Coulomb blockade

From Wikipedia, the free encyclopedia

In physics, a Coulomb blockade, named after Charles-Augustin de Coulomb, is the increased resistance at small bias voltages of an electronic device comprising at least one low-capacitance tunnel junction.

A tunnel junction is, in its simplest form, a thin insulating barrier between two conducting electrodes. If the electrodes are superconducting, Cooper pairs with a charge of two elementary charges carry the current. In the case that the electrodes are normalconducting, i.e. neither superconducting nor semiconducting, electrons with a charge of one elementary charge carry the current. The following reasoning is for the case of tunnel junctions with an insulating barrier between two normalconducting electrodes (NIN junctions).

Schematic representation of an electron tunnelling through a barrier

According to the laws of classical electrodynamics, no current can flow through an insulating barrier. According to the laws of quantum mechanics, however, there is a nonvanishing (larger than zero) probability for an electron on one side of the barrier to reach the other side (see quantum tunnelling). When a bias voltage is applied, this means that there will be a current flow. In first-order approximation, that is, neglecting additional effects, the tunnelling current will be proportional to the bias voltage. In electrical terms, the tunnel junction behaves as a resistor with a constant resistance, also known as an ohmic resistor. The resistance depends exponentially on the barrier thickness. Typical barrier thicknesses are on the order of one to several nanometers.

An arrangement of two conductors with an insulating layer in between not only has a resistance, but also a finite capacitance. The insulator is also called dielectric in this context, the tunnel junction behaves as a capacitor.

Due to the discreteness of electrical charge, current flow through a tunnel junction is a series of events in which exactly one electron passes (tunnels) through the tunnel barrier (we neglect events in which two electrons tunnel simultaneously). The tunnel junction capacitor is charged with one elementary charge by the tunnelling electron, causing a voltage buildup $U = e / C$ , where $e$ is the elementary charge of 1.6×10^-19 coulomb and $C$ the capacitance of the junction. If the capacitance is very small, the voltage buildup can be large enough to prevent another electron from tunnelling. The electrical current is then suppressed at low bias voltages and the resistance of the device is no longer constant. The increase of the differential resistance around zero bias is called the Coulomb blockade.

In order for the Coulomb blockade to be observable, the temperature has to be low enough so that the characteristic charging energy (the energy that is required to charge the junction with one elementary charge) is larger than the thermal energy of the charge carriers. For capacitances below 1 femtofarad (10^-15 farad), this implies that the temperature has to be below about 1 kelvin. This temperature range is routinely reached for example by dilution refrigerators.

Energylevels of source, island and drain (from left to right) in a single electron transistor for both the blocking state (upper part) and the transmitting state (lower part).

Single electron transistor with niobium leads and aluminium island

To make a tunnel junction in plate condenser geometry with a capacitance 1 femtofarad, using an oxide layer of electric permeability 10 and thickness one nanometer, one has to create electrodes with dimensions of approximately 100 by 100 nanometers. This range of dimensions is routinely reached for example by electron beam lithography and appropriate pattern transfer technologies, like the Niemeyer-Dolan technique, also known as shadow evaporation technology.

Another problem for the observation of the Coulomb blockade is the relatively large capacitance of the leads that connect the tunnel junction to the measurement electronics.

1 Single electron transistor
2 Coulomb Blockade Thermometer
3 Literature
4 External links

[edit] Single electron transistor

The simplest device in which the effect of Coulomb blockade can be observed is the so-called single electron transistor. It consists of two tunnel junctions sharing one common electrode with a low self-capacitance, known as the island. The electrical potential of the island can be tuned by a third electrode (the gate), capacitively coupled to the island.

In the blocking state no accessible energy levels are within tunneling range of the electron (red) on the source contact. All energy levels on the island electrode with lower energies are occupied.

When a positive voltage is applied to the gate electrode the energy levels of the island electrode are lowered. The electron (green 1.) can tunnel onto the island (2.), occupying a previously vacant energy level. From there it can tunnel onto the drain electrode (3.) where it inelastically scatters and reaches the drain electrode Fermi level (4.).

The energy levels of the island electrode are evenly spaced with a separation of $Δ E$ . $Δ E$ is the energy needed to each subsequent electron to the island, which acts as a self-capacitance $C$ . The lower $C$ the bigger $Δ E$ gets. It is crucial for $Δ E$ to be larger than the energy of thermal fluctuations $k B T$ , otherwise an electron from the source electrode can always be thermally excited onto an unoccupied level of the island electrode, and no blocking can be observed.

[edit] Coulomb Blockade Thermometer

Coulomb Blockade Thermometer is a primary thermometer based on electric conductance characteristics of tunnel junction arrays. The parameter V_½=5.439Nk_BT/e, the full width at half minimum of the measured differential conductance dip over a array of N junctions together with the physical constants provide the absolute temperature.

[edit] Literature

T. Henning, Charging effects in niobium nanostructures, PhD thesis, Mikroelektronik och Nanovetenskap, Chalmers Tekniska Högskola AB och Göteborgs Universitet, Göteborg/Sweden, 1999. Full text available online [1] as www.arxiv.org e-print cond-mat/9901308.