Pratt & Whitney PW1120

From Wikipedia, the free encyclopedia

You have new messages (last change).
This article (or section) may need to be wikified to meet Wikipedia's quality standards.
Please help improve this article, especially its section layout, and relevant internal links. (help)
This article has been tagged since October 2006.
This article or section does not adequately cite its references or sources.
Please help improve this article by adding citations to reliable sources. (help, get involved!)
This article has been tagged since October 2006.

The introduction to this article provides insufficient context for those unfamiliar with the subject matter.
Please help improve the introduction to meet Wikipedia's layout standards. You can discuss the issue on the talk page.

The Pratt & Whitney PW1120 turbofan, rated at 6,137 kg dry and 9,337 kg with reheat and was a derivate of the F100 turbofan. The development of the PW1120, according to IDF/AF specifications, started in June 1980. It retained the F100 core module, gearbox, fuel pump, forward ducts, as well as the F100 digital electronic control, with only minor modifications. Unique PW1120 components included a wide chord low pressure (LP) compressor, single-stage uncooled low pressure (LP) turbine, simplified single stream augmentor, and a lightweight convergent/divergent nozzle. Full scale testing was initiated in June 1982, and flight clearance of the PW1120 was tested in August 1984. The PW1120 had 70 per cent similarity with the F100, so the IDF/AF would not need a special facility for spare parts. It would be built under licence by Bet-Shemesh Engines Limited in Israel.

IAI installed one PW1120 in the starboard nacelle of an F-4E-32-MC of the IDF/AF (Number 334/66-0327) to explore the airframe/powerplant combination for an upgrade program of the F-4E, known as Kurnass 2000 (Heavy Hammer) or Super Phantom and to act as an engine testbed for the Lavi. The powerplant was more powerful, and more fuel efficient than the General Electric J79-GE-17 turbojet normally installed in the F-4E. The structural changes included modifying the air inlet ducts, new powerplant attachment points, new or modified powerplant baydoors, new airframe mounted gearbox with integrated drive generators and automatic throttle system. It also included a modified bleed management and air-conditioning ducting system, modified fuel and hydraulic systems, and a powerplant control/airframe interface. It was first flown on 30 July 1986. Two PW1120 powerplants were installed in the same F-4E and it was flown for the first time on 24 April 1987. This proved very successful, allowing the Kurnass 2000 to exceed Mach 1 without the afterburners, and endowing a combat thrust-to-weight ratio of 1.04 (17 per cent better than the F-4E). This improved sustained turn rate by 15 per cent, climb rate by 36 per cent, medium-level acceleration by 27 per cent and low-level speed with 18 bombs from 1,046 km/h to 1,120 km/h. It was demonstrated at the Paris Air Show in 1987 carrying the show number 229 and civil registration 4X-JPA. However, McDonnell Douglas refused to approve the modification, because it offered a flight performance equal to that of the F/A-18C/D, and endangered any future sales of the F/A-18C/D.

[edit] Specification of the Pratt & Whitney PW1120

  • Performance ratings (ISA, S/L):
  • Static thrust: 6,137 kg. Augmented thrust: 9,337 kg. Mass flow: 80.9 kg. Pressure ratio: 26.8.
  • Specific fuel consumption:
  • Static thrust: 22.7 mg/Ns. Augmentd thrust: 52.65 mg/Ns.
  • Dimensions:
    • Length: 4,110 mm. Maximum diameter: 1,021 mm.
    • Weights: Dry weight: 1,292 kg.
Retrieved from "http://en.wikipedia.org../../../p/r/a/Pratt_%26_Whitney_PW1120_8c46.html"