DEC Multia

From Wikipedia, the free encyclopedia

A Multia computer and monitor

The Multia, later re-branded the Universal Desktop Box, was a line of computer workstations produced by Digital Equipment Corporation in the mid-1990s. The line is notable in that units were offered with either an Alpha AXP or Intel Pentium processor as the CPU, and most hardware other than the backplane and CPU were interchangeable. Both the Alpha and Intel versions were intended to run Windows NT.

The Multia included a compact case which left little room for expansion cards; also, thermal air flow was restricted, which caused premature hardware failure because of overheating.

1 Hardware specifications
2 Models
3 References
4 External links

[edit] Hardware specifications

The Alpha Multias included either an Alpha AXP 21066 or 21066A microprocessor running at 166 MHz or 233 MHz respectively, and came standard with 16 or 24 MB of RAM (expandable to 128 MB (officially, but will accept up to 256MB)). Because the 21066 was a budget version of the Alpha 21064 processor, it had a slower bus and performance was roughly equivalent to a Pentium running at 60 MHz; furthermore, the standard RAM capacity was a severe restriction on the performance of these workstations. The Alpha Multias came with the TGA (DEC 21030) graphics adapter.

Standard peripherals on both Alpha and Intel models included a SCSI host adapter, DEC 21040 Ethernet controller, two PCMCIA slots, two RS-232 ports, a bi-directional parallel port, a 2.5 in or 3.5 in SCSI or ATA hard disk (340 MB to 1.6 GB), PS/2 keyboard and mouse ports, and a PCI slot (on models with 2.5 in hard disks).

[edit] Models

Multia models comprised:

Alpha Multia (codenamed QuickSilver):
- VX40: 166 MHz 21066, optional floppy disk drive and external SCSI
- VX41: 166 MHz 21066 upgradable to 233 MHz 21066A
- VX42: 233 MHz 21066A
Intel Multia (codenamed Minerva):
- VX51: 100 MHz Pentium (P54)

In 1996, Digital began offering the Alpha Multia without Windows NT and renamed the line the "Universal Desktop Box" (nicknamed "UDB"). Prices were quite low, such that for the first time many enthusiasts and hobbyists could afford an Alpha AXP-based computer. The Multia or UDB can run Windows NT for Alpha through Windows NT 4.0 Service Pack 6 (although Windows 2000 was never officially released for the Alpha platform, Windows 2000 Beta was released and in fact runs on the Multia), and both Linux and NetBSD are available for the Multia. Additionally, both Digital UNIX and OpenVMS can be configured to run on the Multia (with certain limitations), although initially such operating systems were disabled from running on the budget Multia line.

The Multia came configured with the ARC firmware console for running Windows NT, although SRM was also available.