Ensoniq TS 10
From Wikipedia, the free encyclopedia
The Ensoniq TS-10 was a synthesizer / music workstation introduced by Ensoniq in 1993. It featured synthesis, user sample playback, sequencer, effects and performance facilities in a 61-key package. Another version, with 76 weighted keys, but otherwise identical features except polyphonic aftertouch, was offered as the TS-12.
[edit] Main Features
The TS series sported 32-note polyphony, integrated 24-bit effects engine, (with 48 bit accumulation) a 30,000 note sequencer (expandable to over 100,000 via proprietary memory chips) which featured up to 24 tracks, full MIDI capabilities. The design was a direct evolution of Ensoniq's previous VFX and SD synthesizers. While the synthesis estructure lacked a resonant filter, which limited the sample+synthesis possibilities, the TS could read ASR samples directly. This feature allowed musicians to play sounds from a vast library of sample disks and CD-ROMs (via SCSI expansion option).
The TS-10 featured polyphonic aftertouch and a good keyboard feeling, which was much liked by pro musicians. In Ensoniq's tradition of ease of use, the front panel offered plenty of buttons for dedicated functions, and a large 40 x 2 vacuum fluorescent display, easier to read onstage than conventional LCD displays.
Synthesis structure. The TS offered up to 6 oscilators per patch or sound. Each oscilator was processed by its own pitch, filter and amplifier blocks, with dedicated LFOs and envelope generators for each block. The architecture allowed various modulation sources, such as keyboard velocity, modulation and pitch wheels, etc. to modify several instances of the sonic chain. Despite the well-specified architecture, the filter didn't featured any kind of resonance. This limited the possibilities of emulating analog and heavily-filtered sounds. However, this was a common omission from several manufacturers of the early 90's. The total 32-note polyphony was reduced when using more than one waveform per patch. The user patches could be stored in one of 120 memories, or saved to floppy disk.
Hyperwave. It was an attempt to offer a kind of basic wavesequencing, it essentially was a series of user-defined waveforms, taken from the internal ROM or sample RAM area, and played in sequence with definable playback step times, pitch and other parameters. Clever use of this facility could produce complete rhythmic patterns. One big limitation was the wavesequencing timing, which was fixed at patch level and not tempo-dependent.
Effects. An integral component of Ensoniq synths, the TS' effects were first-class and well specified, at 24-bit and 32 kHz engine. The effects block was arranged in several fixed algorithms, which allowed up to three simultaneous effects at once, plus a dry signal path. The effects list was comprehensive, including reverbs, flangers, chorus, compressors, delays, etc. While adequate at single patch level, the effects block had to be shared by all instruments when the sequencer was used, meaning that only selected sounds could ported their effects to the mix.
Sequencer. Ensoniq's approach for sequencing was somewhat different from other manufacturers. Instead of offering a linear set of tracks for recording, the TS required the user to record short sequences (12 tracks each) to use as a base for song structure, then chaining them and layering another 12 linear tracks on top of the chained blocks. Some people liked the scheme very much, while others hated it for a variety of reasons. Anyway, the sequencer editing options were full specified, including quantization with audition, controller editing and scaling, MIDI functions per track, etc. The keyboard could store up to 30 songs with 100 sequences per song, memory-permitting, and the whole bag was kept in memory when the synth was turned off. Modern synthesizers, with larger and better sequencers, demand the user to save his work before power down, since the sequencer memory is no longer backed up.
Sample playback. In addition to the machine's internal 6 Mbyte ROM sampled waveforms, the user could install up to 8 Mbyte (devided into two banks of 4MB) sample RAM (volatile), via 30-pin SIMMs. The samples could be loaded from the floppy disk drive, or via a SCSI CDROM attached to the machine, containing an ASR-format disk. The synth even remembered the mapping of samples and sounds used, and requested the appropriate disks for loading in power-up. Although, the TS didn't import WAV or AIFF format samples and the disk format used wasn't MS-DOS compatible, so the user was limited to load samples available in the ASR library.
Performance features. The TS offered the ubiquitous pair of modulation and patch wheels, polyphonic aftertouch, and 'patch select' buttons for easily changing tonal variants of a patch. It was very easy to layer up to three single sounds, or split the keyboard in zones for internal or MIDI playing control, without cumbersome menu editing.
[edit] In Use
The TS suffered from limitations such as the relatively low polyphony (32 notes), the non-resonant digital filter and the proprietary format used for floppies, which was incompatible with anything else. This prevented Standard MIDI Files to be read by the machine, and the strange track arrangement of the sequencer limited the MIDI multitimbral parts of the TS to 12 instead of the standard 16.
The vacuum fluorescent display, although cool-looking and very easy to read, was prone to malfunction after much time of use and very hard to replace or repair. Even Ensoniq acknowledged this problem by creating a variant called the TS-10 Plus, which used a conventional LCD display instead of the vacuum one. This model also had the SCSI expansion installed and the full sample memory expansion also installed.
The TS series were well received by musicians and producers, mainly because of the rich, professional sound they offered, the enormous ASR sample library that it could load, and the live performance features that offered.
