Pride of Baltimore

From Wikipedia, the free encyclopedia

The Pride of Baltimore was an authentic reproduction of a 19th century Baltimore clipper topsail schooner commissioned by citizens of Baltimore, MD. It was lost at sea with four of its twelve crew on May 14, 1986. The Pride of Baltimore II was a replica vessel of more modern design, commissioned to replace the Pride in 1988, now sails as a Goodwill Ambassador from Baltimore and the State of Maryland.

Contents

[edit] Chasseur: The historical Pride of Baltimore

The Pride was originally built as an authentic reproduction of a 19th century Baltimore Clipper schooner, patterned after and named for the legendary Baltimore built topsail schooner Chasseur sailed by the privateer Thomas Boyle. The Chaseur was known as the "Pride of Baltimore" and participated in the War of 1812.

One of the most famous of the American privateers, Captain Thomas Boyle sailed his Baltimore clipper, Chasseur, out of Fells Point, where she had been launched from Thomas Kemp's shipyard in 1812. On his first voyage as master of Chasseur in 1814, Boyle sailed east to the British Isles, where he harassed the British merchant fleet and sent a notice to George III, by way of a captured merchant vessel, declaring that the entire British Isles were under naval blockade by Chasseur alone! Despite its implausibility, this caused the British Admiralty to call vessels home from the American war to guard merchant ships sailing in convoys. Chasseur captured or sank 17 vessels before returning home to Baltimore on March 25, 1815, where the Niles Weekly Register dubbed the ship, her captain, and crew the "pride of Baltimore" for their achievement.

[edit] The modern Pride of Baltimore

Pride of Baltimore
Type: Topsail Schooner
Hull: Wood
Built: 1977, Baltimore, MD
Homeport: Baltimore, MD
Designer: Thomas C. Gillmer
Builder: Melbourne Smith/International Historical Watercraft Society
Length on deck: 90 ft
Length Waterline: 79 ft
Beam: 23 ft
Draft: 9 ft 9 in
Displacement: 129 t
Sail Area: 9,327 sq. ft

In 1975, the City of Baltimore, as part of a plan to revitalize its Inner Harbor, proposed the construction of a replica sailing vessel as a centerpiece, posting a notice requesting proposals for "an authentic example of an historic Baltimore Clipper" to be designed and built using "construction materials, methods, tools, and procedures are to be typical of the period."

A design by Thomas Gilmer was chosen, and master shipwright Melbourne Smith oversaw the construction of the vessel next to the Maryland Science Center in downtown Baltimore where residents and curious visitors could watch the craftsmen working with tools and techniques of two centuries earlier. Congresswoman Barbara Mikulski performed the launching ceremonies on February 27, 1977, only 10 months after the start of construction, and the Pride of Baltimore was commissioned on behalf of the citizens of Baltimore and Maryland by the Mayor William Donald Schaefer two months later on May 1, 1977.

The Pride sailed over 150,000 miles during her nine years of service, visiting ports along the Eastern Seaboard from Newfoundland to the Florida Keys, the Great Lakes, the Caribbean and the West Coast from Mexico to British Columbia. She visited European ports across the Atlantic in the North Sea, the Baltic Sea and the Mediterranean.

On May 14, 1986, returning from Britain on the trade route to the Caribbean, the Pride was struck with what the US Coast Guard later described as a microburst squall (see also: White squall) 250 miles north of Puerto Rico. The vessel was hit with 80 mile hour winds, capsizing and sinking her. Her Captain and 3 crew were lost, and the remaining 8 crewmembers floated in a partially-inflated life-raft for four days and seven hours with little food or water until they were rescued by the Norwegian tanker Toro.

The Pride's lost captain and crewmembers (Armin Elsaesser 42, Captain; Vincent Lazarro, 27, Engineer; Barry Duckworth, 29, Carpenter; and Nina Schack, 23, Seaman) are remembered to this day with a memorial on Rash Field in Baltimore's Inner Harbor.

[edit] Pride of Baltimore II

Pride of Baltimore, OpSail 2000
Pride of Baltimore, OpSail 2000
Pride of Baltimore, OpSail 2000
Pride of Baltimore, OpSail 2000
Pride of Baltimore II
Type: Topsail Schooner
Hull: Wood
Built: 1988, Baltimore, MD
Homeport: Baltimore, MD
Designer: Thomas C. Gilmer
Builder: G. Peter Boudreau
Sparred Length: 157 ft
Length on deck: 100 ft
Beam: 26 ft 4 in
Draft: 12 ft 6 in
Rig Height: 107 ft
Displacement: 97 grt
Sail Area: 10,442 sq. ft

The Pride of Baltimore II is an American sailing ship owned by the citizens of the state of Maryland, and operated by Pride, inc., a private, non-profit organization. She was launched in 1988 after the loss of the first Pride of Baltimore, and continues the role of Maryland's Flagship and Goodwill Ambassador, promoting business and tourism in Maryland.

Unlike the original Pride, the Pride II is not a replica of any specific vessel, and though it represents a type of vessel known as a Baltimore Clipper, it was built to contemporary standards for seaworthiness and comfort. Pride II, like its predecessor, is a topsail schooner, with two large gaff sails (one on a boom and one loose-footed), a main gaff topsail, several headsails, and a square topsail and flying topgallant on the foremast. She also flies studding sails (stun's'ls), rare on modern traditional sailing vessels. These additional sails are set along the edge of the square topsail and the mainsail, supported by additional spars known as stun's'l booms.

 

 

 

 

 

[edit] References

  • American Sail Training Association; Sail Tall Ships! 16th ed. (American Sail Training Association; 16th edition, 2005 ISBN 0-9636483-9-X)
  • Greg Pease; Sailing With Pride (C. A. Baumgartner Publishing; 1990, ISBN 0-9626299-0-1)
  • Daniel S. Parrott; Tall Ships Down (International Marine Publishing; 2002, ISBN 0-07-139092-8)
  • Tom Waldron; Pride of the Sea: Courage, Disaster, and a Fight for Survival (Citadel Press; 2004 ISBN 0-8065-2492-8)

[edit] External links