Cowboy boot
From Wikipedia, the free encyclopedia
Cowboy boots refer to a specific style of riding boot, historically worn by cowboys. They have a high heel, rounded to pointed toe, high shaft, and no lacing. Cowboy boots are normally made from cowhide leather but are also sometimes made from "exotic" skins such as alligator, snake, ostrich, lizard, eel, elephant, sting ray, elk, buffalo, and the like.
There are two basic types of cowboy boots, western and roper. The western style is distinguished by an angled heel, usually over one inch high. Although western boots can be customized with a wide variety of toe shapes, they are usually made with a pointed toe. The roper style will have a more rounded heel, usually one inch or shorter, and will have the heel extend straight down. Roper boots are usually made with rounded toes, but new styles are emerging with a more squared toe.
Contents |
[edit] History
In spite of the fact that it is closely associated with US culture, the cowboy boot is originally Mexican and traditionally part of the outfit of the Mexican vaquero (cowboy). It became part of US culture with the occupation of formerly Mexican territories and the fact that the majority of cowboys were Mexicans from those territories. The rich ornamentation is part of the typical charro-suit, the often lavishly embroidered outfit of hacenderos and rancheros.
The boot was taken up by bootmakers in the cattle ranching areas of Texas, Oklahoma, and Kansas. The two most renowned bootmakers of the era were Charles Hyer of Hyer Brothers Boots in Olathe, Kansas, and H. J. "Big Daddy Joe" Justin of Justin Boots in Spanish Fort, Texas and later Nocona, Texas. The tradition of the cowboy boot also continues in Mexico, especially in the States of Jalisco, Guanajuato, Nuevo Leon.
[edit] Design
While mounting, the slick, treadless leather sole of the boot allowed easy insertion of the foot into the stirrup of the Western saddle. While an extremely pointed toe is a modern stylization appearing in the 1940s, the toe of the original boots retained the more rounded shape of other boots. A slight point to the toe does make it somewhat easier to quickly insert the foot in the stirrup, but an extremely pointed toe is not helpful and not practical in a working boot.
While mounted, the tall heel prevented the foot from sliding forward through the stirrup, which could be life threatening if it happened and the rider were to be unseated. The tall shaft, comfortably loose fit and lack of lacing might save a cowboy's life since his body weight would pull his foot out of the boot if he were unseated and his boot remained stuck in the stirrup.
While dismounting, the slick sole allows the boot to easily come free of the stirrup. The tall leather shaft of the boot helped to hold it in place in the absence of lacing. While mounted, the shaft protected the leg from saddle rubbing, brush and thorns. While dismounted, the shaft helped protect the leg and foot from rocks, brush, thorns, and snakes. In wet weather or creek crossings, the high tops helped prevent the boot from filling with mud and water.
Decoration varied widely. Early boots were plain leather, but as custom boots were made, cowboys asked for decorative stitching, cutouts in the high tops (early on, often Texas stars), and different materials. Modern cowboy boots are available in all colors of the rainbow and a pair has been made from just about every animal whose skin can be made into leather.
One accessory used with cowboy boots is a spur, which is sometimes attached to the heel of each boot for the purpose of goading the horse while riding.
[edit] Fitting
Many cowboy boot companies have been in operation since the 19th century. Each manufacturer has developed its own proprietary lasts for producing boots, which are considered trade secrets and are highly guarded. Because of this, standardization has been slow, and fitting between companies is not always consistent. When considering wearing a cowboy boot from a different manufacturer, it is recommended to seek assistance from a knowledgeable merchant who specializes in cowboy boots. Some wearers will swear by one manufacturer's fit, while others will not perceive any difference between brands.
The fit will vary depending on the type of toe that is sought. Pointed toes leave a narrower space between the toes and the tip of the boot which may cause discomfort. This is avoided by selecting a half size larger than the wearer's normal size. A rounder toe (like a roper or a Wellington) will fit more like a regular shoe. Another factor is leather. A cowhide or kidskin boot will become softer with wear, molding to the wearer's foot. That is why it is recommended to select a snug size because the boot will eventually "break in" and a loose fit will become sloppy.
[edit] Manufacturers
- Alberta Boot Company
- Ariat
- Boulet
- Champion Attitude
- Double-H
- Frye
- Justin
- Lucchese
- Nocona
- Olathe
- Old Gringo
- Paul Bond
- Red Wing
- Sendra 1
- Sendra 2
- Tony Lama
[edit] References
- Texas Monthly, January 1999: Art of the Boot
- Howard Zinn, A People's History of the United States, New York: Harper Collins, 2003.
