GM High Feature engine
From Wikipedia, the free encyclopedia
| High Feature V6 | |
|---|---|
| Manufacturer | General Motors |
| Also called | Alloytec V6 |
| Production | 2004– |
| Predecessor | 54° V6 |
| Class | DOHC 60° 24-valve V6 |
| Engine | 2.8 L (2792 cc/171 in³) 3.2 L (3195 cc/195 in³) 3.6 L (3564 cc/217 in³) |
| Similar | Chrysler SOHC Chrysler Phoenix Ford Cyclone Honda J-series Nissan VQ Toyota GR |
The 3600 LY7 (and derivative LP1) are members of General Motors' new High Feature (or HFV6) engine family of modern DOHC V6s. This new family of engines was introduced in 2004 with the Cadillac CTS. Holden sells the HFV6 under the name, Alloytec. The block was designed to be expandable from 2.8 L to 4.0 L.
It is a 60° 24-valve design with aluminum block and heads and Sequential Electronic Fuel Injection. Most versions feature continuously-variable cam phasing on both intake and exhaust valves and electronic throttle control. Other features include piston oil-jet capability, forged crankshaft and connecting rods, variable intake, and electronic throttle control. It was developed by the same international team responsible for the Ecotec, including the Opel engineers responsible for the 54° V6, with involvement with design and development engineering from Ricardo PLC of England.
High Feature V6 engines are produced at Fisherman's Bend in Port Melbourne, Australia, St. Catharines in Canada, and Flint Engine South in Flint, Michigan.
Contents |
[edit] Alfa Romeo
Alfa Romeo uses the High Feature engine design, though with many modifications, as the JTS V6. The Alfa unit features lean-burn technology as on many other engines from the company. It displaces 3.2 L (3195 cc) and has an output of 191 kW (260 hp) at 6200 rpm and 322 N·m (237 ft·lbf) torque, with gasoline direct injection allowing a high compression ratio of 11.25:1. Engine is equipped also with cam-phasing on both inlet and exhaust side, thus the name "TwinPhaser".
Applications:
- 2005 Alfa Romeo 159
- 2006 Alfa Romeo 159 Sportwagon
- 2005 Alfa Romeo Brera
- 2006 Alfa Romeo Spider
[edit] Holden 3.2
Holden has built its own 3.2 L version of the High Feature engine in Australia. Branded with the Alloytec name like the 3.6 L version, this version produces 227 hp (169 kW) at 6600 rpm and 219 ft·lbf (297 N·m) at 3200 rpm.
Applications:
- 2007 Holden Captiva
- 2007 Opel Antara
[edit] LY7
The 3.6 L (3564 cc) LY7 version was introduced in the 2004 Cadillac CTS sedan. It has a 10.2:1 compression ratio and produces 255 hp (190 kW) at 6200 rpm and 252 ft·lbf (342 N·m) at 3100 rpm. The bore is 3.70 in (94.0 mm) and the stroke is 3.37 in (85.6 mm). In some applications, including the Buick LaCrosse and Holden Commodore, the LY7 has an output of 235 to 262 hp (175 to 195 kW) and 225 to 251 ft·lbf (305 to 340 N·m) equipped with either cam-phasing on the inlet side only or both inlet and exhaust. Selected models also do not include variable intake. The engine weighs 370 lb as installed.
On the Lambda crossover SUVs (Saturn Outlook, GMC Acadia, and Buick Enclave) it is expected to produce 275 hp (205 kW) and 251 ft·lbf (340 N·m). The Holden Alloytec version has been modified to meet Euro III emissions standards. A 235 hp (175 kW) version able to run on autogas (LPG) has also been produced.
Applications:
- 2004 Cadillac CTS
- 2004 Buick Rendezvous CXL/Ultra
- 2004 Cadillac SRX
- 2004 Holden VZ Commodore
- 2005 Buick LaCrosse CXS
- 2005 Cadillac STS
- 2006 Holden VE Commodore
- 2006 Holden WM Statesman
- 2006 Holden WM Caprice
- 2007 Saturn Aura
- 2007 Saturn Outlook
- 2007 Pontiac G6 GTP
- 2007 GMC Acadia
Future applications:
- 2008 Buick Enclave
- 2008 Chevrolet Malibu
- 2008 Pontiac G8
In May 2006, GM unveiled a new version of this engine that featured a direct injection system, which GM claims will have 15% greater power, 8% greater torque, and 3% better fuel economy than the current port-injected version, allowing it to produce approximately 300 horsepower and 270 ft·lbf of torque. This motor will debut on the 2008 Cadillac CTS [1].
Applications:
- 2008 Cadillac CTS
- 2008 Cadillac STS
[edit] LP1
A 2.8 L (2792 cc) LP1 variant was introduced in the 2005 Cadillac CTS. It has a 3.50 in (89.0 mm) bore, a 2.94 in (74.8 mm) stroke, and a 10.0:1 compression ratio. It generates 210 hp (156 kW) at 6500 rpm, and 194 ft·lbf (263 N·m) at 3300 rpm.
Applications:
- 2005–2007 Cadillac CTS
[edit] Suzuki
Suzuki builds the High Feature V6 at its Sagara, Japan plant for the Suzuki XL-7 SUV under license from General Motors. Displacing 3.6 L, this engine produces 252 hp (185 kW) at 6500 rpm and 243 ft·lbf (329 N·m) at 2300 rpm.
Applications:
- 2007 Suzuki XL-7
[edit] Turbo
A 2.8 L turbocharged version is used for the Saab 9-3 and other GM vehicles. It produces 250 hp DIN (184 kW) at 5500 rpm and 258 ft·lbf (350 N·m) at 2000 rpm. It has the same bore and stroke as the naturally-aspirated LP1, however the compression ratio is reduced to 9.5:1. There is also another variant available, with 230 hp DIN (169 kW). This engine is partly developed by Saab Automobile, and built in Australia.
Applications:
- 2007 Cadillac BLS
- 2006 Opel Vectra
- 2006 Opel Signum
- 2006 Saab 9-3
[edit] V12
On March 21, 2007 it was reported by AutoWeek that GM is planning to develop a 60-degree V12 based on this engine family to power the top version of Cadillac's upcoming flagship sedan. This engine would essentially consist of two 3.6 L High Feature V6s attached end-to-end on a single crankshaft, and would feature such high-end technologies as direct injection and cylinder deactivation. If so, the engine would displace 7.2 liters, and produce approximately 600 horsepower and 540 ft·lbf of torque. Development of the engine is reportedly being conducted in Australia by Holden. [2]
[edit] Other links
- Cadillac CTS Homepage
- Caddyinfo.com - Cadillac Discussion Forum, How-To, and Technical Information
- GM Unveils New Direct Injection V-6 - Ward's Auto World.
