NOACK volatility

From Wikipedia, the free encyclopedia

This article or section does not adequately cite its references or sources.
Please help improve this article by adding citations to reliable sources. (help, get involved!)
Any material not supported by sources may be challenged and removed at any time. This article has been tagged since October 2006.

There are very few or no other articles that link to this one.
Please help introduce links in articles on related topics. After links have been created, remove this message.
This article has been tagged since November 2006.

Volatization is a term used to describe what happens to a fluid as it is heated to the point it begins to "boil off." Upon reaching a certain temperature, oil will begin to lose some of its lighter weight molecules as they "boil off" and leave heavier weight molecules behind. Not only does this cause higher oil consumption, this process can also cause increased viscosity making the oil more difficult to circulate through the lubrication system.

The ASTM D-5800 (Noack) is a widely accepted method of measuring volatility. Originally developed and used in Europe, the Noack test determines how much weight loss an oil experiences through volatization. AMSOIL INC. was the first in the United States to use and report Noack results in 1984.

In the Noack test the oil is heated to 150° C for a specified period. The lighter oil fractions will "boil-off," leading eventually to oil consumption, oil thickening and a loss of performance. The test reports results in the percentage, by weight, lost due to "boil-off."

For example, before July 1, 2001, 5W-30 motor oil in the United States could lose up to 22 percent of its weight and still be regarded as "passable." Now, with GF-3, the maximum Noack volatility for API licensing is 15 percent. European standards limit high quality oils to a maximum of 13 percent loss. AMSOIL 5W-30 Synthetic Motor Oil loses only 4.9 percent of its weight, reducing oil consumption, oil thickening and retaining performance.

[edit] NOACK Volatility (ASTM D-5800)

The NOACK Volatility Test determines the evaporation loss of lubricants in high temperature service. The more motor oils vaporize, the thicker and heavier they become, contributing to poor circulation, reduced fuel economy and increased oil consumption, wear and emissions. A maximum of 15 percent evaporation loss is allowable to meet API SL and ILSAC GF-3 specifications. As shown in the graph, AMSOIL 10W-30 Synthetic Motor Oil outperformed its nearest competitor by over 30 percent.

The extremely low volatility of AMSOIL Synthetic 10W-30 Motor Oil allows it to maintain its superior protective and performance qualities throughout extended drain intervals, even when faced with severe operating temperatures. In addition, oil consumption and emissions are minimized and fuel efficiency is maximized.