Orbital hybridisation

From Wikipedia, the free encyclopedia

Four sp3 orbitals.
Four sp3 orbitals.
Three sp2 orbitals.
Three sp2 orbitals.

In chemistry, hybridisation or hybridization (see also spelling differences) is the concept of mixing atomic orbitals to form new hybrid orbitals suitable for the qualitative description of atomic bonding properties. Hybridised orbitals are very useful in the explanation of the shape of molecular orbitals for molecules. It is an integral part of valence bond theory and the valence shell electron-pair repulsion (VSEPR) theory.[1][2]

Contents

[edit] Historical development

The hybridisation theory was promoted by chemist Linus Pauling[3] in order to explain the structure of molecules such as methane (CH4). Historically, this concept was developed for such simple chemical systems but the approach was later applied more widely, and today it is considered an effective heuristic for rationalizing the structures of organic compounds.

Hybridization theory is, however, considered less useful and less informative than Molecular Orbital Theory. Problems with hybridization are especially notable when the d orbitals are involved in bonding, as in coordination chemistry and organometallic chemistry. Although hybridisation schemes in transition metal chemistry can be used, they are not accurate and have little predictive power.

It is important to note that orbitals are a model representation of the behavior of electrons within molecules. In the case of simple hybridisation, this approximation is based on the atomic orbitals of hydrogen. Hybridised orbitals are assumed to be mixtures of these atomic orbitals, superimposed on each other in various proportions. Hydrogen orbitals are used as a basis for simple schemes of hybridisation because it is one of the few examples of orbitals for which an exact analytic solution to its Schrödinger equation is known. These orbitals are then assumed to be slightly, but not significantly distorted in heavier atoms, like carbon, nitrogen, and oxygen. Under these assumptions is the theory of hybridisation most applicable. It must be noted, that one does not need hybridisation to describe molecules, but for molecules made up from carbon, nitrogen and oxygen (and to a lesser extent, sulfur and phosphorus) the hybridisation theory/model makes the description much easier.

The hybridisation theory finds its use mainly in organic chemistry, and mostly concerns C, N and O (and to a lesser extent P and S). Its explanation starts with the way bonding is organized in methane.

[edit] sp3 hybrids

Hybridisation describes the bonding atoms from an atom's point of view. That is, for a tetrahedrally coordinated carbon (e.g. methane, CH4), the carbon should have 4 orbitals with the correct symmetry to bond to the 4 hydrogen atoms. The problem with the existence of methane is now this: Carbon's ground-state configuration is 1s2 2s2 2px1 2py1 or perhaps more easily read:

C\quad   \frac{\uparrow\downarrow}{1s}\;   \frac{\uparrow\downarrow}{2s}\;   \frac{\uparrow\,}{2p_x}\;   \frac{\uparrow\,}{2p_y}\;   \frac{\,\,}{2p_z}

(Note: The 1s orbital is lower in energy than the 2s orbital, and the 2s orbital is lower in energy than the 2p orbitals)

The valence bond theory would predict, based on the existence of two half-filled p-type orbitals (the designations px py or pz are meaningless at this point, as they do not fill in any particular order), that C forms two covalent bonds. CH2. However, methylene is a very reactive molecule (see also: carbene) and cannot exist outside of a molecular system. Therefore, this theory alone cannot explain the existence of CH4.

Furthermore, ground state orbitals cannot be used for bonding in CH4. While exciting a 2s electron into a 2p orbital would theoretically allow for four bonds according to the valence bond theory, (which has been proved experimentally correct for systems like O2) this would imply that the various bonds of CH4 would have differing energies due to differing levels of orbital overlap. Once again, this has been experimentally disproved: any hydrogen can be removed from a carbon with equal ease.

To summarise, to explain the existence of CH4 (and many other molecules) a method by which as many as 12 bonds (for transition metals) of equal strength (and therefore equal length) can be created was required.

The first step in hybridisation is the excitation of one (or more) electrons (we will have a look on the carbon atom in methane, for simplicity of the discussion):

C^{*}\quad \frac{\uparrow\downarrow}{1s}\; \frac{\uparrow\,}{2s}\; \frac{\uparrow\,}{2p_x} \frac{\uparrow\,}{2p_y} \frac{\uparrow\,}{2p_z}

The proton that forms the nucleus of a hydrogen atom attracts one of the valence electrons on carbon. This causes an excitation, moving a 2s electron into a 2p orbital. This, however, increases the influence of the carbon nucleus on the valence electrons by increasing the effective core potential (the amount of charge the nucleus exerts on a given electron = Charge of Core − Charge of all electrons closer to the nucleus).

The combination of these forces creates new mathematical functions known as hybridised orbitals. In the case of carbon attempting to bond with four hydrogens, four orbitals are required. Therefore, the 2s orbital (core orbitals are almost never involved in bonding) mixes with the three 2p orbitals to form four sp3 hybrids (read as s-p-three). See graphical summary below.

becomes C^{*}\quad \frac{\uparrow\downarrow}{1s}\; \frac{\uparrow\,}{sp^3}\; \frac{\uparrow\,}{sp^3} \frac{\uparrow\,}{sp^3} \frac{\uparrow\,}{sp^3}

In CH4, four sp3 hybridised orbitals are overlapped by hydrogen's 1s orbital, yielding four σ (sigma) bonds. The four bonds are of the same length and strength. This theory fits our requirements.

A schematic presentation of hybrid orbitals overlapping hydrogens' s orbitals translates into Methane's tetrahedral shape

An alternative view is: View the carbon as the C4− anion. In this case all the orbitals on the carbon are filled:

C^{4-}\quad \frac{\uparrow\downarrow}{1s}\; \frac{\uparrow\downarrow}{2s}\; \frac{\uparrow\downarrow}{2p_x} \frac{\uparrow\downarrow}{2p_y} \frac{\uparrow\downarrow}{2p_z}

If we now recombine these orbitals with the empty s-orbitals of 4 hydrogens (4 protons, H+) and allow maximum separation between the 4 hydrogens (i.e. tetrahedral surrounding of the carbon), we see that at any orientation of the p-orbitals, a single hydrogen has an overlap of 25% with the s-orbital of the C, and a total of 75% of overlap with the 3 p-orbitals (see that the relative percentages are the same as the character of the respective orbital in an sp3-hybridisation model, 25% s- and 75% p-character).

According to the orbital hybridization theory the valence electrons in methane should be equal in energy but its photoelectron spectrum [4] shows two bands, one at 12.7 eV (one electron pair) and one at 23 eV (three electron pairs). This apparent inconsistency can be explained when one considers additional orbital mixing taking place when the sp3 orbitals mix with the 4 hydrogen orbitals.

[edit] sp2 hybrids

Other carbon based compounds and other molecules may be explained in a similar way as methane. Take, for example, ethene (C2H4). Ethene has a double bond between the carbons. The Lewis structure looks like this:

Ethene Lewis Structure. Each C bonded to two hydrogens and one double bond between them.

Carbon will sp2 hybridise, because hybrid orbitals will form only σ bonds and one π (pi) bond is required for the double bond between the carbons. The hydrogen-carbon bonds are all of equal strength and length, which agrees with experimental data.

In sp2 hybridization the 2s orbital is mixed with only two of the three available 2p orbitals:

C^{*}\quad \frac{\uparrow\downarrow}{1s}\; \frac{\uparrow\,}{sp^2}\; \frac{\uparrow\,}{sp^2} \frac{\uparrow\,}{sp^2} \frac{\uparrow\,}{p}

forming a total of 3 sp2 orbitals with one p-orbital remaining. In ethene the two carbon atoms form a σ bond by overlapping two sp2 orbitals and each carbon atoms forms two covalent bonds with hydrogen by ssp2 overlap all with 120° angles. The π bond between the carbon atoms perpendicular to the molecular plane is formed by 2p–2p overlap.

The amount of p-character is not restricted to integer values, i.e. hybridisations like sp2.5 are also readily described. In this case the geometries are somewhat distorted from the ideally hybridised picture. For example, as stated in Bent's rule, a bond tends to have higher p-character when directed toward a more electronegative substituent.

[edit] sp hybrids

The chemical bonding in compounds such as alkynes with triple bonds is explained by sp hybridization.

C^{*}\quad \frac{\uparrow\downarrow}{1s}\; \frac{\uparrow\,}{sp}\; \frac{\uparrow\,}{sp} \frac{\uparrow\,}{p} \frac{\uparrow\,}{p}

In this model the 2s orbital mixes with only one of the three p-orbitals resulting in two sp orbitals and two remaining unchanged p orbitals. The chemical bonding in acetylene (C2H2) consists of spsp overlap between the two carbon atoms forming a σ bond and two additional π bonds form by pp overlap. Each carbon also bonds to hydrogen in a sigma ssp overlap at 180° angles.

[edit] Hybridisation and molecule shape

Using hybridisation, along with the VSEPR theory, helps to explain molecule shape:

  • AX1 (eg, LiH): no hybridisation; trivially linear shape
  • AX2 (eg, BeCl2): sp hybridisation; linear or diagonal shape; bond angles are cos−1(−1) = 180°
  • AX3 (eg, BCl3): sp2 hybridisation; trigonal planar shape; bond angles are cos−1(−1/2) = 120°
  • AX4 (eg, CCl4): sp3 hybridisation; tetrahedral shape; bond angles are cos−1(−1/3) ≈ 109.5°
  • AX5 (eg, PCl5): sp3d hybridisation; trigonal bipyramidal shape
  • AX6 (eg, SF6): sp3d2 hybridisation; octahedral (or square bipyramidal) shape

This holds if there are no lone electron pairs on the central atom. If there are, they should be counted in the Xi number, but bond angles become smaller due to increased repulsion. For example, in water (H2O), the oxygen atom has two bonds with H and two lone electron pairs (as can be seen with the valence bond theory as well from the electronic configuration of oxygen), which means there are four such 'elements' on O. The model molecule is, then, AX4: sp3 hybridization is utilized, and the electron arrangement of H2O is tetrahedral. This agrees with the shape, we know water has a non-linear, bent structure, with an angle of 104.5 degrees (the two lone-pairs are not visible).

[edit] Hybridization theory vs. MO theory

Hybridization theory is an integral part of organic chemistry and in general discussed together with molecular orbital theory in advanced organic chemistry textbooks although for different reasons. One textbook notes that for drawing reaction mechanisms sometimes a classical bonding picture is needed with 2 atoms sharing two electrons [5]. It also comments that predicting bond angles in methane with MO theory is not straightforward. Another textbook treats hybridization theory when explaining bonding in alkenes [6] and a third [7] uses MO theory to explain bonding in hydrogen but hybridization theory for methane.

Although the language and pictures arising from Hybridization Theory, more widely known as Valence Bond Theory, remain widespread in synthetic organic chemistry, this qualitative analysis of bonding has been largely superseded by Molecular Orbital Theory in other branches of chemistry. For example, inorganic chemistry texts have all but abandoned instruction of hybridization, except as a historical footnote.[8][9] One specific problem with hybridization is that it incorrectly predicts the photoelectron spectra of many molecules, including such fundamental species such as methane and water. From a pedogical perspective, hybridization approach tends to over-emphasize localization of bonding electrons and does not effectively embrace molecular symmetry as does MO Theory.

[edit] References

  1. ^ Clayden, Greeves, Warren, Wothers. Organic Chemistry. Oxford University Press (2001), ISBN 0-19-850346-6.
  2. ^ Organic chemistry John McMurry 2nd Ed. ISBN 0-534-07968-7
  3. ^ L. Pauling, J. Am. Chem. Soc. 53 (1931), 1367
  4. ^ photo electron spectrum of methane 1 photo electron spectrum of methane 2
  5. ^ Organic Chemistry. Jonathan Clayden, Nick Greeves, Stuart Warren, and Peter Wothers 2001 ISBN 0-19-850346-6
  6. ^ Organic Chemistry, Third Edition Marye Anne Fox James K. Whitesell 2003 ISBN 978-0-7637-3586-9
  7. ^ Organic Chemistry 3rd Ed. 2001 Paula Yurkanis Bruice ISBN 0-13-017858-6
  8. ^ G. L. Miessler and D. A. Tarr “Inorganic Chemistry” 3rd Ed, Pearson/Prentice Hall publisher, ISBN 0-13-035471-6.
  9. ^ Shriver, D. F.; Atkins, P. W.; Overton, T. L.; Rourke, J. P.; Weller, M. T.; Armstrong, F. A. “Inorganic Chemistry” W. H. Freeman, New York, 2006. ISBN 0-7167-4878-9.

[edit] See also

[edit] External links