Cerium

Main article: Isotopes of cerium
iso	NA	half-life	DM	DE (MeV)	DP
¹³⁴Ce	syn	3.16 days	ε	0.500	¹³⁴La
¹³⁶Ce	0.185%	Ce is stable with 78 neutrons
¹³⁸Ce	0.251%	Ce is stable with 80 neutrons
¹³⁹Ce	syn	137.640 days	ε	0.278	¹³⁹La
¹⁴⁰Ce	88.450%	Ce is stable with 82 neutrons
¹⁴¹Ce	syn	32.501 days	β^-	0.581	¹⁴¹Pr
¹⁴²Ce	11.114%	> 5×10¹⁶ years	β^-β^-	unknown	¹⁴²Nd
¹⁴⁴Ce	syn	284.893 days	β^-	0.319	¹⁴⁴Pr

References

Cerium (IPA: /ˈsiːriəm, ˈsɪəriəm/) is a chemical element in the periodic table that has the symbol Ce and atomic number 58.

1 Notable characteristics
2 Applications
3 History
4 Occurrence
5 Compounds
6 Isotopes
7 Precautions
8 References
9 External links

[edit] Notable characteristics

Cerium is a silvery metallic element, belonging to the lanthanide group. It is used in some rare-earth alloys. It resembles iron in color and luster, but is soft, and both malleable and ductile. It tarnishes readily in the air. Only europium is more reactive than cerium among rare earth elements. Alkali solutions and dilute and concentrated acids attack the metal rapidly. The pure metal is likely to ignite if scratched with a knife. Cerium oxidizes slowly in cold water and rapidly in hot water.

Although cerium belongs to chemical elements group called rare earth metals, it is not rare at all. Cerium is available in relatively large quantities (68 ppm in Earth’s crust); in fact it is more common than lead.

Cerium in the +3 oxidation state is referred to as cerous, while the metal in the +4 oxidation state is called ceric.

Cerium(IV) salts are orange red or yellowish, whereas cerium(III) salts are usually white or colorless. Both oxidation states of cerium absorb ultraviolet light strongly. Cerium(III) can be used to make glasses that are colorless, yet absorb ultraviolet light almost completely. Cerium can be readily detected in rare earth mixtures by a very sensitive qualitative test: addition of ammonia and hydrogen peroxide to an aqueous solution of lanthanides produces a characteristic dark brown color if cerium is present.

Phase diagram of cerium

[edit] Applications

Uses of cerium:

In metallurgy:
- Cerium is used in making aluminium alloys.
- Adding cerium to cast irons opposes graphitization and produces a malleable iron.
- In steels, cerium degasifies and can help reduce sulfides and oxides.
- Cerium is used in stainless steel as a precipitation hardening agent.
- 3 to 4% cerium added to magnesium alloys, along with 0.2 to 0.6% zirconium, helps refine the grain and give sound casting of complex shapes. It also adds heat resistance to magnesium castings.
- Cerium is used in alloys that are used to make permanent magnets.
- Cerium is used as an alloying element in tungsten electrodes for gas tungsten arc welding.
- Cerium is a major component of ferrocerium, also known as "lighter flint". Although modern alloys of this type generally use Mischmetal rather than purified cerium, it still is the most prevalent constituent.
- Cerium is used in carbon-arc lighting, especially in the motion picture industry.
Cerium(IV) oxide
- The oxide is used in incandescent gas mantles, such as the Welsbach mantle, where it was combined with Thorium, Lanthanum, Magnesium or Yttrium oxides .
- The oxide is emerging as a hydrocarbon catalyst in self cleaning ovens, incorporated into oven walls.
- Cerium(IV) oxide has largely replaced Rouge in the glass industry as a polishing abrasive.
- Cerium(IV) oxide is finding use as a petroleum cracking catalyst in petroleum refining.
- Cerium(IV) additives to diesel fuel cause that to burn more cleanly, with less resulting air-pollution.
- In glass, cerium(IV) oxide allows for selective absorption of ultraviolet light.
Cerium(IV) sulfate is used extensively as a volumetric oxidizing agent in quantitative analysis.
Ceric ammonium nitrate is a useful one-electron oxidant in organic chemistry, used to oxidatively etch electronic components, and as a primary standard for quantitative analysis.
Cerium compounds are used in the manufacture of glass, both as a component and as a decolorizer.
Cerium compounds are used for the coloring of enamel.
Cerium(III) and cerium(IV) compounds such as cerium(III) chloride have uses as catalysts in organic synthesis.

[edit] History

Cerium was discovered in Bastnäs in Sweden by Jöns Jakob Berzelius and Wilhelm Hisinger, and independently in Germany by Martin Heinrich Klaproth, both in 1803. Cerium was so named by Berzelius after the dwarf planet Ceres, discovered two years earlier (1801). As origninally isolated, cerium was in the form of its oxide, and was named "ceria", a term that is still used. The metal itself was too electopositive to be isolated by then-current smelting technology, a characteristic of "earths" in general. But the development of electrochemistry by Humphrey Davy was only five years into the future, and then the earths were well on their way to yielding up their contained metals. Ceria, as isolated in 1803, contained all of the lanthanides present in the cerite ore from Bastnaes, Sweden, and thus only contained about 45% of what is now known to be pure ceria. It was not until Mosander succeeded in removing lanthana and "didymia" in the late 1830's that ceria was obtained pure. As an historical aside: Wilhelm Hisinger was a wealthy mine owner and amateur scientist, and sponsor of Berzelius. He owned or controlled the mine at Bastnaes, and had been trying for years to find out the composition of the abundant heavy gangue rock (the "Tungstein of Bastnaes") now known as cerite that he had in his mine. Mosander and his family lived for many years in the same house as Berzelius, and was undoubtedly persuaded by the latter to investigate ceria further. When the rare earths were first discovered, since they were strong bases like the oxides of calcium or magnesium, they were thought to be divalent. Thus, "ceric" cerium was thought to be trivalent, and the oxidation state ratio was therefore thought to be 1.5. Berzelius was extremely annoyed, to keep on getting the ratio 1.33. He was after all one of the finest analytical chemists in Europe. But he was a better analyst than he thought, since 1.33 was the correct answer!

[edit] Occurrence

Cerium is the most abundant of the rare earth elements, making up about 0.0046% of the Earth's crust by weight. It is found in a number of minerals including allanite (also known as orthite)—(Ca, Ce, La, Y)₂(Al, Fe)₃(SiO₄)₃(OH), monazite (Ce, La, Th, Nd, Y)PO₄, bastnasite(Ce, La, Y)CO₃F, hydroxyl bastnasite (Ce, La, Nd)CO₃(OH, F), rhabdophane (Ce, La, Nd)PO₄-H₂O, zircon (ZrSiO₄), and synchysite Ca(Ce, La, Nd, Y)(CO₃)₂F. Monazite and bastnasite are presently the two most important sources of cerium.

Cerium is most often prepared via an ion exchange process that uses monazite sands as its cerium source.

Large deposits of monazite, allanite, and bastnasite will supply cerium, thorium, and other rare-earth metals for many years to come.

[edit] Compounds

Cerium(IV)-sulfate

Cerium has two common oxidation states, +3 and +4. The most common compound of cerium is cerium(IV) oxide (CeO₂), which is used as "jeweller's rouge" as well as in the walls of some self-cleaning ovens. Two common oxidising agents used in titrations are ammonium cerium(IV) sulfate (ceric ammonium sulfate, (NH₄)₂Ce(SO₄)₃) and ammonium cerium(IV) nitrate (ceric ammonium nitrate or CAN, (NH₄)₂Ce(NO₃)₆). Cerium also forms a chloride, CeCl₃ or cerium(III) chloride, used to facilitate reactions at carbonyl groups in organic chemistry. Other compounds include cerium(III) carbonate (Ce₂(CO₃)₃), cerium(III) fluoride (CeF₃), cerium(III) oxide (Ce₂O₃), as well as cerium(IV) sulfate (ceric sulfate, Ce(SO₄)₂) and cerium(III) triflate (Ce(OSO₂CF₃)₃). The two oxidation states of cerium differ enormously in basicity: cerium(III) is a strong base, comparable to the other trivalent lanthanides, but cerium(IV) is weak. This difference has always allowed cerium to be by far the most readily isolated and purified of all the lanthanides, otherwise a notoriously difficult group of elements to separate. A wide range of procedures have been devised over the years to exploit the difference. Among the better ones: 1. leaching the mixed hydroxides with dilute nitric acid: the trivalent lanthanides dissolve in cerium-free condition, and tetravalent cerium remains in the insoluble reside as a concentrate to be further purified by other means. A variation on this uses hydrochloric acid and the calcined oxides from bastnaesite, but the separation is less sharp. 2. Precipitating cerium from a nitrate or chloride solution using potassium permanganate and sodium carbonate in a 1:4 molar ratio. 3. Boiling rare earth nitrate solutions with potassium bromate and marble chips. Using the classical methods of rare earth separation, there was a considerable advantage to a strategy of removing cerium from the mixture at the beginning. Cerium typically comprised 45% of the cerite or monazite rare earths, and removing it early greatly reduced the bulk of what needed to be further processed (or the cost of reagents to be associated with such processing). However, not all cerium purification methods relied on basicity. Ceric ammonium nitrate [ammonium hexanitratocerate(IV)] crystallization from nitric acid was one purification method. Cerium(IV) nitrate (hexanitratoceric acid) was more readily extractable into certain solvents (e.g. tri-n-butyl phosphate) than the trivalent lanthanides. However, modern practice in China seems to be to do purification of cerium by counter-current solvent extraction, in its trivalent form, just like the other lanthanides. Cerium(IV) is a strong oxidant under acidic conditions, but stable under alkaline conditions, when it is cerium(III) that becomes a strong reductant, easily oxidized by molecular dioxygen (or air). This ease of oxidation under alkaline conditions leads to the occasional geochemical parting of the ways between cerium and the trivalent light lanthanides under supergene weathering conditions, leading variously to the "negative cerium anomaly" or to the formation of the mineral cerianite. Air-oxidation of alkaline cerium(III) is the most economical way to get to cerium(IV), which can then be handled in acid solution.

[edit] Isotopes

Naturally occurring cerium is composed of 3 stable isotopes and 1 radioactive isotope; ¹³⁶Ce, ¹³⁸Ce, ¹⁴⁰Ce, and ¹⁴²Ce with ¹⁴⁰Ce being the most abundant (88.48% natural abundance). 27 radioisotopes have been characterized with the most {abundant and/or stable} being ¹⁴²Ce with a half-life of greater than 5×10¹⁶ years, ¹⁴⁴Ce with a half-life of 284.893 days, ¹³⁹Ce with a half-life of 137.640 days, and ¹⁴¹Ce with a half-life of 32.501 days. All of the remaining radioactive isotopes have half-lives that are less than 4 days and the majority of these have half-lives that are less than 10 minutes. This element also has 2 meta states.

The isotopes of cerium range in atomic weight from 123 u (¹²³Ce) to 152 u (¹⁵²Ce).

[edit] Precautions

Cerium, like all rare earth metals, is of low to moderate toxicity. Cerium is a strong reducing agent and ignites spontaneously in air at 65 to 80 °C. Fumes from cerium fires are toxic. Water should not be used to stop cerium fires, as cerium reacts with water to produce hydrogen gas. Workers exposed to cerium have experienced itching, sensitivity to heat, and skin lesions. Animals injected with large doses of cerium have died due to cardiovascular collapse.

Cerium(IV) oxide is a powerful oxidizing agent at high temperatures and will react with combustible organic materials. While cerium is not radioactive, the impure commercial grade may contain traces of thorium, which is radioactive. Cerium serves no known biological function.