Intel 80486DX4

From Wikipedia, the free encyclopedia

Intel i486 DX4 100MHz

voltage converter for 80486 dx4 processors (5V to 3,3V)

The Intel DX4 is a clock-tripled 80486 microprocessor chip. Intel named their chip deceptively during litigation with AMD over trademarks. The product was officially named the DX4, but OEMs continued using the 486DX4 naming convention.

Intel produced DX4s with two clock speed steppings: A 75 MHz version (3x 25 MHz multiplier) and a 100 MHz version (usually 3x 33.3 MHz, but sometimes 2.5x 40 MHz or 2x 50 MHz). OverDrive editions of the DX4 had locked multipliers, and therefore can run only at 3x the external clock-speed.

The 100 MHz model of the processor had an iCOMP rating of 435, whilst the 75 MHz processor had a rating of 319. The 486s' improvements over the 386 mean that the entire 486 range has nearly double performance with the same clock rate.

[edit] References

This article does not adequately cite its references or sources.
Please help improve this article by adding citations to reliable sources. (help, get involved!)
Any material not supported by sources may be challenged and removed at any time. This article has been tagged since November 2006.

Intel processors (italics indicate non-x86 processors) 4004 \| 4040 \| 8008 \| 8080 \| 8085 \| 8086 \| 8088 \| iAPX 432 \| 80186 \| 80188 \| 80286 \| 80386 \| 80486 \| i860 \| i960 \| Pentium \| Pentium Pro \| Pentium II \| Celeron \| Pentium III \| XScale \| Pentium 4 \| Pentium M \| Pentium D \| Pentium Extreme Edition \| Pentium Dual Core \| Pentium E \| Xeon \| Core \| Core 2 \| Itanium \| Itanium 2 List of Intel microprocessors \| List of Intel CPU slots and sockets