Kilt

From Wikipedia, the free encyclopedia

A kilt is a traditional garment of Scottish, and by extension Celtic and British, culture that exists in various modern forms and forms inspired by the historical garment, including:

1. The modern form of the traditional Scottish garment;
2. The historical form of this same Scottish garment (see History of the kilt);
3. Various other national forms of the kilt, such as the Irish kilt and the Welsh kilt;
4. The contemporary kilt, such as the Neo-Kilt or Utilikilt; and
5. Certain types of school uniform skirts for girls (see School uniforms).^[1]

Traditionalists emphasize that the plural of "kilt" is "the kilt" rather than "kilts", though the latter term has been used alongside the former and continues to gain acceptance in modern English.^{[citation needed]}

At modern-day Highland games gatherings in Scotland and elsewhere, the modern version of the traditional Scottish kilt is much in evidence. Historical forms of the Scottish kilt have differed in several particulars (some quite substantial) from the modern-day version. With reference to the Scottish kilt, the organizations that sanction and grade the competitions in Highland dancing and bagpiping all have rules governing acceptable attire for the competitors. These rules specify that kilts are to be worn (except that in the national dances, the female competitors will be wearing the Aboyne dress). The word kilt as used in reference to the Scottish form of the kilt in this article refers to those garments as typically seen in such competitions.^[2][3] Differences between the Scottish kilt and other forms will be discussed in the sections related to those other types of kilts.

Depending on the occasion, a kilt is normally worn with accessories such as a belt, jacket, sporran (a type of pouch), special footwear, and — optionally — underwear. These are discussed in the separate article kilt accessories.

Contents 1 The Scottish kilt 1.1 Design and construction 1.1.1 Fabrics 1.1.2 Setts (tartan patterns) 1.1.3 Measurements 1.1.4 Pleating and stitching 1.2 Kilt care 1.3 Altering a kilt 1.3.1 Kilt too small or too large 1.3.2 Kilt too long or too short 2 Irish kilt 3 Welsh kilt 4 Styles of kilt wear 5 See also 6 External links 7 References

[edit] The Scottish kilt

The Scottish kilt displays peculiarities of design, construction, and convention which differentiate it from other garments fitting the general description. It is a tailored garment that is wrapped around the wearer's body at the waist starting from one side, around the front and back, and across the front again to the opposite side. The fastenings consist of straps and buckles on both ends, the strap on the inside end passing through a slit in the waistband to be buckled on the outside.

The kilt covers the body from the waist down to just above the knees. The overlapping layers in front are called "aprons" and are flat; the single layer of fabric around the sides and back are pleated. Traditionally no underwear is worn beneath it.

[edit] Design and construction

[edit] Fabrics

The typical kilt as seen at modern Highland games events is made of twill woven worsted wool. The twill weave used for kilts is a 2-2 type, meaning that each weft thread passes over and under two warp threads at a time. The result is a distinctive diagonal weave pattern in the fabric which is referred to as the twill line. This kind of twill when woven according to a given color pattern, or sett (see below), is called tartan. In contrast, the Irish kilt traditionally was made from solid color cloth, with saffron or green being the most widely used colours.[2]

Kilting fabric weights are given in ounces per yard. The run from the very heavy regimental worsted of approximately 18–21 oz. down to a light worsted of about 10–11 oz. The most common weights for kilts are 13 oz. and 16 oz. The heavier weights are more appropriate for cooler weather, while the lighter weights would tend to be selected for warmer weather or for active use, such as Highland dancing. Not all patterns are available in all weights.

A kilt for a typical adult uses about 6–8 yards of single-width (about 26–30 inches) or about 3–4 yards of double-width (about 54–60 inches) tartan fabric. Double width fabric is woven so that the pattern exactly matches on the selvage. Kilts are usually made without a hem, since it would make the garment too bulky and cause it to hang incorrectly. The exact amount of fabric needed depends upon several factors, including the size of the sett, the number of pleats put into the garment, and the size of the person.

[edit] Setts (tartan patterns)

One of the most distinctive features of the authentic Scottish kilt is the tartan pattern, or sett, they exhibit. Many of these patterns have come to be associated with Scottish clans or families, but there are also tartans for districts, counties, countries, corporations, States and Provinces, schools and universities, individuals, commemorative, and simple generic patterns that anybody can wear. See History of the kilt for the process by which these associations came about.

Setts are always arranged horizontally and vertically, never on the diagonal. They are specified by their thread count, which is the sequence of colors and their units of width. As an example, the Wallace tartan has a thread count given as "K/4 R32 K32 Y/4" (K is black, R is red, and Y is yellow). This means that 4 units of black thread will be succeeded by 32 units of red, etc., in both the warp and the weft. Typically, the units are the actual number of threads, but as long as the proportions are maintained, the resulting pattern will be the same. This thread count also includes a pivot point indicated by the slash between the color and thread number. The weaver is suppose to reverse the weaving sequence at the pivot point to create a mirror image of the pattern. This is called a symmetrical tartan. Some tartans, like Buchanan, are asymmetrical which means they do not have a pivot point. The weaver weaves the sequence all the way through and then starts at the beginning again for the next sett.

Setts are further characterized by their size which is the number of inches (or centimeters) in one full repeat. The size of a given sett depends not only on the number of threads in the repeat, but also on the weight of the fabric. This is so because the heavier is the fabric weight, the thicker the threads will be and thus the same number of threads of a heavier weight fabric will occupy more space when woven.

The colors given in the thread count are specified as in heraldry, although tartan patterns are not heraldic. The exact shade which is used is a matter of artistic freedom and will vary from one [[fabric mill to another as well as from one dye lot to another within the same mill. Tartans are commercially woven in four standard color variations that describe the overall tone. "Ancient" or "Old" colors are characterized by a slightly faded look intended to resemble the vegetable dyes that were once used. Ancient greens and blues are lighter in shade, while reds appear orange. "Modern" colors are bright and show off modern alkaline dyeing methods. The colors are bright red, dark hunter green, and usually navy blue. "Weathered" or "Reproduction" colors were introduced by D.C. Dalgliesh, and simulate the look of older cloth weathered by the elements. Greens turn to light brown, blues become gray, and reds are a deeper wine color. The last color variation is "Muted" which tends to earth tones. The greens are olive, blues are slate blue, and red are an even deeper wine color. This means that of the nearly 5,000 registered tartans available there are four possible color variations for each, resulting in nearly 20,000 tartans.

Setts are registered with the Scottish Tartans Authority which maintains a collection of fabric samples characterized by name and thread count. In all, there are approximately 5000 registered tartans. Although many tartans being added every year, most of the registered patterns available today were created in the 19th century by commercial weavers who had a large variety of colors to work with. The rise of Highland romanticism and the growing Anglicization of Scottish culture by the Victorians at the time led to registering tartans with clan names. Before then, most of these patterns had little or no connection to any clan. There is therefore nothing symbolic about the colors, and nothing about the patterns is a reflection on the status of the wearer.

[edit] Measurements

Although cheaper kilts can be gotten in standard sizes, a quality kilt is tailored to the individual proportions of the wearer. At least three measurements, the waist, hips, and length of the kilt, are usually required. Sometimes the fell, the distance from waistline to the widest part of the hips, is also required.

If the kilt is being ordered from a distance, kiltmakers will supply instructions and a diagram explaining how the measurements should be taken for the kilt to fit properly. Most will also recommend that another person do the actual measurement, especially for the length. Prospective kilt purchasers should follow the measurement instructions as detailed by the kiltmaker of their choice.

[edit] Pleating and stitching

A kilt can be pleated with either box or knife pleats. A knife pleat is a simple fold, while the box pleat is bulkier, consisting of two knife pleats back-to-back. Knife pleats are the most common in modern civilian kilts. Regimental traditions vary. The Argyll and Sutherland Highlanders use box pleats, while the Black Watch arrange their kilts, made from the same tartan, with knife pleats. These traditions were also passed on to affiliated regiments in the Commonwealth, and were retained in successor battalions to these regiments in the amalgamated Royal Regiment of Scotland.

Pleats can be arranged relative to the pattern in two ways. In pleating to the stripe, a vertical stripe is selected and the fabric will be folded so that this stripe runs down the center of each pleat. The result is that horizontal bands appear along the back and sides of the kilt, which will look different from the front than it does from the back. It is often called military pleating because this is the style adopted by most military regiments. It is also widely used by pipe bands.

In pleating to the sett the fabric is folded in such a way that the pattern of the sett is repeated all around the kilt. This is done by taking up one full sett in each pleat, or two full setts if they are too small. This causes the kilt to look much the same both front and back.

Any pleat is characterized by depth and width. The portion of the pleat that protrudes from underneath the overlying pleat is the size or width. The pleat width is selected based on a the kilt and the amount of fabric to be used in constructing it, and will generally vary from about 1/2" to about 3/4".

The depth is the part of the pleat which is folded under the overlying pleat. It depends solely on the size of the tartan sett even when pleating to the stripe, since the sett determines the stripes' spacing.

The number of pleats used in making the kilt depends upon how much material is to be used in constructing the garment together with the size of the sett.

The pleats across the fell are tapered slightly since the wearer's waist will usually be narrower than the hips, and are usually stitched down either by machine or by hand.

In Highland dancing, it is easy to see the effect of the stitching on the action of the kilt. The kilt hugs the dancer's body from the waist down to the hipline and, from there, in response to the dancer's movements, it breaks sharply out. The way the kilt moves in response to the dance steps is an important part of the dance. If the pleats were not stitched down in this portion of the kilt, the action, or movement, would be quite different.

[edit] Kilt care

As the kilt is made of wool, it should not simply be cleaned in a washing machine along with other laundry. Instead, there are two main methods by which a kilt can be laundered: dry cleaning and hand laundering in cold or lukewarm water.

Expert recommendations differ on the best of these two methods. Tewksbury and Stuehmeyer, in The Art of Kiltmaking, advise strongly against having the garment dry cleaned, stating that "dry cleaning leaves a subtle residue on the kilt" and that, as a result, it "will soil more easily after it has been dry-cleaned".

On the other hand, Matthew Newsome, the Curator of the Scottish Tartans Museum in North Carolina (USA), states that "it is best to dry clean" the kilt, feeling that the kilt does not come into direct contact with the skin for very long and thus will not readily soil.

In between wearings, the kilt should first be aired out and then hung in a closet. One way to hang the kilt is to use a skirt hanger with large clasps. The kilt is first folded twice in half along the waist line. Then the skirt hanger is used to clasp the top of the kilt before it is hung in the closet. If moths are a problem, it can be hung with a cedar cache or strips of cedar wood.

Occasionally, the pleats may need to be re-pressed and this requires care. The authors of The Art of Kiltmaking advise that the pleats should be basted down before pressing so as to keep the pleats as straight as possible from the bottom of the fell to the bottom of the kilt, thus preserving the look of the sett when the kilt is worn.

It is also advisable to remove the leather straps on a kilt as dry cleaning chemicals can be very hard on leather and can cause it to discolor and degrade over time.

[edit] Altering a kilt

A properly made kilt, when buckled on the tightest holes of the straps, should not be so loose that the wearer can easily twist the kilt around the body. Nor should it be so tight when buckled on the loosest holes of the straps that it causes "scalloping" of the fabric where it is buckled.

Additionally, the length of the kilt, when it is buckled at the waist, should be such that the kilt extends to the top of the kneecap. If it does not, it is either too long or too short.

[edit] Kilt too small or too large

Commonly, the kilt will be made with four holes in the straps and it is made to fit on the second (tightest) hole. This allows at least some room for weight loss or weight gain.

If the holes on the straps are insufficient to accommodate weight changes, then one could move the straps and buckles, both buckles at the over-apron waist and hip and the under-apron strap.

Kilts are often also made with extra material in the kick pleats or apron edges to accommodate alteration of the garment, although it is not advisable to reconstruct a kilt too much as it was made to a certain size originally. Some kiltmakers will take a kilt completely apart and alter it, this is advisable as the work required would cost a quater the price of a new kilt.

[edit] Kilt too long or too short

As mentioned above in the section on measurements, the kilt is normally tailored so that the bottom edge of the kilt falls at the middle of the kneecap. At Highland Games gatherings, it is not uncommon to see kilts being worn whose bottom edge falls somewhat below this level. Such a kilt may need to be shortened. However, before embarking on what could be an expensive alteration, it is well to determine whether this alteration is actually needed or not. For one common enough problem here is that the wearer is wearing the kilt on the hips, and not at the waist as intended. So first make sure that the kilt is being worn properly and only then can one determine whether or not an alteration in length is required.

If the kilt is made on the selvage, as is normally the case for an adult, it can be shortened by hemming it, although this works best with the lighter weight fabrics as otherwise there may be a visible hem. The other common way to shorten the kilt is to take material off the waistline. This requires removing the stitches from the rise (that portion, about a couple of inches in length, which lies above the true waist) and maybe also a portion of the fell, removing the excess material, and re-stitching.

One problem with this method is that you are altering the size of the kilt and you need to re-stitch all of the pleats by an inch or two. There is a simpler and more effective method of shortening the kilt without affecting its original fit by creating a new selvage. This can be done by using a sewing machine to sew a tight zig zig stitch at the point where you wish to crop the kilt, then treating the stitch with an anti-fraying glue. Once it has dried, you cut off the material below the stitch. You will need to clean up a few loose threads, but this does create a new selvage edge that is quite strong.

Normally, a kilt is made without a hem, instead being made on the selvage. One common exception to this rule is a kilt for a young and growing child (many Highland dancers fall into this category). Here the kilt is often hemmed so that as the child grows, the hem can be let out to accommodate the growth by lengthening the garment.

[edit] Irish kilt

Starting with Dalriada, the Scots and the Irish have been closely entwined peoples. Both peoples are Gaels, speaking Gaelic languages (Scottish Gaelic and Irish, respectively).

Though the origins of the kilt are disputed, it can be said with some good deal of assurance that it originated in the Scottish Highlands and Isles. It could have been developed by Scots, Irish, Norse Gaels, or possibly all together.

In contrast to the Scottish kilt, the Irish Lein-croich traditionally was made from solid colour cloth, with saffron and green being the most widely used colours. Solid colored Irish kilts can often be seen in 19th and early 20th century photos in Ireland especially at political and musical gatherings. The kilt was used as a symbol of Gaelic nationalism in Ireland during this period. Tweed kilts were also not uncommon in both Scotland and Ireland and have been popular with sportsmen, fishermen, and hunters.

Many "Irish County" tartans were designed by Polly Wittering, first produced in 1996 by the House of Edgar, of Perth in Scotland. Marton Mills in West Yorkshire came up with an "Irish County Crest Collection" of county tartans. There are also a number of "Irish District" tartans most of which are recent designs by Lochcarron of Scotland. The Ulster tartan is one of the oldest registered Irish tartans. It was found by a farmer, W.G. Dixon, in County Londonderry in 1956 as he uncovered pieces of clothing made from the design. The Belfast Museum and Art Gallery dated the material from between the 1590s to 1650s. Its exact origins are unknown, but it is likely that came from a Scottish pioneer during the beginning of the Ulster plantation period when the Scots first came in great numbers to Ulster. [3] There are other generic Irish tartans including the Irish National, St. Patrick's, Tara, and Clodagh. Some Irish family tartans have been appearing over the years, although these are few at the moment more are being created. O'Brien, Sullivan, Murphy, Fitzpatrick, and Forde are fairly common examples of Irish family tartans.

In present day Ireland the kilt is still seen very much as being primarily Scottish, and the current crop of county and district tartans are largely unknown in Ireland and indeed difficult to obtain, having been designed and marketed primarily with the Irish-American market in mind. As they have neither been designed or manufactured in Ireland itself it is questionable as to whether they can be strictly described as Irish. Irish Tartans? In the book District Tartans by Gordon Teall of Teallach and Philip D Smith Jr (ISBN 0 85683 085 2) only three tartans are identified as being distinctly Irish, these are Ulster,[4] Tara,[5] and Clodagh.[6] As noted above the Ulster tartan originates from around 1590–1650 and is probably Scottish in origin. Ulster Tartan The Tara was first noted around 1880 and was originally called Murphy. The Clodagh has an earliest date of 1971 with uncertainty as to its original designer or first appearance.

On a day-to-day basis kilt wearing is rarely if ever encountered. Within the world of Irish dancing the boy's kilt has been largely abandoned, especially since the worldwide popularity of Riverdance and the revival and interest in Irish dancing generally. Irish Dancers

There are two exceptions to these trends in Ireland.

A vibrant piping scene in Ireland means that there are many kilted bands throughout the whole of Ireland particularly in the north of the island. The vast majority of these bands wear tartan kilts, the solid colour saffron kilt being almost exclusively the preserve of the pipe bands of the Republic's Defence Forces and the British Army's Irish regiments.

The appearance of the kilt at Irish weddings is becoming increasingly common either for the groom or more usually for the male guests. It has now become a feature of almost every wedding in Ireland that the bride and groom are piped in when arriving at their reception.[7]

Reasons for the increased wearing of kilts at Irish weddings are probably twofold: It is an alternative to the more usual suit and is once again being seen as an outward sign of celtic origins.The kilt a "pan-celtic" garment?

[edit] Welsh kilt

A Welsh Kilt (properly a 'Cilt') is a type of kilt worn in Wales and by Welshmen. Although not considered a traditional component of Welsh national dress, the kilt has become very popular in the Celtic nations these days. Kilts and tartans can be seen in Cornwall, the Isle of Man, Brittany in France, and Galicia in Spain, as well as England, particularly the north east. Nowadays with Welsh nationalism on the rise and a resurgence of Welsh national pride, kilts (or cilts in Welsh) are being worn more and more by Welshmen. In recent times a range of Welsh tartans and modern national costumes have been produced at the Cambrian Woolen Mill, Llanwrtyd Wells, Powys, which are made into shawls for ladies and cilts for men, amongst other things.

The St David's Tartan or brithwe Dewi Sant is one of the most popular tartans in Wales, but individual family tartans are being produced, despite there being little evidence that the Welsh (or any other Celtic nation for that matter) traditionally used tartan to identify families. Williams, Jones, Thomas, Evans, and Davies are among the most popular tartans and common names in Wales. The Welsh National tartan was designed by D.M. Richards in 1967 to demonstrate Wales' connection with the greater Celtic world. Its colors (green, red, and white) are the colors of the Welsh national flag.

Although they are generally seen these days in formal settings like weddings, there has been an increase in the number of people wearing their kilt to a rugby or football match, paired with a jersey rather than a formal jacket. According to some Welsh tartan centre officials, the Pride of Wales kilt is the most popular kilt alongside the St Davids National Tartan.

[edit] Styles of kilt wear

Today most Scotsmen see the kilt as formal dress or ceremonial dress. For Scotsmen, the kilt is usually worn with a Prince Charles or an Argyll jacket. Irishmen on the other hand commonly wear the Brian Boru or the Kilkenny jacket with the kilt. They are often worn at weddings or other formal occasions, while there are still a few people who wear them daily. The kilt is also used for parades by groups such as the Scouts, and in many places the kilt is seen in force at Highland games and pipe band championships as well as being worn at Scottish country dances and ceilidhs.

Certain regiments/units of the British Army and armies of other Commonwealth nations (including Australia, Canada, New Zealand and South Africa) still continue to wear the kilt as part of dress or duty uniform, though they have not been used in combat since 1944. Uniforms in which the kilt is worn include Ceremonial Dress, Service Dress, and Barracks Dress. The kilt is considered appropriate for ceremonial parades, office duties, less formal parades, walking out, mess dinners, and classroom instruction/band practice.

The kilt has become normal wear for formal occasions, for example being hired for weddings in much the same way as top hat and tails are in England or dinner jackets in America, and the kilt is being worn by anyone regardless of nationality or descent. Although a white tie style exists, the more common style of formal Highland regalia is seen in Black tie.

The kilt has also become increasingly common around the world for casual wear, for example with the Jacobite shirt. It's not uncommon at all to see kilts making an appearance at Irish pubs, and it is becoming somewhat less rare to see them in the workplace.^[4] Casual use of the kilt dressed down with lace-up boots or moccasins, and with tee shirts or golf shirts, is becoming increasingly more familiar at Highland Games. The small ornamental Sgian Dubh dagger is often omitted where security concerns are paramount (for example, they are not allowed on commercial aircraft). For the same reasons, the traditional Sgian Dubh is frequently substituted by a plastic alternative, as its use is now purely ornamental (with only the hilt showing over the top of the hose).

[edit] See also

• Kilt accessories
• Kilt variants
• History of the kilt

[edit] External links

• A Guide to Choosing a Kilt
• Tartan Fabric - A Quick Guide
• Kilt Community
• Kilts & Tartan Made Easy - free impartial e-book
• How to Sew a Kilt
• The Scottish Tartans Authority
• The Early History of the Kilt
• Kilt Day - A site dedicated to everyday kilt wear by men
• Reconstructing History
• Acts Against the Highland Dress
• Kilted Life -Kilt wearing links, history and community
• The Irish Kilt Club
• The Brotherhood of the Kilt - a global organization dedicated to promoting the kilt and educating people on the history of the kilt and cultures that wear it
• Kiltphotos.com - user-submitted photos of kilts

[edit] References

1. ^ To cite one example, Buckhead School Uniforms [1], a supplier of school uniforms mainly for the private school market in the United States, offers what they call a "kilt" as part of their line of girl's uniforms. There are many, especially in the Scottish community, who do not consider the use of the term "kilt" as applied to such garments, to be entirely appropriate, believing instead that the more correct term in such cases would be kilt-skirt or kilt-styled skirt.
2. ^ Rules of the British Columbia Pipers Association - in which "acceptable highland dress" for solo pipers and pipe bands is specified
3. ^ Costuming regulations of the Scottish Official Board of Highland Dancing
4. ^ Andrew Bolton, Bravehearts: Men in Skirts (Victoria & Albert Museum, London, 2003 ISBN 0-8109-6558-5)

• Barbara Tewksbury and Elie Stuehmeyer, The Art of Kiltmaking (Celtic Dragon Press, Rome, NY, 2001 ISBN 0-9703751-0-7)
• J. Charles Thompson, So You're Going to Wear the Kilt (Heraldic Art Press, Arlington, VA, 1979 ISBN 0-86228-017-6)
• Gordon Teall of Teallach and Philip D Smith Jr, District Tartans (Shepheard-Walwyn London, UK 1992 ISBN 0 85683 085 2)