Pre-unit construction

From Wikipedia, the free encyclopedia

BSA motorcycle showing typical pre-unit construction engine and gearbox design.
BSA motorcycle showing typical pre-unit construction engine and gearbox design.

Pre-unit construction, also called separate construction, is a motorcycle engine architecture where the engine and gearbox are separate casings, with their own oil reservoirs, and usually attached to parallel plates that also attach to the frame. In the 1950s technical advances meant it was possible to reliably construct engines with integral gearboxes in one unit, known as unit construction. Another variant is semi unit construction, where the gearbox is bolted directly to the engine.

The term pre-unit is particularly applied to BSA and Triumph vertical twin motorcycles as a consequence of the strong publicity attached to their change to the unit construction of vertical twins in the early 1960s. Norton and Royal Enfield kept producing separate construction engine and gearbox motorcycles.

The 1969 "Isolastic" frame Norton Commando had the engine, gearbox, and swingarm bolted together on plates bolted to the frame with shimmed rubber bushes.

Among the Japanese manufacturers, Kawasaki produced a separate construction 650 cc vertical twin, inherited as a consequence of taking over Meguro in 1964,[1]. The Meguro 650 was a development of the BSA A7 and A10 design, produced under licence.[2]


[edit] References

  1. ^ Erwin Tragatsch (Editor) (1979). The Illustrated Encyclopedia of Motorcycles, Edition: 1988. 
  2. ^ W650 History. Ianchadwick.com. Retrieved on January 14, 2007.
Retrieved from "http://en.wikipedia.org../../../p/r/e/Pre-unit_construction.html"