FMECA
From Wikipedia, the free encyclopedia
 |
This article or section is in need of attention from an expert on the subject. Please help recruit one or improve this article yourself. See the talk page for details. Please consider using {{Expert-subject}} to associate this request with a WikiProject |
Failure Mode, Effects, and Criticality Analysis (FMECA) is an extension of FMEA and was introduced shortly after it. In addition to the basic FMEA, it includes a criticality analysis, which is used to chart the probability of failure modes against the severity of their consequences. The result highlights failure modes with relatively high probability and severity of consequences, allowing remedial effort to be directed where it will produce the greatest value.
The typical goal, when FMECA is performed as part of a design project, is to eliminate failure modes with high severity AND probability, and to reduce as much as possible those with high severity or high probability. If the Criticality Analysis is performed iteratively during the design process, the charted failure modes should be seen to migrate to the left and bottom (typically) of the chart.
This enables priority ranking by means of the so called Risk Priority Number. The RPN is a result of a multiplication of detectability (D) * severity (S) * occurrence (O). Each on a scale from 0 to 10. The highest RPN is 10*10*10 = 1000. This means that this failure is not detectable by inspection, very severe and the occurrence is almost sure. If the occurrence is very sparse, this would be 1 and the RPN would decrease to 100. So criticality analysis enables you to focus on the highest risks.
