Model aircraft
From Wikipedia, the free encyclopedia
![A Die Cast Boeing 747 static model.](../../../upload/thumb/3/34/DieCastModelsWIKI1.jpg/300px-DieCastModelsWIKI1.jpg)
Model aircraft are flying or non-flying models of existing or imaginary aircraft, often scaled down versions of full size planes, using materials such as balsa wood, foam and fiberglass. A vast array of designs are possible, from very simple gliders, to highly accurate scale models, some of which can be very large.
Models may be built either as static non-flying models, or as flying models (also known as aeromodelling). Construction techniques for the two are usually very different.
Contents |
[edit] Static model aircraft
Static model aircraft, those not intended to fly, are scale models commonly built using plastic, wood, metal or paper. Some static models are scaled for use in wind tunnels, where the data acquired is used to aid the design of full scale aircraft.
Collectors can buy models that already been built and painted, models that require construction, painting and gluing, or models that have been painted but need to be snapped together. Snap models are often cheap and break esialy. Snap models are becoming increasingly popular because so easy to put together. Most of the world's airlines allow their fleet aircraft to be modeled as a form of publicity.[1] In the early days, airlines would order large models of their aircraft and ship them to travel agencies as a promotional item. These models are the most prized collectibles. The most expensive aircraft models in the world is a Boeing 707 made in the 1/10 scale, valued at US$18,000.
[edit] Manufacturers
The most popular static, plastic plane kit manufacturers in the United States, the United Kingdom and France are Revell-Monogram, Airfix and Heller, respectively.[2] The 1970s saw the peak of the plastic modeling hobby.[citation needed] During the 1980s, the popularity of computer games forced many of model manufacturers to radically downsize, restructure, merge, or go out of business.[3]
[edit] Scale
In static models, the most popular scale is 1:72 for small aircraft and 1:144 for large aircraft,[4] but the following exceptions are interesting. The preferred scale for single-engine World War II aircraft is 1:48 scale since it provides the opportunity for more detail.[citation needed] The now Franklin Mint (aka Armour Models) also prefers the 1:48 scale for many of its die-cast models. It sometimes referred to a quarter scale because a quarter inch equals one foot. More detailed models are available at 1:32 and 1:24. Some Soviet manufacturers attempted to supplant the 1:48 scale with the 1:50 scale and the 1:32 with the 1:30 scale. The Japanese offered the scale 1:100. Europeans are attempting to supplant the 1:144 with the 1:150 preferring multiples of ten to multiples of 12. The French firm Heller SA is only manufacturer in the world to offer models in the scale 1:125. Herpa and others produce promotional models for airlines in various scales, including 1:200, 1:400, 1:500, 1:1000 and more. A few First World War aircraft were offered at 1:28 by Aurora. Other scales, which failed to catch on, are 1:64, 1:96, and 1:128; however, old moulds are often revived in these scales. Many older plastic models, such as those built by Revell do not conform to any established scale. They are sized to fit inside standard sized boxes. These kits are often called "box-scale" and are often reissued in their original, unusual scales.[5] Some helicopters used to be offered in 1:32 scale, similar to some fixed-wing aircraft models. Now, the trend is to issue helicopters in 1:35 scale, similar to most land vehicles models.
[edit] Media
Due to the high initial costs of producing hardened steel molds, there are relatively few manufacturers of injection-molded plastic models. Smaller manufacturers often produce models of lesser-known subjects by this technique. They may produce accessories to enhance mainstream kits, but the very high quality molded kits of mainstream subjects have only been released by a few companies.[6] Most small manufacturers control costs by producing kits using lower quality molds, vacuum formed plastic or resin casting. A world-wide cottage industry supplies improved and additional parts in resin, photo etched metal,[7] vacuum formed plastic, wire, printed plastic and paper, decals, paints, magazines, books and tools to support the kit builder. Vacuum formed kits are generally for the more skilled builder and are manufactured by small companies.[8] Specialized kits cast in resin are available from companies such as Anigrand, Collect Aire, CMK, and Unicraft. Another category of scale plane models made from heavy paper or card stock. Several card model kit companies exist, smaller even than vacuum formed manufacturers, among them being [9] Many card models are also distributed through the internet, and several are offered this way free of charge. Card model kits are also not limited to just aircraft. Such kits are available for all types of vehicles, buildings, computers, firearms and animals. Die-Cast model plane manufacturers include Dyna-Flytes (recognized as the first manufacturer of that type of model), Schabak, Gemini Jets and Herpa Wings. Snap Fit plastic plane models are manufactured by Wooster, Long Prosper, and Flight Miniatures.
[edit] Flying model aircraft
Flying models are usually what is meant by the term aeromodelling. Most flying model aircraft can be placed in one of three groups:
- Free flight (F/F) model aircraft are designed and built in a manner that allows the craft to fly without any attachment to the ground.
This type of model pre-dates the efforts of the Wright Brothers [1] and other pioneers. - Control line (C/L) model aircraft are designed and built to be flown using cables (usually two) leading from the wing to the pilot. A variation of this system is the Round-the-pole flying (RTP) model.
- Radio-controlled aircraft have a transmitter operated by the pilot on the ground, sending signals to a receiver in the craft.
Some flying models resemble scaled down versions of piloted aircraft almost as much as static models do, while others are built with no intention of looking like piloted aircraft. There are also models of birds and flying dinosaurs. One company, Flying ThingZ of Stroudsburg, Pennsylvania, makes a line of rather whimsical models in addition to a lineup of conventional aircraft. Their more unusual offerings, produced from laser-cut corrugated plastic include a witch on a broomstick, a flying M1A2 Abrams tank, a flying race car and even a 2/3-scale flying lawnmower.
[edit] Construction
The construction of flying models is very different from most static models. Flying models borrow construction techniques from vintage full-sized aircraft (although models rarely use metal structures.) These might consist of forming the frame of the model using thin strips of light wood such as balsa, then covering it with fabric and subsequently doping the fabric to form a light and sturdy frame which is also airtight. For very light models, very thin paper can be substituted for fabric. Or, heat-curing plastic films ("heat shrink covering" or "solarfilm") can be ironed on — a hand-held iron causes the film to shrink and adhere to the frame. A hair dryer can also be used.
Home-grown model-construction techniques consist of using formers and longerons for the fuselage, and spars and ribs for the wings and tail surfaces. More robust designs often use solid sheets of wood to form these instead, or might employ a composite wing consisting of an expanded polystyrene core laminated with a surface veneer of wood, often obechi, which protects the core and provides strength. Such designs tend to be heavier than an equivalent sized model built using the traditional method, and would be much more likely to be found in a power model than a glider.
The lightest models are suitable for indoor flight, in a windless environment. Some of these are made by bringing frames of balsa wood and carbon fiber up through water to pick up thin plastic films, similar to rainbow colored oil films. The advent of "foamies," or craft injection-molded from lightweight foam and sometimes reinforced with carbon fiber, have made indoor flight more readily accessible to hobbyists. Many come ready-to-fly, requiring little more than attachment of the wing and landing gear. See: ParkZone Slo-V.
Flying models can be built from scratch using published plans, or assembled from kits. Plans are intended for the more experienced modeller, since all parts must be sourced separately. The kit contains most of the raw material for an unassembled plane, a set of (sometimes elaborate) assembly instructions, and a few spare parts to allow for builder error. Assembling a model from plans or a kit can be very labour-intensive. In order to complete the construction of a model, the builder typically spends many hours assembling the frame, covering it, and polishing/refining the control surfaces for correct alignment. Furthermore, the kit does not include necessary tools, and these have to purchased separately. Finally, a single overlooked error during assembly could compromise the model's airworthiness, leading to disaster.
To address these concerns, and increase the hobby's accessibility to the inexperienced and less interested alike, vendors of model aircraft introduced Almost Ready to Fly (ARF) designs. Compared to a traditional kit design, an ARF design reduces the amount of time, skill, and tooling required to assemble the model. The average ARF aircraft can be built with less than 4 hours of labor, versus 10-20+ for a traditional kit aircraft. More recently, Ready To Fly (RTF) radio control aircraft have all but eliminated assembly time (at the expense of the model's configuration options.) Among traditional hobbyist builders, RTF models are a point of controversy, as many consider model assembly as integral to the hobby. Brands associated with these types of aircraft include Great Planes, Hobbico, Carl Goldberg Products, Lanier RC, E-Flite, Hangar 9, GWS, HobbyZone and ParkZone Tower Hobbies.
[edit] Gliders
Gliders are aircraft with no attached powerplant. Model gliders are usually hand-launched or catapult-launched (using an elastic bungee.) The newer "discus" style of wingtip handlaunching has largely supplanted the earlier "javelin" type of launch. Other launch methods include ground based power winches, hand-towing, and towing aloft using a second powered aircraft. As gliders are unpowered, flight must be sustained through exploitation of the natural wind in the environment. A hill or slope will often produce updrafts of air which will sustain the flight of a glider. This is called slope soaring, and when piloted skillfully, RC gliders can remain airborne for as long as the updraft prevails. Another means of attaining height in a glider is exploitation of thermals, which are bubbles or columns of warm rising air created by hot spots on the ground. As with a powered aircraft, lift is obtained by the action of the wings as the aircraft moves through the air, but in a glider, height can only be gained by flying through air that is rising faster than the aircraft is sinking relative to the airflow.
Sailplanes are flown using available thermal lift. As thermals can only be indirectly observed through the reaction of the aircraft to the invisible rising air currents, pilots find sailplane flying challenging and rewarding.
Walkalong gliders are light weight model airplanes flown in the Ridge lift produced by the pilot following in close proximity. In other words, the Glider is Slope soaring in the updraft of the moving pilot.
[edit] Power sources
Powered models contain an onboard powerplant to propel the aircraft through the air. The model is usually powered by an electric motor or small piston engine, but other types of propulsion are also used. These include rockets, small turbines, pulsejets, compressed gas engines and twisted rubber bands.
[edit] Old and cold
An old method of powering free flight models is Alphonse Pénaud's elastic motor, essentially a long rubber band that is wound up prior to flight. It is the most widely used powerplant for model aircraft, found on everything from children's toys to serious competition models. The elastic motor offers extreme simplicity and survivability, but suffers from limited running time, an exponential reduction of thrust over the motor's operational cycle, and it places substantial stress on the fuselage.
Stored compressed gas (CO2), similar to filling a balloon and then releasing it, also powers simple models.
A more sophisticated use of compressed CO2 is to power a piston expansion engine, which can turn a large, high pitch prop. These engines can incorporate speed controls and multiple cylinders, and are quite capable of powering lightweight scale radio control aircraft. Gasparin and Modella are two current makers of CO2 engines. CO2, like rubber, is known as "cold" power because it becomes cooler when running, rather than hotter as combustion engines and batteries do. Thermodynamically, this means that it stores negative entropy, rather than energy, and extracts heat energy from the surrounding environment.
Steam, which is even older than rubber power, and like rubber, contributed much to aviation history, is now rarely used. Steam power is not now commonly considered in connection with flight. (In 1848, John Stringfellow flew a steam-powered model, in Chard, Somerset, England. Hiram Stevens Maxim later showed that steam can even lift a man into the air. Samuel Pierpont Langley built steam as well as internal combustion models that made long flights.)
Baronet Sir George Cayley built, and perhaps flew, internal and external combustion gunpowder-fueled model aircraft engines in 1807, 1819 and 1850. These had no crank, working ornithopter-like flappers instead of a propeller. He speculated that the fuel might be too dangerous for manned aircraft.
[edit] Internal combustion
![An internal combustion powered model aircraft.](../../../upload/thumb/5/56/GASMODEL_WIKI.jpg/300px-GASMODEL_WIKI.jpg)
For larger and heavier models, the most popular powerplant is the glow engine, a form of internal combustion engine. Glow-engines appear similar to small gasoline motorcycle-engines, but glow-engines are considerably simpler in operation. The simplest (and cheapest) glow-engines being a two-stroke cycle engine, using a glow plug to ignite fuel, which is a mixture of slow burning methanol, nitromethane, and lubricant (castor oil or synthetic oil.) Initial ignition is from an external electric current but once reciprocating, the engine heat, pressure and catalizing action of a platinum metal coil in the glow plug are sufficient to keep igniting the fuel. The four stroke glow engines (see below) with alternate intake and exhaust cycles also rely on the same fuel and ignition system. The reciprocating action of the cylinders applies torque to a crankshaft, which is the power-output of the engine. Vendors of model engines rate size in terms of engine displacement. Common sizes range from as small as 0.01 cubic inch (in3) to over 1.0 in3 (0.16 cc–16 cc). As Richard Feynman mentioned in his famous There's Plenty of Room at the Bottom lecture, the speed an engine can rotate without breaking tends to go as the inverse of the linear dimension (inverse cube root of the displacement). However, the intake air flow improves less quickly than that with small scale, due to decreasing Reynolds number and, eventually, to viscous flow. Under ideal conditions, the smallest .01 engines can turn a 3.5" (9 cm) propeller at speeds over 30,000 rpm, while the typical larger (.40-.60 cubic inch) engine will turn at 10-14,000 rpm.
Not all simple internal combustion model aircraft engines use glow plugs. There are also "diesels", that are popular in Europe and the world over. These are, strictly speaking, compression ignition engines. These also are carbureted, not fuel injected. They have an adjustable compression ratio using a threaded T screw on the cylinder head bearing onto a contra piston within the cylinder bore. They burn a more easily ignited mixture of ether and kerosene (with lubricating oil). These are preferred for endurance competition, because of the higher energy content of the fuel.
Internal combustion (IC) engines are also made in upscale (and up-price) configurations. Variations include four-strokes, multi-cylinder engines, and even spark ignition gasoline powered units. All IC engines generate substantial noise (and engine exhaust) and require routine maintenance. In the 'scale-R/C' community, glow-engines have long been the mainstay until recently.
[edit] Jet and rocket
A recent development is the use of small jet turbine engines in hobbyist models, both surface and air. Model-scale turbines resemble simplified versions of turbojet engines found on commercial aircraft, but are in fact new designs (not based upon scaled-down pre-existing commercial jet engines.) The first hobbyist-developed turbine was developed and flown in the 1980s by Gerald Jackman in England, but only recently has commercial production made turbines readily-available for purchase. Turbines require specialized design and precision-manufacturing techniques (some designs for model aircraft have been built from recycled turbocharger units from car engines), and consume a mixture of A1 jet fuel and synthetic motorcycle-engine oil. These qualities, and the turbine's high-thrust output, makes owning and operating a turbine-powered aircraft prohibitively expensive for most hobbyists. Jet-powered models attract large crowds at organized events; their authentic sound and high-speed make for excellent crowd pleasers.
Pulse jet engines, operating on the same principle as the WW II V-1 flying bomb have also been used. The extremely-noisy pulsejet offers more thrust in a smaller package than a traditional glow-engine, but is not widely used. A popular model was the "Dynajet".
Rocket engines are sometimes used to boost gliders and sailplanes. In the 1950s, a type of model rocket motor called the Jetex engine was quite popular. Solid fuel pellets were used, ignited by a wick fuse. The motors came back on the market several years ago and still have a following. Today, flyers mount readily-available model rocket engines to provide a single, short (<10second) burst of power. There are power categories rated A, B, C etc. Although government regulations and restrictions initially rendered rocket-propulsion unpopular, even for gliders; now though their use is expanding particularly in scale model rocketry. Self regulation of the sport and widespread availability of the 'cartridge' motors ensures a healthy future.
[edit] Electric power
In electric-powered models, the powerplant is a battery-powered electric motor. Throttle control is achieved through an electronic speed control (ESC), which regulates the motor's output. The first electric models were equipped with DC-brushed motors and rechargeable packs of nickel cadmium (NiCad), giving modest flight times of 5-10 minutes. (A fully-fueled glow-engine system of similar weight and power would likely provide double the flight-time.) Later electric systems used more-efficient brushless DC motors and higher-capacity nickel metal hydride (NiMh) batteries, yielding considerably improved flight times. The recent development of lithium polymer batteries (LiPoly or LiPo) now permits electric flight-times to approach, and in many case surpass that of glow-engines. There is also solar powered flight, which is becoming practical for R/C hobbyists. In June 2005 a new record of 48 hours and 16 minutes was established in California for this class.
Electric-flight was tested on model aircraft in the 1970s, but high-cost prevented widespread adoption within the industry until the early 1990s, where falling costs of motors, control systems and, crucially, more practical battery technologies came on the market. Electric-power has made substantial inroads into the park-flyer and 3D-flyer markets. Both markets are characterized by small and lightweight models, where electric-power offers several key advantages over IC: greater efficiency, higher reliability, less maintenance, much less messy and quieter flight. The 3D-flyer especially benefits from the near-instantaneous response of an electric-motor. As the size of a model aircraft increases, the cost of electric-flight increases much more rapidly than traditional glow-engine flight. As of 2005, an electric-flight conversion for mid-large scale-models (above 0.60in3(10cc) glow-engine) is prohibitively expensive (>$400 USD.) Most such models remain powered by the venerable glow-engine, as their pilots prefer the sound and smell of a genuine 2 or 4-stroke IC-engine.
[edit] Control Line
Also referred to as U-Control in the USA, introduced by the Stanzel brothers in Texas during early 1940. It was pioneered and poularized by the late Jim Walker who often, for show, flew three models at a time! Normally the model is flown in a circle and controlled by a pilot in the center holding a handle connected to two thin steel wires. The wires connect through the inboard wing tip of the plane to a mechanism that translates the handle movement to the aircraft elevator, allowing maneuvers to be performed along the aircraft pitch axis. The pilot will turn to follow the model going round, the convention nowadays being anti-clockwise to utilize the gyroscopic motor couple in assisting line tension, together with rudder offset and other means. Over the years since its introduction, control line flying has developed into a high level competition sport.
There are four main contest categories for control line models: Speed, Aerobatics, Team Racing and Combat.
The international rules are defined by the Fédération Aéronautique Internationale (FAI). World and Continental (presently only European) Championships are held with semiannual interleaving. The World Championships were held here in Sweden in July 1996. 2004 they took place in Muncie, IN, USA, and in 2006 it is Spain's turn. In addition to the international categories there are also national variants. The international rules are available from FAI.
- Speed
- Aerobatics
Team Race — the Formula One of aeromodelling The international class is F2C. A pilot and a mechanic compete as a team to fly small (370 grams)(13 oz.) 65 cm (25 in.) wingspan semi-scale racing models over a tarmac or concrete surface. Lines are 15.92 meters long (52.231 ft). Three pilot + mechanic teams compete simultaneously in the same circle, and the object is to finish the determined course as fast as possible. The all-out important catch is that tank size is limited to 7 cc. Thus 2-3 pitstops for refueling are needed during the race. The mechanic stands at a pit area outside the marked flight circle. The engine will be started and the model released at the start signal. For refuelling, the pilot will operate a fuel shutoff by a quick down elevator movement after the planned number of laps so that the model can approach the mechanic at optimum speed, around 50 km/h (30 mph). The mechanic will catch the model by the wing, fill the tank from a pressurized can by a hose and finger valve, then restart the engine by hitting the carbon fiber/epoxy resin propeller with his finger. Ground time of a good pitstop is less than three seconds. The race course is 10 km, corresponding to 100 laps. Flying speeds are around 200 km/h (125 mph), which means that the pilots have to turn one lap in 1.8 seconds. Line pull due to centrifugal force is 85 N (17 lb) (19 g:s). A faster model will overtake by the pilot steering it above the slower one while he moves his handle with lines over the opponent pilot's head. Conduct of both pilots and mechanics is subject to numerous regulations.
After two rounds of elimination heats, the 6, 9 or 12 fastest teams enter two semifinal rounds, and the three fastest teams in the semifinals go to the final, which is run over the double course. Maximum engine size is 2.5 cc (.15 cu.in.). Diesel, i.e. compression ignition engines are used. They are single cylinder two-stroke, designed and highly specialized for this purpose. At the world championship level it is not uncommon that the competitors design and build their own engines. Their output power is approaching .8 horsepower at 25,000 rpm.
[edit] Airscrew types
Most powered model-aircraft, including electric, internal-combustion, and rubber-band powered models, generate thrust by spinning an airscrew. By far, the propeller is the most commonly used device. A propeller has basically the same shape as the wing of an aircraft, creating underpressure at the curved side while maintaining normal airpressure at the flat side, thus the higher pressure pushes the wing upwards or in the case of the propeller, forwards.
[edit] Propellers
As in full-size planes, the propeller's dimensions and placement (along the fuselage or wings) are factored into the design. In general, a large diameter and low-pitch offers greater thrust at low airspeed, while a small diameter and higher-pitch sacrifices thrust for a higher maximum-airspeed. In model aircraft, the builder can choose from a wide selection of propellers, to tailor the model's airborne characteristics. A mismatched propeller will compromise the aircraft's airworthiness, and if too heavy, inflict undue mechanical wear on the powerplant. Model aircraft propellers are usually specified as diameter × pitch, given in inches. For example, a 5x3 propeller has a diameter of 5 inches, and a pitch of 3 inches. The pitch is the distance that the propeller would advance if turned through one revolution in a solid medium. Additional parameters are the number of blades (2 and 3 are the most common).
There are two different methods to transfer rotational-energy from the powerplant to the propellor.
- With the direct-drive method, the propeller is attached directly on the engine's spinning crankshaft (or motor-rotor.) This arrangement is optimum when the propellor and powerplant share overlapping regions of best efficiency (measured in RPM.) Direct-drive is by far the most common when using a fuel-powered engine (gas or glow). Some electric motors with high torque and (comparatively) low RPM's can utilize direct-drive as well. These motors are typically outrunners.
- With the reduction method, the crankshaft drives a simple transmission, which is usually a simple gearbox containing a pinion and spur gear. The transmission decreases the output RPM by the gear ratio (thereby also increasing output torque by approximately the same ratio). Reduction-drive is common on larger aircraft and aircraft with disproportionately large propellers. On such powerplant arrangements, the transmission serves to match the powerplant's and propeller's optimum operating RPM. Geared propellers are rarely used on internal combustion engines, but very commonly on electric motors. This is because most inrunner electric motors spin extremely fast, but have very little torque.
[edit] Ducted Fans
Ducted fans are propellers encased in a cylindrical housing or duct, designed to look like and fit in the same sort of space as a model jet engine but at a much lower cost. They are available for both electric and gas engines, although they have only become widely used with the rise of effective electric power for model aircraft. It is possible to equip a model jet aircraft with two or four electric ducted fans for much less than the cost of a single jet or large gas engine, enabling accurate modeling of planes such as military bombers and civilian airliners.
The fan-unit is an assembly of the spinning fan (a propellor with more blades), held inside a shaped-duct. Compared to an open-air propellor, a ducted-fan generates more thrust per crossectional-area. The shaped-duct often limits installation to recessed areas of the fuselage or wings. Ducted fans are popular with scale-models of jet-aircraft, where they mimic the appearance and feel of jet engines, as well as increasing the model's maximum airspeed. But they are also found on non-scale and sport models, and even lightweight 3D-flyers. Like propellors, fan-units are modular components, and most fan-powered aircraft can accommodate a limited selection of different fan-units.
[edit] Jet power
In jet-powered model aircraft, the engine is a single-piece assembly with no user-changeable parts. The turbine-wheel spins at extremely high speed (>150,000 RPM), limiting most adjustments to the original factory.
[edit] Other
Ornithopters do not use airscrews at all, the reciprocating-motion of the wing structure imitates the flapping-wings of living birds, producing both thrust and lift.
[edit] Model aerodynamics
The flight behavior of an aircraft depends on the scale to which it is built. The Reynolds number depends on scale and speed. Drag is generally greater in proportion at low Reynolds number so flying scale models usually require larger than scale propellers.
Mach number depends on speed. Compressibility of the air is important only at speeds close to or over the speed of sound, so the effect of the difference in Mach number between a slow piloted aircraft and a small model is negligible, but models of jets are generally not efficient flyers. In particular, swept wings and pointed noses are used at high Mach number to reduce compressibility drag and tend to increase drag at small Mach number.
Angular momentum also depends on scale. Since torque is proportional to lever arm length while angular inertia is proportional to the square of the lever arm, the smaller the scale the more quickly an aircraft or other vehicle will turn in response to control or other forces. While it may be possible for a pilot to fly an unstable aircraft (such as a Wright Flyer), a radio control scale model of the same aircraft would only be flyable with the center of gravity moved forward. Static stability, resisting sudden changes in pitch and yaw, is generally required for all models and is usually considered a requirement for piloted aircraft. Dynamic stability is required of all but tactical piloted aircraft.
Free flight models need to have both static and dynamic stability. Static stability is the resistance to sudden changes in pitch and yaw and is typically provided by the horizontal and vertical tail surfaces, respectively, and by a forward center of gravity. The three dynamic stability modes are phugoid, spiral and Dutch roll. An aircraft with too large horizontal tail may have a plugoid with increasing climbs and dives. Insufficient dihedral and sweep back will generally lead to increasing spiral turn. Too much dihedral generally causes Dutch roll. However, these all depend on the scale, as well as details of the shape and weight distribution. For example the paper glider shown here is a contest winner when made of a small sheet of paper but will go from side to side in Dutch roll when scaled up even slightly.
[edit] Footnotes
- ^ Delta Air Lines, Air France, British Airways, Aerolíneas Argentinas, Avianca, Aeroméxico, Fed Ex, Polar Air Cargo, Air New Zealand, Qantas, China Airlines, Singapore Airlines, South African Airways, Finnair, American Airlines, United Airlines, Lufthansa, Japan Airlines, Royal Jordanian, Korean Airlines and Asiana Airlines all allow their fleet of aircraft to be modeled as a form of publicity.
- ^ Other popular manufacturers include Academy, Hobbycraft, Dragon/DML, Italeri, Minicraft, Fujimi, Hasegawa, Tamiya, Trumpeter and Testors.
- ^ Well-known static airpane model manufacturers who are no longer in business include Aoshima, Aurora, Crown, Faller, FROG, ERTL, ESCI, Jo-Han, Hawk, L&S, Matchbox, Otaki, Pyro and VEB Plasticart. Many of their molds have been bought by surviving companies, but original kits are often only available from specialists.
- ^ According to "Fine Scale Modeler" magazine; 1:72 became the standard scale for aircraft when the US War Department (renamed the Department of Defense) requested models of single seat aircraft at that scale. The War Department also requested models of multi-engine aircraft at a scale of 1:144. The War Department was hoping to educate Americans in the proper identification of aircraft. These scales provided the best compromise between size and detail. After WWII, the toy manufactures continued to favor these scales.
- ^ Revell's Wright Flyer was reissued in the original and unusual scale of 1:39.
- ^ Sweet, DACO/Skyline and Eduard have released the few very high quality molded kits of mainstream subjects.
- ^ "Photoetching At Home" by Andy Slater, The Model Makers Resource," accessed 03/30/2007
- ^ Koster Aero Enterprises, Welsh Models, DynaVector, and AirModel manufacture vacuum formed models.
- ^ ModelArt, Halinski, Modelik, JSC, Williamshaven and FlyModel manufacture static models of aircraft in card stock.
[edit] References
- The Great International Paper Airplane Book, by Jerry Mander, George Dippel and Howard Gossage, Simon and Schuster, New York, 1967
- Model Aircraft Aerodynamics, by Martin Simons, Argus, Watford, Herts, England, 1978
- How to Design and Build Flying Model Airplanes, by Keith Laumer, Harper, New York, 1960
- The Middle Ages of the Internal-Combustion Engine, by Horst O. Hardenberg, SAE, 1999
[edit] See also
- Model airport
- Radio-controlled model
- Radio-controlled aircraft
- Aviation history
- List of model aircraft manufacturers
- International Miniature Aerobatic Club
[edit] External links
- How to build a model aircraft
- Tournament Of Champions
- The FAI - The world air sports federation, controlling competition categories and rules
- FiddlersGreen - Downloadable model aircraft
- eHobby RC
- Flying Sites - UK resource for r/c model aviation information
- glue-it.co.uk Aircraft reference images
- Paul K. Guillow, Inc. - Manufacturer of Balsa wood model and toy airplanes.
- High Altitude Glider Project
- Model aircraft glossary
- Academy of Model Aeronautics Model airplane insurance and help getting started
- Model Aeronautics for Dodos: For The Rest of Us- - Radio controlled aircraft
- RCU Videos Radio control videos of airplanes, cars, boats, helis
- rcmarket.net - European portal on model aircraft
- Radio controlled helicopters by Bill Ludwig
- B29 model plane video
- Construction of an Airbus A330 at 1/16 scale, and more
- Pulsejet in aeromodeling