MOS Technology 8568

From Wikipedia, the free encyclopedia

The 8568 Video Display Controller (VDC), less commonly known as the DVDC, D = "Digital", was MOS Technology's graphics chip responsible for the "80 column"^[1] (or "RGBI") display on D[CR] models of the Commodore 128 personal computer. (The original C128 used the 8563 VDC chip.)

The Commodore 128 had two video display modes, which were usually used singularly, but could be used simultaneously if the computer was connected to both a "40 column" and an "80 column" display. The VIC-II chip, also found in the Commodore 64, was mapped directly into main memory—that is, the video memory and CPUs (the 8502 and Z80A processors) shared a common 128 KiB RAM, and the VIC-II control registers were accessed as memory locations (i.e., they were memory mapped).

The secondary display controller, the [D]VDC, had a smaller set of control registers which were accessed via memory locations, and were only available when the computer was in native mode (and not in the "GO64" Commodore 64 emulation mode). Similar in programming to early IBM MDA, CGA, and EGA boards, the [D]VDC had its own dedicated video RAM. Depending on the date of manufacture of the particular machine, this could be either 16 or 64 KiB. Text or graphics to be displayed were loaded into the [D]VDC memory byte-by-byte through the control registers.

[edit] Notes

↑ In Commodore 128 terminology, the VIC-II display was called the "40 column" display, and the [D]VDC, "80 column," due to the number of columns of fixed-pitch text that could be natively displayed.