High density polyethylene
From Wikipedia, the free encyclopedia
High-density polyethylene (HDPE) is a polyethylene thermoplastic made from petroleum. It takes 1.75 kilograms of petroleum (in terms of energy and raw materials) to make one kilogram of HDPE.
Contents |
[edit] Properties
HDPE has little branching, giving it stronger intermolecular forces and tensile strength than lower density polyethylene. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C for short periods, 110 °C continuously). The lack of branching is ensured by an appropriate choice of catalyst (e.g. Ziegler-Natta catalysts) and reaction conditions.
[edit] Applications
HDPE is resistant to many different solvents and has a wide variety of applications, including:
- Containers
- Tupperware
- Laundry detergent bottles
- Milk cartons
- Fuel tanks for vehicles
- Plastic bags
- Containment of certain chemicals
- Chemical-resistant piping systems
- Geothermal heat transfer piping systems
- Natural gas distribution pipe systems
- Water pipes, for domestic water supply.
- Coax cable inner insulators (dielectric insulating spacer)
- Root Barrier
- Corrosion Protection for Steel Pipelines. See HDPE Liner
HDPE is also used for cell liners in subtitle D sanitary landfills, wherein large sheets of HDPE are either extrusion or wedge welded to form a homogeneous chemical-resistant barrier, preventing the pollution of soil and groundwater by the liquid constituents of solid waste.
One of the largest uses for HDPE is wood plastic composites, with recycled polymers leading the way.
[edit] See also
- Linear low density polyethylene
- Low density polyethylene
- Resin identification code
- Ultra high molecular weight polyethylene