PMA-3 mine

From Wikipedia, the free encyclopedia

An upside down PMA-3 landmine. Note the edge of the rubber cover and the central plug for the detonator.
An upside down PMA-3 landmine. Note the edge of the rubber cover and the central plug for the detonator.

The PMA-3 is a Yugoslavian blast resistant minimum metal anti-personnel mine. It is circular, consisting of a plastic upper and lower half joined together by a rubber cover. A safety collar is normally wrapped around the outside of the mine, preventing the upper half of the mine tilting when in transit. Once deployed the safety collar is removed. Sufficient pressure on the top surface of the mine causes it to tilt. The tilting drives a pin through a friction sensitive compound triggering the mine's detonator and then main charge.

Straight downward pressure does not have the shearing component needed to trigger the mine, this gives the mine blast resistance, since blast overpressure bears down evenly on the top surface of the mine.

The mine has a relatively low explosive content so will maim rather than kill. Its blast resistantance combined with the lack of metal in the mine make it extremely difficult to clear.

The mine is found in Albania, Bosnia, Cambodia, Chad, Chile, Croatia, Kosovo, Lebanon, Namibia and Peru

[edit] Specifications

  • Height: 40 mm
  • Diameter: 111 mm
  • Weight: 0.18 kg
  • Explosive content: 0.035 kg of Tetryl or possibly TNT

[edit] References

  • Jane's Mines and Mine Clearance 2005-2006
  • Brassey's Essential Guide to Anti-Personnel Landmines
  • PMA-3 mine at ORDATA