Pulse duration

From Wikipedia, the free encyclopedia

This page has been transwikied to Wiktionary. Because this article has content useful to Wikipedia's sister project Wiktionary, it has been copied to there, and its dictionary counterpart can be found at either Wiktionary:Transwiki:Pulse duration or Wiktionary:Pulse duration. It should no longer appear in Category:Copy to Wiktionary and should not be re-added there. Wikipedia is not a dictionary, and if this article cannot be expanded beyond a dictionary definition, it should be tagged for deletion. If it can be expanded into an article, please do so and remove this template. Note that {{vocab-stub}} is deprecated. If {{vocab-stub}} was removed when this article was transwikied, and the article is deemed encyclopedic, there should be a more suitable category for it.

In signal processing and telecommunication, the term pulse duration has the following meanings:

1. In a pulse waveform, the interval between (a) the time, during the first transition, that the pulse amplitude reaches a specified fraction (level) of its final amplitude, and (b) the time the pulse amplitude drops, on the last transition, to the same level.
   
   Note: The interval between the 50% points of the final amplitude is usually used to determine or define pulse duration, and this is understood to be the case unless otherwise specified. Other fractions of the final amplitude, e.g., 90% or 1/e, may also be used, as may the root mean square (rms) value of the pulse amplitude. Deprecated synonyms: pulse length, pulse width.
2. In radar, measurement of pulse transmission time in microseconds, that is, the time the radar's transmitter is energized during each cycle.

Source: From Federal Standard 1037C and from MIL-STD-188 and from the Department of Defense Dictionary of Military and Associated Terms