Gland (engineering)

From Wikipedia, the free encyclopedia

A gland is a general type of stuffing box, used to seal a rotating or reciprocating shaft against a fluid. The most common example is in the head of a tap (faucet) where the gland is usually packed with string which has been soaked in tallow or similar grease. The gland nut allows the packing material to be compressed to form a watertight seal and prevent water leaking up the shaft when the tap is turned on. The gland at the rotating shaft of a centrifugal pump may be packed in a similar way and graphite grease used to accommodate continuous operation. The linear seal around the piston rod of a double acting steam piston is also known as a gland, particularly in marine applications. Likewise the shaft of a handpump or wind pump is sealed with a gland where the shaft exits the borehole.

Other types of sealed connections without movings part are also sometimes called glands; for example, the point where an electrical flex exits a conduit is often sealed by an adjustable gland to facilitate assembly and to prevent water ingress.


This article about a mechanical engineering topic is a stub. You can help Wikipedia by expanding it.