Carmarthen and Cardigan Railway

From Wikipedia, the free encyclopedia

The Carmarthen and Cardigan Railway was a broad gauge railway from Carmarthen, Carmarthenshire, to Llandyssil, Powys, Wales.

Contents 1 Chronology 2 Stations 3 Broad gauge locomotives 3.1 Sharp, Stewart 4-4-0Ts 3.2 Rothwell 4-4-0STs 4 Standard gauge locomotives 5 References

[edit] Chronology

• 1854 Railway authorised from Carmarthen to Newcastle Emlyn by Act of Parliament
• 1860 Open temporarily from Carmarthen to Conwil, operated by the South Wales Railway
• 1861 Line reopened, now operated by Carmarthen and Cardigan Railway
• 1864 Railway extended from Conwil to Pencader then Llandyssil
• 1872 Line converted to standard gauge (although parts were already mixed gauge)
• 1881 Company sold to the Great Western Railway

[edit] Stations

• Carmarthen (1860)
• Bronwydd Arms (1860)
• Conwil (1860)
• Llanpumpsaint (1864)
• Pencader (1864)
• Llandyssil (1864)

[edit] Broad gauge locomotives

[edit] Sharp, Stewart 4-4-0Ts

Heron & Magpie

Power type	Steam
Builder	Sharp Stewart & Co.
Configuration	4-4-0T
Gauge	7 ft 0¼ in
Leading wheel size	3 ft 3 in
Driver size	5 ft 3 in
Wheelbase	18 ft 0 in
Cylinder size	17 in dia × 24 in stroke

• Heron (1861 - 1872)
• Magpie (1861 - 1872)

The first two locomotives for the Carmarthen and Cardigan Railway were 4-4-0 locomotives with straight side tanks, built by Sharp Stewart and Company in 1861.

After the line was converted to standard gauge in 1872, they were sold to the South Devon Railway and Cornwall Railway respectively, although the locomotives for both these railways were worked as a common pool. They were both rebuilt with saddle tanks.

In 1876 they became the property of the Great Western Railway and carried the numbers 2134 and 2135. Magpie was withdrawn in 1889 but Heron lasted until the gauge conversion. It worked the last broad gauge train from Tavistock to Plymouth Millbay railway station on 20 May 1892 before pulling the empty carriages to Swindon railway works for dismantling.

The locomotives were named after birds. See Heron and Magpie.

[edit] Rothwell 4-4-0STs

Etna & Hecla

Power type	Steam
Builder	Rothwell and Company
Configuration	4-4-0ST
Gauge	7 ft 0¼ in
Leading wheel size	3 ft 6 in
Driver size	5 ft 3 in, later 5 ft 6 in
Wheelbase	18 ft 4½ in
Cylinder size	17 in dia × 24 in stroke

• Etna (1864 - 1868)
• Hecla (1864 - 1872)

Two more locomotives were built by Rothwell and Company in 1864, this time with saddle tanks rather than side tanks.

Etna was sold to the South Devon Railway in 1868, and Hecla followed when the gauge was converted in 1872. They received the numbers 2132 and 2133; at some time Etna received a new saddle tank and its name was lost. They both survived until the end of the broad gauge in 1892.

The locomotives were named after volcanoes. See Mount Etna and Hekla.

[edit] Standard gauge locomotives

Four standard gauge locomotives were operated by the Carmarthen and Cardigan Railway, three of them secondhand from the Great Western Railway.

[edit] References

• The Locomotives of the Great Western Railway, Part 2: Broad Gauge. The Railway Correspondence and Travel Society. ISBN 978-0-906867-90-7. 
• MacDermot, E T (1931). History of the Great Western Railway, volume II 1863-1921. London: Great Western Railway. 
• Sheppard, Geof (2002). "The Last Broad Gauge Train". Broadsheet 47: 26-34. 
• Waters, Laurence (1999). The Great Western Broad Gauge. Hersham: Ian Allan Publishing. ISBN 978-0-906867-90-7.