Simons' BASIC
From Wikipedia, the free encyclopedia
- This product is widely, but incorrectly, called "Simon's BASIC", because of confusion between the first name "Simon" and the surname "Simons".
Simons' BASIC was an extension to BASIC 2.0 for the Commodore 64 home computer. Written by 16-year-old British programmer David Simons in 1983, it was distributed by Commodore in cartridge format.
[edit] Features
114 additional keywords were added to BASIC 2.0 by Simons' BASIC. These included commands to ease the coding of sprites, high-resolution and multicolor graphics, and sound. In addition, commands were also implemented to aid in structured programming. Keywords to assist in writing and editing BASIC programs, similar to those in the VIC-20 Programmer's Aid cartridge, were also included. Also, programs written in Simons' BASIC could employ hexadecimal numbers in assignments and calculations by including a $ prefix, or binary numbers by utilizing a % prefix.
Because a portion of the cartridge data was mapped into memory at addresses $8000–$9FFF, which overlapped part of the standard C64 BASIC RAM, the amount of available memory for BASIC programs was 8 KB less than that of a standard C64 configuration.
[edit] The 114 keywords
The Simons' BASIC startup screen. Note the altered background and text colors (vs the ordinary C64 blue tones), and the reduction of available BASIC program memory by the 8 KB used by the cartridge (memory-mapped).
[edit] Sprite (MOB) handling keywords
- MOB SET - enables a sprite and defines its attributes
- MMOB - positions a sprite on the screen
- RLOCMOB - causes a sprite to smoothly move from one location to another
- CMOB - sets up the two global colors for multicolor sprites
- MOB OFF - disables a sprite
- DETECT - initializes sprite collision detection
- CHECK - checks for a sprite collision
[edit] High resolution graphics handling keywords
- HIRES - initializes a high-resolution graphics mode
- MULTI - initializes a multicolor graphics mode
- NRM - returns to the text display
- LOW COL - changes the plotting colors
- HI COL - returns to the original plotting colors
- PLOT - draws a pixel
- LINE - draws a line
- CIRCLE - draws a circle
- ARC - draws an arc
- ANGL - draws the radius of a circle
- PAINT - performs a flood fill
- REC - draws a hollow rectangle
- BLOCK - draws a solid rectangle
- DRAW - draws a user-defined set of lines
- ROT - sets scaling factors for DRAW
- CHAR - plots a text character on a high-resolution screen
- TEXT - plots a text string on a high-resolution screen
- TEST - determines whether a pixel is plotted or empty
[edit] Other graphics handling keywords
- COLOUR - sets the background and border colors
- CSET - selects a character set
- MEM - copies character ROM to RAM
- BCKGNDS - configures extended background color mode
- FLASH - sets up a screen color to flash
- OFF - cancels a previous FLASH directive
- BFLASH - causes the screen border to flash
- FCHR - fills an area of the text screen with a given character code
- FCOL - changes character colors for a selected area of the screen
- FILL - a combination of FCHR and FCOL
- MOVE - copies a section of the screen
- INV - displays a screen area in reverse
- LEFT - scrolls the screen left
- RIGHT - scrolls the screen right
- UP - scrolls the screen up
- DOWN - scrolls the screen down
- GRAPHICS - reserved variable that always equals $D000 (the VIC-II chip's base address)
[edit] Sound handling keywords
- MUSIC - plays a series of notes based on the contents of a string variable
- PLAY - determines whether the program continues to run during MUSIC
- VOL - specifies the master sound volume
- WAVE - specifies a voice type
- ENVELOPE - sets ADSR parameters for a SID voice
- SOUND - reserved variable that always equals $D400 (the SID chip's base address)
[edit] Keyboard input handling keywords
- FETCH - takes user input with restrictions defined by the command
- INKEY - checks for a function key press
- ON KEY - checks for a given keypress, then performs a branch if present
- DISABLE - disables the previous ON KEY directive
- RESUME - reenables the previous ON KEY directive
[edit] Input peripheral handling keywords
- JOY - reads a joystick
- POT - reads a paddle
- PENX - reads the light pen's horizontal position
- PENY - reads the light pen's vertical position
[edit] Sprite/custom character definition keywords
- @ - describes one line in a sprite or custom character graphic
- DESIGN - uses neighboring @ lines to define a sprite or custom character
[edit] Error trapping keywords
- ON ERROR - sets up a routine to trap error conditions
- OUT - ends an error handling routine
- NO ERROR - cancels ON ERROR and restores normal BASIC error handling
[edit] Disk handling keywords
- DIR - displays the disk directory without destroying the BASIC program in memory
- DISK - sends a string to the disk drive's command channel
- SCRSV - saves a text screen to disk
- SCRLD - loads a text screen from disk
[edit] Printer handling keywords
- HRDCPY - sends the text screen to the printer
- COPY - sends the high-resolution screen to the printer
[edit] String manipulation keywords
- INSERT - inserts one string into the middle of another
- INST - similar to INSERT, but overwrites rather than inserting
- PLACE - searches for one string in the middle of another
- DUP - duplicates a character string a given number of times
[edit] Text formatting keywords
- AT - prints a string at a given screen location
- CENTER - centers a character string on the screen
- USE - formats numeric data in strings based on a template
- LIN - returns the vertical position of the cursor
[edit] Math keywords
- MOD - performs a division operation and returns the remainder
- DIV - performs a division operation and returns the integer quotient
- FRAC - isolates the fractional portion of a number
- EXOR - performs an exclusive-OR logical operation
[edit] Programmer's aid keywords
- AUTO - automatically generates line numbers as a BASIC program is entered
- RENUMBER - renumbers a BASIC program (but does not fix GOTO/GOSUB statements)
- OLD - undeletes a program accidentally removed by the NEW command
- KEY - assigns a string as a macro to a function key
- DISPLAY - displays all function key macros
- MERGE - merges a BASIC program from disk into the program currently in memory
- PAGE - displays a BASIC program listing in page format
- OPTION - highlights Simons' BASIC keywords when using the LIST command
- DELAY - varies the rate at which the LIST command scrolls the screen
- FIND - searches the program for a string
- TRACE - displays the line numbers as a program is running
- RETRACE - displays results of a trace
- DUMP - displays all variable values except for arrays
- COLD - resets the C64
[edit] Security-related keywords
- DISAPA - marks a BASIC program line for hiding
- SECURE - hides all lines marked with DISAPA so that they cannot be viewed with LIST
[edit] Structured programming keywords
- ELSE - allows an alternative branch for IF/THEN conditionals
- REPEAT - start of a REPEAT/UNTIL loop structure
- UNTIL - defines the loop condition for a REPEAT/UNTIL loop structure, and marks its end
- RCOMP - recapitulates the last IF/THEN conditional
- LOOP - defines the start of a loop that will run until an EXIT IF conditional is true
- EXIT IF - if conditional is true, exits the current LOOP/END LOOP structure
- END LOOP - defines the end of a loop that will run until an EXIT IF conditional is true
- PROC - defines the start of a named subroutine
- END PROC - defines the end of a named subroutine
- CALL - jump to a named subroutine defined with PROC/END PROC, and stay there
- EXEC - call a named subroutine defined with PROC/END PROC, then return
- LOCAL - redefines variables for use in structures
- GLOBAL - reverses the effects of a previous LOCAL command
[edit] Miscellaneous keywords
- CGOTO - equivalent to GOTO, but accepts calculated expressions
- RESET - moves the DATA pointer to a given line number
- PAUSE - pauses program execution for a specified number of seconds
[edit] Other
- $ and % are also considered keywords, for a total of 114.
[edit] Trivia
The band Barcelona titled their 1999 debut album Simon Basic in tribute. The album includes the song "C-64".
[edit] External links
- Simons' Basic (evaluation) – By Tim Onosko, Creative Computing Vol.9 No.11, Nov 1983, p.60
