Priming (science)

From Wikipedia, the free encyclopedia

During scientific experiments that require high levels of accuracy and involve liquid chemicals, the equipment that will come into contact with the liquid chemicals are primed. Priming, in this context, is a cleaning and preparation process that involves cleaning the equipment with the liquid chemical it will come into contact with during the experiment. The process is used to minimize contamination and therefore obtain results that are more accurate.

When cleaning equipment it is near impossible to remove all the loose molecules. It is almost certain that traces of the chemical used to clean the equipment will remain on its surfaces, forming a microscopically thin layer.

The advantages to priming are best demonstrated with an example. Say a known quantity of concentrated hydrofluoric acid was needed for an experiment and this quantity was measured out in a measuring cylinder cleaned with water. Concentrated hydrofluoric acid reacts violently with water, the products would then contaminate the experiment. This reaction is very exothermic and would warm the quantity, perhaps creating other problems, for example, if the experiment had be carried out under standard conditions. Priming the equipment, in this case concentrated hydrofluoric acid would be used, would minimize this problem.

This process is also used in engineering and mechanics to avoid contamination, particularly in hydraulic systems, for example, braking systems in cars.