning |
000 | strongest 0 |
001 | relatively strong 0 |
010 | relatively weak 0 |
011 | weakest 0 |
100 | weakest 1 |
101 | relatively weak 1 |
110 | relatively strong 1 |
111 | strongest 1 |
Of course, it is not the only way to encode reliablility data.
The squared Euclidean distance is used as a metric for soft decision decoders.
[edit] Path metric unit (PMU)
A path metric unit summarizes branch metrics to get metrics for 2K − 1 paths, one of which can eventually be chosen as optimal. Every clock it makes 2K − 1 decisions, throwing off wittingly nonoptimal paths. The results of these decisions are written to the memory of a traceback unit.
The core elements of a PMU are ACS (Add-Compare-Select) units. The way in which they are connected between themselves is defined by a specific code's trellis diagram.
Since branch metrics are always , there must be an additional circuit preventing metric counters from overflow (it isn't shown on the image). An alternate method that eliminates the need to monitor the path metric growth is to allow the path metrics to "roll over", to use this method it is necessary to make sure the path metric accumulators contain enough bits to prevent the "best" and "worst" values from coming within 2(n-1) of each other. The compare circuit is essentially unchanged.
It is possible to monitor the noise level on the incoming bit stream by monitoring the rate of growth of the "best" path metric, a simpler way to do this is to monitor a single location or "state" and watch it pass "upward" through say four discrete levels within the range of the accumulator. As it passes upward through each of these thresholds, a counter is incremented that reflects the "noise" present on the incoming signal.
[edit] Traceback unit (TBU)
Back-trace unit restores an (almost) maximum-likelihood path from the decisions made by PMU. Since it does it in inverse direction, a viterbi decoder comprises a FILO (first-in-last-out) buffer to reconstruct a correct order.
Note that the implementation shown on the image requires double frequency. There are some tricks that eliminate this requirement.
[edit] Implementation issues
[edit] Euclidean metric computation
The squared norm distance (l2) distance between the received and the actual symbols in the code alphabet may be further simplified into a linear sum/difference form, which makes it less computationally intensive.
Consider a 1/2 convolutional coder, which generates 2 bits (00, 01, 10 or 11) for every input bit (1 or 0). These Return-to-Zero signals are translated into a Non-Return-to-Zero form shown alongside.
code alphabet | vector mapping |
00 | 1, 1 |
01 | 1, -1 |
10 | -1, 1 |
11 | -1, -1 |
Each received symbol may be represented in vector form as vr = {r0, r1}, where r0 and r1 are soft decision values, whose magnitudes signify the joint reliability of the received vector, vr.
Every symbol in the code alphabet may, likewise, be represented by the vector vi = {±1, ±1}.
The actual computation of the Euclidean distance metric is:
D = ||vr - vi||2 = ||vr||2 - 2 (vr . vi) + ||vi||2
Each square term is a normed distance, depicting the energy of the symbol. For ex., the energy of the symbol vi = {±1, ±1} may be computed as
||vi||2 = (±1)2 + (±1)2 = 2
Thus, the energy term of all symbols in the code alphabet is constant (at (normalized) value 2).
The Add-Compare-Select (ACS) operation compares the metric distance between the received symbol ||vr|| and any 2 sumbols in the code alphabet whose paths merge at a node in the corresponding trellis, ||vi(0)|| and ||vi(1)||. This is equivalent to comparing
D0 = ||vr||2 - 2 (vr . vi(0)) + ||vi(0)||2
and
D1 = ||vr||2 - 2 (vr . vi(1)) + ||vi(1)||2
But, from above we know that the energy of vi is constant (equal to (normalized) value of 2), and the energy of vr is the same in both cases. This reduces the comparison to a minima function between the 2 (middle) dot product terms,
min((- 2 (vr . vi(0)), (- 2 (vr . vi(1))) = max((vr . vi(0)), (vr . vi(1)))
since a min operation on negative numbers may be interpreted as an equivalent max operation on positive quantities.
Each dot product term may be expanded as
max(({r0, r1} . {±1, ±1}), ({r0, r1} . {±1, ±1})) = max(± r0 ± r1, ± r0 ± r1)
where, the signs of each term depend on symbols, vi(0) and vi(1), being compared. Thus, the squared Euclidean metric distance calculation to compute the branch metric may be performed with a simple add/subtract operation.
[edit] Traceback
The general approach to traceback is to accumulate path metrics for up to five times the constraint length (5 * (K - 1)), find the node with the largest accumulated cost, and begin traceback from this node.
However, computing the node which has accumulated the largest cost (either the largest or smallest integral path metric) involves finding the maxima or minima of several (usually 2K-1) numbers, which may be time consuming when implemented on embedded hardware systems.
Most communication systems employing Viterbi decoding involving data packets of fixed sizes, with a fixed bit/byte pattern either at the beginning or/and at the end of the data packet. By using the known bit/byte pattern as reference, the start node may be set to a fixed value, thereby obtaining a perfect Maximum Likelihood Path during traceback.
[edit] Limitations
Generally speaking, the viterbi decoder doesn't produce an exact maximum-likelihood stream due to these limitations:
- Quantizing of an input signal, branch and path metrics.
- Limited traceback length.
[edit] Perforated codes
A hardware viterbi decoder of perforated codes is commonly implemented in such a way:
- A deperforator, which transforms the input stream into the stream which looks like an original (imperforated) stream with ERASE marks at the places where bits were erased.
- A basic viterbi decoder understanding these ERASE marks (that is, not using them for branch metric calculation).
[edit] Software implementation
See Viterbi algorithm.
One of the most time-consuming operations is a so-called ACS butterfly, that's why it is usually implemented using an assembly language and appropriate instruction set exstensions (such as SSE2).
[edit] Applications
The Viterbi decoding algorithm is widely used in the following areas:
- Decoding trellis-coded modulation (TCM), the technique used in telephone-line modems to squeeze high spectral efficiency out of 3 kHz-bandwidth analog telephone lines. The TCM is also used in the PSK31 digital mode for amateur radio and sometimes in the radio relay and satellite communications.
- Decoding convolutional codes in satellite communications.
[edit] External link
- [1] – Provides details on Viterbi decoding, as well as a bibliography.