Parachute (smoking)

From Wikipedia, the free encyclopedia

[edit] Materials Needed

1.Bottle

2.Tape

3.Scissors

4.Bag

5.Bowl (drug culture)

[edit] Production

Make a hole in the lid of the bottle just big enough to fit the stem of the bowl inside it. If it is to loose it will not hit (recreational drug use). Cut the bottom 2 inches off the bottle and discard. When looking for a bag, look for a long, skinny, and thin bag. The bag will have to be able to fit fully inside the bottle. Tape the top of the bag to the bottom of the bottle. Where the bag connects to the bottle should be completely air tight. Put the lid (with bowl) back on the bottle. Take the bottom if the bag and tape it together so it makes a small handle that is accessible from inside the bottle.

[edit] Smoking (brewing chutes)

Suck the bag into the bottle and place lid (with bowl) on the bottle. Fill the bowl with desired substance. When brewing chutes light the bowl while pulling the bag out of the bottle very slowly. While doing this there shuld be smoke filling up inside the bottle. When the bag is fully out of the bottle unscrew the lid and suck the bag back up into the bottle. Hold in as long as possible and exhale.