Gnomonic projection

From Wikipedia, the free encyclopedia

This article (or section) may need to be wikified to meet Wikipedia's quality standards.
Please help improve this article, especially its section layout, and relevant internal links. (help)
This article has been tagged since December 2006.
Examples of gnomonic projections.
Examples of gnomonic projections.

The gnomonic map projection displays all great circles as straight lines.

Thus the shortest route between two locations in reality corresponds to that on the map. This is achieved by projecting, with respect to the center of the Earth (hence perpendicular to the surface), the Earth's surface onto a tangent plane. The least distortion occurs at the tangent point. Less than half of the sphere can be projected onto a finite map.

Since meridians and the Equator are great circles, they are always shown as straight lines.

  • If the tangent point is one of the Poles then the meridians are radial and equally spaced. The equator is at infinity in all directions. Other parallels are depicted as concentric circles.
  • If the tangent point is on the equator then the meridians are parallel but not equally spaced. The equator is a straight line perpendicular to the meridians. Other parallels are depicted as hyperbolae.
  • In other cases the meridians are radially outward straight lines from a Pole, but not equally spaced. The equator is a straight line that is perpendicular to only one meridian (which again demonstrates that the projection is not conformal).

As for all azimuthal projections, angles from the tangent point are preserved. The map distance from that point is a function r(d) of the true distance d, given by

\ r(d) = c \ tan (d / r)

where R is the radius of the Earth. The radial scale is

\ r'(d) = \frac{c}{2R \ cos^2(d/2R)}

and the transverse scale

\frac{c}{2R \ cos(d/2R)}

so the transverse scale increases outwardly, and the radial scale even more.

The gnomonic projection is said to be the oldest map projection, developed by Thales in the 6th century BC.

Gnomonic projections are used in seismic work because seismic waves tend to travel along great circles. They are also used by navies in plotting direction finding bearings, since radio signals travel along great circles.


[edit] External links


[edit] References

Snyder, John P. (1987). Map Projections - A Working Manual. U.S. Geological Survey Professional Paper 1395. United States Government Printing Office, Washington, D.C..  This paper can be downloaded from USGS pages

Retrieved from "http://en.wikipedia.org../../../g/n/o/Gnomonic_projection.html"