Barium fluoride

From Wikipedia, the free encyclopedia

Barium fluoride
Image:Barium fluoride.jpg
General
Molecular formula BaF2
Molar mass 175.324 g.mol-1
Appearance white cubic crystals
CAS number 7787-32-8
Properties
Density and phase 4.893 g.cm-3, solid
Solubility in water 1.7 g/kg (26°C)
Solubility in methanol
Solubility in ethanol
Melting point 1368 °C
Boiling point 2260 °C
Magnetic Susceptibility -5.1e-005 cm³/mol
Structure
Coordination
geometry
 ?
Crystal structure cubic
Thermodynamic data
Std enthalpy of
formation
 ?

fHo298

−???? kJ/mol
Standard molar
entropy
So298
 ??? J·K−1·mol−1
Heat of Fusion 101.5 J/g
Hazards
MSDS External MSDS
EU classification Toxic (T)
R-phrases R20, R22
S-phrases S28
Flash point Non-flammable
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
Related compounds
Other anions Barium chloride
Barium bromide
Barium iodide
Other cations Calcium fluoride
Strontium fluoride
Except where noted otherwise, data are given for
materials in their [[standard

state|standard state (at 25 °C, 100 kPa)]]
Infobox disclaimer and references

Barium fluoride (BaF2) is a chemical compound of barium and fluorine, also known as Barium(II) fluoride. It is a solid which can be a transparent crystal.

[edit] Applications

Barium Fluoride is transparent from the ultraviolet to the infrared, from 150-200 nm to 11-11.5 µm, and can be used as a material to make optical components such as lenses. It is used eg. in windows for infrared spectroscopy, in particular in the field of fuel oil analysis. Its transmittance at 200 nm is relatively low (0.60), but at 500 nm it goes up to 0.96-0.97 and stays at that level until 9 µm, then it starts falling off (0.85 for 10 µm and 0.42 for 12 µm).

Barium fluoride is also a common, very fast (one of the fastest) scintillator for the detection of X-rays, gamma rays or other high energy particles. One of its applications is the detection of 511 keV gamma photons in positron emission tomography; other material used in this application is eg. bismuth germanate. It responds also to alpha and beta particles, but, unlike most scintillators, it does not glow in ultraviolet light. It can be also used for detection of high-energy (10-150 MeV) neutrons, and use pulse shape discrimination techniques to separate them from simultaneously occurring gamma photons.

When heated to 500 °C, it gets corroded by water, but in dry environment it can be used up to 800 °C. Prolonged exposure to moisture degrades transmission in the vacuum UV range. It is less resistant to water than calcium fluoride, but is the most resistant of all the optical fluorides to high-energy radiation, though its far ultraviolet transmittance is lower than theirs. It is quite hard, and very sensitive to thermal shock.

Barium fluoride is used as a preopacifying agent and in enamel and glazing frits production. Its other use is in the production of welding agents (an additive to some fluxes, a component of coatings for welding rods and in welding powders). It is also used in metallurgy, as a molten bath for refining aluminium.

[edit] External links