Ford FT-B

From Wikipedia, the free encyclopedia

Ford FT-B
Type	armoured car
Place of origin	Poland
Service history
In service	1920-1931
Used by	Poland
Wars	Polish-Bolshevik War
Production history
Designer	Tadeusz Tański
Designed	1920
Manufacturer	Gerlach i Pulst
Produced	1920
Number built	17
Specifications
Weight	1350 kg
Length	3.25 m
Width	1.55 m
Height	1.73 m
Crew	2
Armour	8 mm
Primary armament	1 x 7.92 mm Maxim 08/15 1250 bullets
Secondary armament	25 x hand grenades
Engine	4-cylinder 2900 cm³ gasoline-fed water-cooled straight engine 22.5 hp
Power/weight	16.6 hp/t
Suspension	transversely mounted semi-elliptical spring for each of the axles
Operational range	250 km
Speed	50 km/h

The Ford FT B (also known as Ford Tf-c and model 1920) was the first armoured car designed and built in Poland. Built on the chassis of the famous Ford T and armoured with re-used armoured plates, the car was a successful design as for its times. The main designer was the engineer Tadeusz Tański. The armoured vehicle originated on account of the high demand during the Polish-Soviet war in 1920.

After the outbreak of the Polish-Soviet War in 1919, the Polish Army was severely under-equipped. Except for a number of FT-17 tanks arrived with the Blue Army, the Polish forces lacked any armoured reconnaissance vehicles. During the Soviet offensive leading to the battle of Warsaw the situation became even more tragic as many Austin-Putilov cars captured from the Red Army were retaken by the Bolsheviks. It was then that engineer Tadeusz Tański, a renown inventor and a worker of the Ministry of Military Affairs, designed his armoured car. The project originated within only 2 weeks out from Tanski’s initiative. The prototype was prepared in less than two weeks in the Gerlach i Pulsing works in Warsaw. After a series of tests the serial production started, and each of the battle-ready cars was immediately dispatched to the front-line and attached to various units. Altogether a series of 16 or 17 cars were made.

The project was based on the successful Ford T, one of the most popular cars of the epoch. The chassis and the levers were significantly reinforced and the fuel tank was moved. In addition, the crank was extended to allow for starting the engine from the inside and the dashboard had been modified. The armoured plating was hand-made out of the scrapped German armoured trench shields attached to the chassis by bolts.

The FT-B cars took part in the later stage of the Polish-Soviet war and fought in the battles along the Wkra river and in the battle of Warsaw, as well as the battle of Kowel and in numerous other battles.

The high speed, agility and the uncomplicated servicing and repair because of the chassis of commercial Ford T also belonged to the advantages of the armoured vehicle. The armoured vehicles managed in spite of raised mass in well heavy terrain and were able to cross also weak bridges on account of their low mass in comparison to other armoured vehicle. The Ford Tf C was really small in comparison to other armored vehicles of the past, as for example to the 2 times bigger Austin-Putilov, and offered an only surface, which was hardly to hit. Nevertheless, the consequence was that Ford Tf C were very narrow inside, and the driver had to steer strongly squatted. Another lack were also overheating engines happened rather often during longer cross-country races or with let down cooler armour plating. Also the springs were overloaded in spite of strengthening, but the vehicle was urgently required and the advantages offset the defects. In 1921 Tanski offered to build an other series of 30 vehicles, however, this was rejected, because the war was over and no other armoured vehicles were required. 12 Fords Tf C armored vehicles outlasted the war and were in use until 1931. Some had painted proper names like "Osa" (wasp), "Mucha" (fly), "Komar" (mosquito) on their armor.