DSLinux
From Wikipedia, the free encyclopedia
DSLinux is a port of the Linux operating system to the Nintendo DS.
 |
This article may require cleanup to meet Wikipedia's quality standards. Please discuss this issue on the talk page or replace this tag with a more specific message. This article has been tagged since December 2006. |
Contents |
[edit] Software
DSLinux runs a modified uClinux kernel. It is currently based on uCLinux 2.6.14 (Linux-2.6.14-hsc0). It only runs in textmode and nano-x which is displayed via a custom framebuffer console driver. Input is done via a keyboard displayed on the touchscreen of the Nintendo DS.
DSLinux is compiled using a GCC-based cross-compilation toolchain for ARM processors.
Ncurses has been ported, so DSLinux is in theory capable of running any application that has an ncurses-based user interface. It also runs basic shell applications provided by BusyBox. The C-library is uClibc.
DSLinux has no package management facilities. Instead, DSLinux builds are distributed as a single tar archive.
[edit] Memory limitations
The Nintendo DS does not have a memory management unit (MMU), and has only 4 MiB of RAM. Userspace XIP and SLOB memory allocation were the first techniques used to increase the amount of available RAM a little. Later, support for the internal RAM present on some add-on hardware devices, such as the SuperCard or M3, has been added, offering an extra 32MB of memory. Adding support for external RAM was not trivial, as the GBA slot bus only supports 16-bit writes. If only 8 bits are sent over the bus, the result ending up in memory is garbage. A DSLinux developer called Amadeus found a workaround for this, which involved replacing "strb" (store byte) ARM assembly instructions with "swpb" (swap byte) instructions. The swpb instruction results in a cache hit, causing a whole 16-bit wide cache line to be written back to memory over the bus, instead of a single byte, thus eliminating all 8-bit writes over the bus. Amadeus modified the GCC code generator for ARM so that all applications compiled for DSLinux now use swpb instead of strb instructions. Assembly code in the Linux kernel had to be adapted manually.
[edit] Supported hardware
With the exception of the microphone, all hardware inside the Nintendo DS is supported by DSLinux. The Nintendo DS firmware can be read from /dev/firmware, but write support is left out for safety reasons.
DSLinux supports storing files on a variety of add-on hardware devices, none of which are officially endorsed by Nintendo. DSLinux can store files in SRAM memory found in GBA Flash Carts and CompactFlash and SD cards, which can be used with any of the following adaptors: GBAMP, M3, or SuperCard.
[edit] See also
[edit] External links
| Nintendo DS homebrew | |
|---|---|
| Storage devices | GBA flash cartridge · GBA Movie Player · DSLink |
| Booting tools | FlashMe · NoPass · PassMe · WiFiMe |
| Homebrew programming | Moonshell · DSLinux · libnds · PAlib |
 |
This Linux distribution-related article is a stub. You can help Wikipedia by expanding it. |
