Crupper
From Wikipedia, the free encyclopedia
A crupper is a piece of tack used on horses to keep a saddle or surcingle from sliding forward. It consists of a strap with a buckle on one end, to adjust the crupper's length, and a padded, rounded strap that passes under the horse's tail.
Cruppers are usually seen on round or overweight ponies or mules. They are also common on driving horses.
[edit] Putting On the Crupper
The skirt of the tail is doubled over and slipped through the rounded strap. There should be no tail hair under the tail piece of the crupper. The buckle-end strap attaches to a ring on the back of the saddle (which may need to be added by a saddler, as most saddles no longer have a D-ring on the cantle), or to the middle ring on a surcingle. It should be snug, so to keep the saddle in place, but not so tight that the horse is irritated or the skin of the tail is damaged.
A crupper must be kept very clean, or it can abrade the skin under the trail and cause the horse to start kicking. A poorly adjusted crupper can cause severe discomfort, angering a horse or cause sores on the horse's dock.
It is advisable to longe a horse with a crupper before riding him in one, so he may get used to the feel of it under his tail.
[edit] Fitting the Crupper
The crupper must be adjusted so that it is not too long, which will not allow it to work and may cause soring, or too short, which will pull the tail out of position and may cause the crupper to come off. It should be placed up under the root of the tail, but without any forward pulling.
