Bowyer

From Wikipedia, the free encyclopedia

You have new messages (last change).
For people named Bowyer, see Bowyer (surname)

A bowyer is a person who makes bows for archery. The term bowyer typically implies a skilled craftsman, though with simpler designs even a beginner can produce a functional bow. Bowyers today usually make selfbows (bows made from one solid piece of wood), composite bows, or recurve bows. Compound bows are produced almost exclusively in factory.

Contents

[edit] Making a bow

The most important part of crafting a bow is ensuring that the materials used are not strained beyond their breaking point. Due to the large amount of energy stored in a drawn bow failures are often spectacular- often described of as explosions because of the loud crack and flying debris. If a bow is being made from wood or a combination of natural materials (often called a primitive or traditional bow) careful attention must be paid to the selected materials. There are often natural twists, knots, bends or other variations that must be taken into account and worked with to ensure that the bow will not fracture at any point along its length. Due to this, traditional bows must be made individually.

Glass bowyers who create fiberglass laminated bows, bows consisting of wood sandwiched by fiberglass layers, can create somewhat more standardized bows as fiberglass, not the wood, is the load bearing component and keeps the bow from breaking. The wood in a fiberglass bow serves the purposes of separating the fibreglass laminates, and of resisting shear. Most of the stress of a bent spring occurs in the surface layers, and the further apart they are, the greater the stress on them. A solid fibreglass bow tends to be heavy, and heavy bow limbs recoil more slowly than light ones. The limbs of a laminated bow can be lightened by the use of lighter materials such as wood. This wood must, however, be sufficiently strong to withstand the intense stress of shear, caused by the backing strip (that nearest the target) being under tension and the belly strip (that nearest the archer) being under compression. American rock maple has been extensively used, strips being machined for the purpose so that the thickness of the resulting limb can be predicted with reasonable accuracy. The wood must provide a perfect gluing surface and needs to be completely free of grease for most synthetic glues. Amateur bowyers clean the wood with acetone prior to glueing, a fraught business since acetone is easily absorbed by the skin, and impossible to prevent soaking into leather gloves or dissolving plastic gloves. Amateurs often use epoxy resins, and those manufactured specifically to resist shear are best for the purpose although it is essential to follow the exact proportions given by the manufacturers, by measuring qunatities with a chemical balance if necessary. Failures of fibreglass bows commercially produced are not unknown, and careful inspection of the broken limbs usually indicates that the bow has failed in shear. The greatest care must be taken to feather any wooden inserts, especially at the handle riser (the thickened part in the middle of the bow) and less importantly at the nocks (and axle mounts, in wheeled compound bows) as the shear stress seems to need a weak point to start a split. Feathering of the wood in between the fibreglass laminates must be accompanied by perfectly even pressure over the whole width of the limb, lest the centre part pucker up under clamping pressure and form either a void or a weakness filled only with glue. Common practice is to bind a bow in many strips of rubber cut from car or cycle inner tubes to apply great and even pressure, and leave the glue to cure for several days before unwrapping. Binding in this way tends to put greatest pressure on the edges of the laminates, encouraging the puckering, and weak thickening, of the middle strip of the bow limb. This is avoided by putting strips of soft, flexible material such as thin hardboard, above the top laminate before the rubber binding is applied. The strips are made about 12mm narrower than the bow limb, and, concentrating the pressure down the middle of the limb, greatly assist in obtaining a flat section during the glue curing time. These strips are discarded after the bow is released from the bow form.

Assuming a bow will not fail during shooting then other factors such as efficiency, aesthetics, and noise during shooting can all be important. How these factors affect the bows' design and construction depends on the purpose of the bow and preferences of the user.

[edit] History

Historically, a huge variety of bows have been produced for food gathering, warfare, and recreation. Who created these bows depended mainly on the type of bow being produced, but also on the quantity required.

In tribes or social groups that used wooden self-bows (bows made entirely from one piece of wood) bows would sometimes be crafted by the individual user; however, even with fairly simple bow designs it was often easier to rely upon a few skilled bowyers within the group. In medieval England, for example, professional bowyers produced the thousands of bows required for that country’s military. These bowyers could reportedly make an English longbow in as little as two hours (wooden selfbows normally take from 5-15 hours of work depending on the skill of the bowyer and how challenging a piece of wood is).

In cultures that used composite bows (bows made of several materials, often horn, wood, and sinew) skilled, devoted, craftsman had to be relied upon. Composite bows could be made relatively short, heavily recurved, and highly effective but the constituent materials had to be put under enormous stress and the bow’s limbs needed to be perfectly aligned. These demands required experienced bowyers who were willing to spend a great deal of time crafting their weapons. Though cultures such as the Mongols made incredible military use of powerful composite bows the ancient Turkish bowyers are typically considered to have been the most skilled. Because the glue used to apply each lamination was allowed to dry for months Turkish flight bows took up to a year to produce. The short, very recurved, sinew-horn-wood composite bows were exquisitely crafted and pushed the natural materials to their limits. In the 1500’s one such Turkish flight bow set the record for longest shot, 846 meters (925 yards), a record that stood until the 20th century and the invention of modern material science.

[edit] Bowyers in the United States

In the United States, Will and Maurice Thompson may have made some of their own bows, but many American bowyers were inspired by Art Young, Dr. Saxton Pope, and Will Compton. These included Chester Stevenson, Glenn St. Charles, Howard Hill, and Fred Bear. Following the publication of The Traditional Bowyer's Bibles in the 1990s, there has been a resurgence of traditional bow making in the United States. These include Jay St. Charles, the late Jay Massey, Oregon bowyer John Strunk, Tim Baker, Paul Comstock, and Jim Hamm, among others.

[edit] References

Retrieved from "http://en.wikipedia.org../../../b/o/w/Bowyer.html"