Insurgency weapon

From Wikipedia, the free encyclopedia

You have new messages (last change).
Some information in this article or section is not attributed to sources and may not be reliable.
Please check for inaccuracies, and modify and cite sources as needed.

An insurgency weapon is a weapon, most often a firearm, that is intended to be smuggled or airdropped behind enemy lines, and used by insurgents to engage in guerrilla warfare against an occupier, or for use by rebels against an established government. While the term insurgency weapon is not generally used outside of the Hillberg designs mentioned below, there are a number of documented firearms that share many similar characteristics, and may be classified under the same label. Another common label is a sanitized weapon, which is a weapon of any sort that has had normal markings, such as the manufacturer's name and/or serial number, obscured in an attempt to hide the origin of the weapon.

Insurgency weapons differ from improvised weapons also commonly used by insurgents in that insurgency weapons are carefully designed and manufactured outside the area of rebellion or insurgency, while improvised munitions are manufactured on the spot.

Contents

[edit] Characteristics

A fairly recent class of firearms, purpose-designed insurgency weapons first appeared during World War II, in the form of such arms as the FP-45 Liberator and the Sten submachine gun. Designed to be inexpensive, most insurgency weapons are of simple design, typically made of sheet steel stampings, which are then folded into shape and welded. Tubular steel in standard sizes is also used when possible, and barrels (one of the few firearm parts that requires close tolerances and high strength) may be rifled or left smoothbore. The CIA Deer Gun of the 1960s was similar to the Liberator, but used an aluminum casting for the body of the pistol, and was chambered in 9×19 mm Parabellum, one of the all-time most common handgun cartridges in the world. There is no known explanation for the name "Deer Gun", but the Deer Gun was intended to be smuggled into Vietnam, attested by the instruction sheet printed in Vietnamese. The manufacturer is not known. Details of the manufacture of insurgency weapons are almost always deliberately obscured by the governments making them.

Other insurgency weapons are traditional infantry or defensive weapons that have been sanitized, carrying no markings that indicate the point of origin. These may be purpose-made without markings, or they may be standard commercial or military arms that have been altered to remove the manufacturers markings.

Due to the nature of insurgency weapons, documenting their history is often difficult if not impossible. Those that can legally be traded on the civilian market, like the Liberator pistol, will often command high prices; although millions of the pistols were made, few survived the war.

[edit] Examples

These examples are all arms that were either used as insurgency weapons, or designed for such use. Purpose-built weapons were designed from the start to be used primarily for insurgent use, and are fairly crude, very inexpensive, and simple to operate; many were packaged with instructions targeted to speakers of certain languages, or pictorial instructions usable by illiterate users or speakers of any language. Dual-use weapons are those that were designed with special allowances for use by insurgent troops. Sanitized weapons are any arms that have been manufactured or altered to remove markings that indicate point of origin.

[edit] Purpose-built insurgency weapons

More specifically, this invention relates to a four barrel break-open firearm which has a minimum number of working parts, is simple to operate even by inexperienced personnel, and is economical to manufacture.
—Second paragraph of U.S. Patent 3,260,009, by Robert Hillberg

The FP-45 Liberator was a single shot .45 ACP derringer-type pistol, made by the U.S. during World War II. It was made from stamped steel with an unrifled barrel. The designation "FP" stood for "flare projector", which was apparently an attempt to disguise the existence of the pistol by obscuring the nature of the project. It was packed with ten rounds of ammunition, and was intended to be used for assassinating enemy soldiers so that their weapons could then be captured and used by the insurgents. The instructions were pictorial, so that the gun could be distributed in any theatre of war, and used even by illiterate operators. Most were sent to the Philippines.

The CIA Deer gun was a single shot 9×19 mm Parabellum pistol, made by the U.S. during the Vietnam War. It was packaged with three rounds of ammunition in the grip, and packed with instructions in a plastic box. If air-dropped into water, the plastic box containing the pistol would float. Like the earlier Liberator, it was designed primarily for assassination, and meant to be replaced by an enemy soldier's equipment. The instructions for the Deer Gun were pictorial, with text in Vietnamese.

A unique example is the Soviet S4M pistol, designed to be used expressly for the purpose of assassination. It was a simple break-open, two-shot derringer, but the unique features came from its specialized ammunition, designed around a cut-down version of the 7.62mm rounds used in the Soviet AK-47. The casings of the round contained a piston-like plunger between the bullet and the powder that would move forward inside the casing when fired. The piston would push the round down the barrel and plug the end of the casing, completely sealing off any explosive gases in the casing. This, combined with the inherently low-velocity round resulted in a truly silent pistol. The nature of the gun and ammunition led to it being wildly inaccurate outside of point-blank range. To add further confusion and throw possible suspicion away from the assassin, the barrel rifling was designed to affect the bullet in such a way that ballistics experts would not only conclude that the round was fired from an AK-47, but that the round was fired from several hundred feet away. Due to the politically devastating nature inherent in this design, the S4M was kept highly secret. Information on the pistol was not known by western governments until well after the end of the Cold War.

Clip of Hillberg's patent for the 4 barrelled Liberator shotgun design.
Clip of Hillberg's patent for the 4 barrelled Liberator shotgun design.

The Winchester Liberator is a 16-gauge, four-barrelled shotgun, similar to a scaled up four-shot double action derringer. it was an implementation of the Hillberg Insurgency Weapon design. Robert Hillberg, the designer, envisioned a weapon that was cheap to manufacture, easy to use, and provided a significant chance of being effective in the hands of someone who had never handled a firearm before. Pistols and submachine guns were eliminated from consideration due to the training required to use them effectively. The shotgun was chosen because it provided a very high volume of fire with a high hit probability. Both Winchester and Colt built prototypes, although the Colt eight-shot design came late in the war and was adapted for the civilian law enforcement market. No known samples were ever produced for military use.

[edit] Dual-use weapons

The Welrod pistol was a simple, bolt action pistol developed by the SOE for use in World War II. It was designed as much for use by covert British forces as foreign insurgents. The pistol designed with an integral sound suppressor, and was ideal for disabling sentries and other covert work; the bolt-operated action meant that cocking the gun produced almost no noise, and the bulky but efficient suppressor eliminated nearly all of the muzzle blast. Welrod pistols included an eight-shot magazine that doubled as a hand-grip, and were originally produced with no markings save a serial number.

The Sten was a 9×19 mm Parabellum submachine gun manufactured by the United Kingdom in World War II. Intended for use by both British troops and partisan forces, the Sten was made in 9 mm calibre to allow the use of captured German ammunition by partisan troops who had no line of supply. It also proved popular with some British troops, and one was even carried by King George VI for self-defence during the war.

[edit] Sanitized arms

The Yugoslavian Mauser M-48BO (for bez oznake, 'without markings') rifle was manufactured (or remanufactured by refurbishing German World War II rifles) with no markings save for a serial number. These were made in Yugoslavia for delivery to Egypt prior to the Suez crisis of 1956. Yugoslavia was technically a neutral country, and by sanitizing the rifles sold to the Egyptians, it hoped to distance itself from the conflict between Egypt and Israel. Only a few hundred of the few thousand made were delivered to Egypt, the rest remaining in storage in Yugoslavia until recently rediscovered. They are currently being sold to civilian collectors.

A 2003 seizure of weapons in Iraq by US forces turned up at least one sanitized weapon, a pistol identical to a Sig-Sauer P-226 handgun, with no markings save a serial number.

[edit] See also

Zip gun

[edit] External links

Retrieved from "http://en.wikipedia.org../../../i/n/s/Insurgency_weapon.html"