Dry measure

From Wikipedia, the free encyclopedia

Dry measures are units of volume used to measure bulk commodities which are not liquid. They are typically used in agriculture, agronomy, and commodity markets to measure grain, dried beans, and dried and fresh fruit (e.g. a peck of apples is a retail unit); formerly also salt pork and fish. They are also used in fishing for clams, crabs, etc. and formerly for many other substances (e.g. coal, cement, lime) which were typically shipped and delivered in a standardized container such as a barrel.

They are often confused or conflated with units of mass, assuming a nominal density, and indeed many units of dry measure are now largely units of mass (see bushel).

Contents

[edit] Metric units

In the original metric system, the unit of dry volume was the stere, but this is not part of the modern metric system; the liter and the cubic meter (m³) are now used. However, the stere is still widely used for firewood.

[edit] Imperial and U.S. customary units

In Imperial and U.S. customary units, most units of volume exist both in a dry and a liquid version, with the same name, but different values: the dry hogshead, dry barrel, dry gallon, dry quart, dry pint, etc. The bushel and the peck are only used for dry goods.

Many of the units are associated with particular goods, so for instance the dry hogshead has been used for sugar and for tobacco and the peck for apples. There are also special measures for special goods, such as the cord of wood, the sack, the bale of cotton, the box of fruit, etc.

Because it is difficult to measure actual volume and easy to measure mass, many of these units are now also defined as units of mass, specific to each commodity, so a bushel of apples is a different weight from a bushel of wheat (weighed at a specific moisture level). Indeed, the bushel, the best-known unit of dry measure because it is the quoted unit in commodity markets, is in fact a unit of mass in those contexts.

Conversely, the ton used in specifying tonnage and in freight calculations is often a volume measurement rather than a mass measurement.

In U.S. cooking, dry and liquid measures are the same: the cup, the tablespoon, the teaspoon.

US dry measures are 16% larger than liquid measures; this is advantageous when cooking with fresh produce, as a dry pint of vegetables after trimming ends up being about a cooking (liquid) pint.

[edit] Struck and heaped measurement

The volume of bulk goods is usually measured by filling a standard container, so the containers' names and the units' names are often the same, and indeed both are called "measures". Normally, a level or struck measure is assumed, with the excess being swept off level ("struck") with the measure's brim—the stick used for this is called a "strickle". Sometimes heaped or heaping measures are used, with the commodity heaped in a cone above the measure.

[edit] Imperial/U.S. units of dry measure

  • 1 pint (pt) ≈ 550.610 mL
  • 1 quart (qt) = 2 pt ≈ 1.101 L
  • 1 gallon (gal) = 4 qt = 268.8025 in³ = 4.404 842 803 2 L
  • 1 peck (pk) = 8 qt = 2 gal ≈ 8.81 L
  • 1 bushel (bu) = 2150.42 cu in = 4 pk ≈ 35.239 L
In other languages