Nuvistor

From Wikipedia, the free encyclopedia

RCA 6DS4 "Nuvistor" triode vacuum tube, ca. 20 mm high and 11 mm in diameter.
RCA 6DS4 "Nuvistor" triode vacuum tube, ca. 20 mm high and 11 mm in diameter.

The nuvistor is a type of vacuum tube announced by RCA in 1959. Most nuvistors are basically thimble shaped, but somewhat smaller than a thimble. Triodes and tetrodes were made, although tetrode nuvistors are rare. The tube is made entirely of metal and ceramic. Making nuvistors requires special equipment, since there is no intubation to pump gases out of the envelope. Instead, the entire structure is assembled, inserted into its metal envelope, sealed and processed in a large vacuum chamber with simple robotic devices.

Nuvistors are among the highest performing small signal receiving tubes. They feature excellent VHF and UHF performance plus low noise figures, and were widely used in 1960s televisions (beginning with RCA's "New Vista" line of color sets), radio equipment and high-fidelity equipment, primarily in RF sections. They competed with the solid state revolution, and along with GE's Compactron, probably held it at bay for a few years. One famous application was in the Ampex MR-70, a costly studio tape recorder whose entire electronics section was based on nuvistors.

Example Nuvistor types:

  • 7586 - First one released, medium mu triode
  • 7587 - Sharp cutoff tetrode
  • 8056 - triode for low plate voltages
  • 8058 - triode, with plate cap & grid on shell, for UHF performance
  • 7895 - 7586 with higher mu
  • 6CW4 - high mu triode, most common one in consumer electronics
  • 6DS4 - remote cutoff 6CW4
  • 6DV4 - medium mu, intended as UHF oscillator, shell sometimes gold plated
In other languages