MIL-STD-1760
From Wikipedia, the free encyclopedia
The MIL-STD-1760 communications bus is derived from the earlier MIL-STD-1553 and provides additional safety features such as message integrity validation using CRCs. 1760 is primarily used for "stores management" - this is for communicating with external stores and weapons carried by modern combat aircraft.
Fundamentally, 1760 is a layer on top of 1553 - standard 1553 interfaces can be used with 1760 implementations. All the 1760 specifics can be done in software and written to 1553 message buffers.
1760 also uses external hardware signals to assign the 1553 Remote Terminal address (five bits plus parity) and requires the RT to respond with on the bus with the BUSY bit set in the status word within 150 milliseconds. The RT must be operational and respond without the BUSY bit set within 500 milliseconds. Many 1553 interface products include external RT address lines and can meet the power-up response time requirement of 1760.
Refer to the MIL-STD-1553 entry for details on the lower-level protocol.
NOTE - Need more here on the higher-level 1760 protocols used to define the usage of data words in the 1553 messages.
[edit] External links
- MIL-STD-1760 Standard (PDF)
- MIL-STD-1553/1760 Interface Products (Excalibur Systems, Inc.)
- MIL-STD-1553/1760 Interface Products (Condor Engineering, Inc. now part of GE Fanuc)
- MIL-STD-1553 Tutorial (Condor Engineering)
- DODSSP U.S. Department of Defense Single Stock Point for Military Specifications, Standards and Related Publications
