Heat capacity ratio

From Wikipedia, the free encyclopedia

You have new messages (last change).
Heat Capacity Ratio for various gases[1][2]
Temp. Gas γ   Temp. Gas γ   Temp. Gas γ
–181°C H2 1.597 200°C Dry Air 1.398 20°C NO 1.40
–76°C 1.453 400°C 1.393 20°C N2O 1.31
20°C 1.41 1000°C 1.365 –181°C N2 1.47
100°C 1.404 2000°C 1.088 15°C 1.404
400°C 1.387 0°C CO2 1.310 20°C Cl2 1.34
1000°C 1.358 20°C 1.30 –115°C CH4 1.41
2000°C 1.318 100°C 1.281 –74°C 1.35
20°C He 1.66 400°C 1.235 20°C 1.32
20°C H2O 1.33 1000°C 1.195 15°C NH3 1.310
100°C 1.324 20°C CO 1.40 19°C Ne 1.64
200°C 1.310 –181°C O2 1.45 19°C Xe 1.66
–180°C Ar 1.76 –76°C 1.415 19°C Kr 1.68
20°C 1.67 20°C 1.40 15°C SO2 1.29
0°C Dry Air 1.403 100°C 1.399 360°C Hg 1.67
20°C 1.40 200°C 1.397 15°C C2H6 1.22
100°C 1.401 400°C 1.394 16°C C3H8 1.13


The heat capacity ratio or adiabatic index, is the ratio of the heat capacity at constant pressure (CP) to heat capacity at constant volume (CV). It is sometimes also known as the isentropic expansion factor and ratio of specific heats, and is denoted by γ (gamma) or κ (kappa). The latter symbol kappa is primarily used by chemical engineers.

\gamma = \frac{C_P}{C_V}

where, C is the heat capacity or the specific heat capacity of a gas, suffix P and V refer to constant pressure and constant volume conditions respectively.

To understand this relation, consider the following experiment:

A closed cylinder with a locked piston contains air. The pressure inside is equal to the outside air pressure. This cylinder is heated. Since the piston cannot move the volume is constant. Temperature and pressure rise. Heating is stopped and the energy added to the system, which is proportional to CV, is noted. The piston is now freed and moves outwards, expanding without exchange of heat (adiabatic expansion). Doing this work (proportional to CP) cools the air to below its starting temperature. To return to the starting temperature (still with a free piston) the air must be heated. This extra heat amounts to about 40% of the previous amount added.

In the preceding, it may not be obvious how CP is involved because during the expansion and subsequent heating, the pressure does not remain constant. Another way of understanding the difference between CP and CV is to consider the difference between adding heat to the gas with a locked piston, and adding heat with a piston free to move, so that pressure remains constant. In that case, the gas will both heat and expand, causing the piston to do mechanical work on the atmosphere. The heat that is added to the gas goes only partly into heating the gas; while the rest is transformed into the mechanical work performed by the piston. In the constant-volume case (locked piston) there is no external motion, and thus no mechanical work is done on the atmosphere. Thus the amount of heat required to raise the gas temperature (the heat capacity) is higher in the constant pressure case.

Contents

[edit] Ideal gas relations

For an ideal gas, the heat capacity is constant with temperature. Accordingly we can express the enthalpy as H = CPT and the internal energy as U = CVT. Thus, it can also be said that the heat capacity ratio is the ratio between the enthalpy to the internal energy:

\gamma = \frac{H}{U}

Furthermore, the heat capacities can be expressed in terms of heat capacity ratio ( γ ) and the gas constant ( R ):

C_P = \frac{\gamma R}{\gamma - 1} \qquad \mbox{and} \qquad C_V = \frac{R}{\gamma - 1}

It can be rather difficult to find tabulated information for CV, since CP is more commonly tabulated. The following relation, can be used to determine CV:

CV = CP − R

[edit] Relation with degrees of freedom

The heat capacity ratio ( γ ) for an ideal gas can be related to the degrees of freedom ( f ) of a molecule by:

\gamma = \frac{f+2}{f}

Thus we observe that for a monatomic gas, with three degrees of freedom:

\gamma\ = \frac{5}{3} = 1.67,

while for a diatomic gas, with five degrees of freedom (at room temperature):

\gamma = \frac{7}{5} = 1.4.

E.g.: The terrestrial air is primarily made up of diatomic gasses (~78% nitrogen (N2) and ~21% oxygen (O2)) and, at standard conditions it can be considered to be an ideal gas. A diatomic molecule has five degrees of freedom (three translational and two rotational degrees of freedom, the vibrational degree of freedom is not involved except at high temperatures). This results in a value of

\gamma = \frac{5 + 2}{5} = \frac{7}{5} = 1.4.

This is consistent with the measured adiabatic index of approximately 1.403 (listed above in the table).

[edit] Real gas relations

For a real gas, CP and CV usually increase with increasing temperature and γ decreases. Some correlations exist to provide values of γ as a function of the temperature.

[edit] Adiabatic process

This ratio also gives the important relation for a quasistatic, adiabatic process:

p_1{V_1}^\gamma = p_2{V_2}^\gamma = \emph{constant}

where, p is the pressure, V is the volume, suffix 1 and 2 refer to conditions before and after the process.

[edit] See also

[edit] References

  1. ^ White, Frank M.: Fluid Mechanics 4th ed. McGraw Hill
  2. ^ Lange's Handbook of Chemistry, 10th ed. page 1524
Retrieved from "http://en.wikipedia.org../../../h/e/a/Heat_capacity_ratio.html"