Geosynthetics

From Wikipedia, the free encyclopedia

You have new messages (last change).
Geosynthetics in use
Geosynthetics in use

Geosynthetics is the catch all term used to describe a range of generally synthetic products used to solve geotechnical problems. The term is generally regarded to encompass four main products: geotextiles, geonets/geogrids, geomembranes and geocomposites. The synthetic nature of the products make them suitable for use in the ground where high levels of durability are required. Needless to say, those materials may be destructible. Geosynthetics are available in a wide range of forms and materials, each to suit a slightly different end use. These products have a wide range of applications and are currently used in many civil and geotechnical engineering applications including roads, airfields, railroads, embankments, retaining structures, reservoirs, canals, dams, bank protection and coastal engineering.

Contents

[edit] History

Geotextile used in road construction
Geotextile used in road construction

Geosynthetics of different sorts have been used for thousands of years. They were used in roadway construction in the days of the Pharaohs to stabilise roadways and their edges [1]. These early geotextiles were made of natural fibres, fabrics or vegetation mixed with soil to improve road quality, particularly when roads were built on unstable soil. Although modern geosynthetics bear little resemblance to those used in Egyptian times, the general principles remain the same. The development of geosynthetics has been slow, mainly due to the limitations of the materials used. With the recent development of Polymers, the development of Geosynthetics has moved along swiftly. Their relatively recent development and acceptance by industry is highlighted by the fact that the International Geosynthetics Society (IGS) was founded in Paris 1983. [2].

[edit] Types, Materials & Manufacture

Collage of Geosynthetic products
Collage of Geosynthetic products

Geotextiles These are usually produced as either woven or non-woven textiles. Woven geotextiles are produced by the interlacing of yarns to leave a finished material that has a discernible warp and weft[3]. Non-woven geotextiles are produced by various methods other than weaving, mainly heat bonded, needle punched and chemically bonded. Woven and non-woven geotextiles are manufactured from mainly polymeric yarns and fibres, consisting primarily of polypropylene, polyester, polyethylene and polyamide. There are a small group of Geotextiles that are still produced from fibrous materials, used mainly in erosion control. Their degradable characteristics are beneficial in some applications.

Geogrids/Geonets These are discernibly stiffer than geotextiles and have relatively large voids within the material. Methods of production vary but include extrusion, bonding or interlacing. They can be produced from nearly all polymeric materials. These are used to strengthen fill materials in geotechnical applications. They provide increased shear strength between soil strata interfaces. Their tensile strength can prevent or decrease the degree of differential settlement in some applications by transmitting the load over a broader area of soil thereby diminishing the vertical stress in the soil.

Geomembranes Essentially impermeable sheets produced from polymeric materials. Geomembranes are manufactured several ways, excluding woven methods as they would leave unacceptably large voids in the material. Suitable materials include PVC, Polypropylene, Polyethylene and HDPE.

Geocomposites, geosynthetics which are a combination of any of the above three. The materials and manufacturing methods vary with the composite Geosynthetics used.

[edit] Applications

Table showing the general suitability of geosynthetic products to certain applications
Table showing the general suitability of geosynthetic products to certain applications
Collection of illustrations showing the basic functions of Geosynthetics
Collection of illustrations showing the basic functions of Geosynthetics

Among other uses, geosynthetics can be used for Separation, Filtration, Reinforcement, Drainage, Protection and Moisture Barriers[4]. Different geosynthetics are suited for various applications and the diagram to the right illustrates their suitability.

Filtration can significantly enhance the performance of a geotechnical structure, and geosynthetics can be used to produce an effective filtration system[5]. The job of a filter is to allow water to pass through the plane of the filter, whilst retaining particles of the filtered soil. Filtration can improve the performance of a geotechnical structure by controlling the erosion of the structure and reducing the amount of fines that are washed out of the soil matrix. When fines get washed out of a soil it can reduce the cohesion of the matrix and thus the strength of the soil, referred to piping. Mitigating these two problems also improves the durability of a structure. Geosynthetic filters can improve the reliability and performance of traditional graded soil filters and require less work to construct. Geotextiles are well suited to this application.

Drainage required in nearly all geotechnical structures. Whether used to remove surface water from a sports field, or to reduce lateral pressure on a retaining wall, the need for effective drainage cannot be underestimated. Drains of various designs have been used in the past, most based on the use of a high permeability layer built into the ground using aggregates, single layers of Geosynthetics can produce the same results. Drains can be distinguished from filters as such; water travels across the plane of filters and travels with the plane of drains. Geotextiles and geocomposites are well suited to this application.

Protection/Barrier In some geotechnical applications it is necessary to separate or protect one section of the works from another. This could be for a multitude of reasons, including stopping leachate seepage, protecting a structure from moisture and protecting a geotechnical structure from erosion. Geotextiles and Geomembranes are suited to this application.

Separation The geosynthetic acts to separate two layers of soil that have different particle size distributions. For example, geotextiles are used to prevent road base materials from penetrating into soft underlying soils, thus maintaining design thickness and roadway integrity. Separators also help prevent fine-grained subgrade soils from being pumped into permeable granular road bases[6]. Geotextiles and geomembranes are most suited to this application.

Reinforcement Geosynthethics can be used to reinforce a soil mass in, increasing the effective angle of shear and increasing the stability of an earth structure. In the reinforcement function, the geosynthetic is subjected to a sustained tensile force. Soil and rock materials are noted for their ability to withstand compressive forces and their relative low capacity for sustained tensile forces. In much the same way that tensile forces are taken up by steel in a reinforced concrete beam, the geosynthetic supports tensile forces that cannot be carried by the soil in a soil/Geosynthetic system. Geogrid/geonets and geotextiles are best suited to this function.

[edit] Disadvantages

Illustration of how to store Geosynthetics on site
Illustration of how to store Geosynthetics on site
  • As the materials are relatively new to the geotechnical industry, there is still concern about their long-term performance. They are still regarded by some sections of the industry as not being “time-served.”
  • Unlike soil and rock, geosynthetics require careful handling and storage[7]. Small damage to the material's matrix can seriously reduce the function of the material. A puncture in a leachate barrier is a good example of this.
  • The performance of geosynthetics under dynamic flow conditions is relatively unknown and most design codes assume a constant seepage.
  • Moisture barriers may stop water ingress to a structure but they also stop water vapour leaving the structure[8].
  • Some polymers are susceptible to chemical attack and are degraded by UV light and organic solvents[9].

[edit] See also

[edit] References

  1. ^ Geotextiles, "The fabric of erosion control" [1]Accessed 20th May 2006
  2. ^ IGS, "About the IGS" [2] Accessed 27th May 2006
  3. ^ Joint Departments of the Army and Air Force (1995), "TM 5-818-8/AFJMAN 32-1030, Engineering Use of Geotextiles" Washington DC [3] Accessed 29th May 2006
  4. ^ Propex Fabrics (1994), "Technical Note No.1: Geosynthetic Functions" [4] Accessed 29th May 2006
  5. ^ Kutay and Aydilek (2005), "Filtration Performance of Two-layer Geotextile Systems" Geotechnical Testing Journal, Volume 28 No.1
  6. ^ IGS, "Geosynthetics Functions" [5] Accessed 28th May 2006]
  7. ^ Propex Fabrics (1993), "Technical Note No.2: Handling and Storage of Geosynthetics" [6] Accessed 28th May 2006
  8. ^ Button & Lyton (2003), "Geosynthetics in Flexible and Rigid Pavement Overlay Systems to Reduce Reflection Cracking" [7] Accessed 28th May 2006
  9. ^ ASTM (1992), "D 4873 Standard Guide for Identification, Storage and Handling of Geotextiles", Annual Book of ASTM Standards, Vol. 4.08. American Society for Testing and Measurements, Philadelphia, p1056-1057

[edit] External links

Retrieved from "http://en.wikipedia.org../../../g/e/o/Geosynthetics.html"