Labyrinth seal

From Wikipedia, the free encyclopedia

For more uses of the word labyrinth, see Labyrinth (disambiguation)

A labyrinth seal is a mechanical seal that fits around a shaft to prevent the leakage of oil or other fluids.

A labyrinth seal is composed of many straight threads that press tightly inside another shaft, or stationary hole, so that the fluid has to pass through a long and difficult path to escape. Sometimes 'threads' exist on the outer and inner portion. These interlock, to produce the long characteristic path to slow leakage. For labyrinth seals on a rotating shaft, a very small clearance must exist between the tips of the labyrinth threads and the running surface.

Labyrinth seals on rotating shafts provide non-contact sealing action by controlling the passage of fluid through a variety of chambers by centrifugal motion, as well as by the formation of controlled fluid vortices. At higher speeds, centrifugal motion forces the liquid towards the outside and therefore away from any passages. Similarly, if the labyrinth chambers are correctly designed, any liquid that has escaped the main chamber, becomes entrapped in a labyrinth chamber, where it is forced into a vortex-like motion. This acts to prevents its escape, and also acts to repel any other fluid. Because these labyrinth seals are non-contact, they do not wear out.

Turbines use labyrinth seals due to the lack of friction, which is necessary for high rotational speeds.

Labyrinth seals are also found on pistons, which use them to store oil and seal against combustion explosions, as well as on other non-rotating shafts. In these applications, it is the long and difficult path and the formation of controlled fluid vortices plus some limited contact-sealing action that creates the seal.