Image:B6N2 mec turning prop.jpg

From Wikipedia, the free encyclopedia

You have new messages (last change).
No higher resolution available.

B6N2_mec_turning_prop.jpg‎ (507 × 281 pixel, file size: 13 KB, MIME type: image/jpeg)

Nakajima B6N2 before starting the engine. The mechanic is manually turning the prop, to prevent hydraulic lock. A hydraulic lock occurs in a cylinder when it gets full of oil and the connecting rod attempts to displace it. Liquids are not compressible, so it will bend, or possibly break the connecting rod. This used to be a real problem in radial engines with a bottom cylinder, the oil would run down into the lower cylinder. This is why you see radials being "pulled through" by hand before starting the engine.

www.ijnafpics.com

[edit] Licensing

Public domain
This photographic image was published before 31st December 1956 or photographed before 1946 and not published for 10 years thereafter under jurisdiction of the Government of Japan. Thus this photographic image is considered to be public domain according to article 23 of old copyright law of Japan and article 2 of supplemental provision of copyright law of Japan. This applies world wide.

File history

Legend: (cur) = this is the current file, (del) = delete this old version, (rev) = revert to this old version.
Click on date to download the file or see the image uploaded on that date.

  • (del) (cur) 17:02, 18 June 2006 . . Felix c (Talk | contribs) . . 507×281 (13,469 bytes) (Nakajima B6N2 before starting the engine. The mechanic is manually turning the prop, to prevent hydraulic lock. A hydraulic lock occurs in a cylinder when it gets full of oil and the connecting rod attempts to displace it. Liquids are not compressible, so)

The following pages on the English Wikipedia link to this file (pages on other projects are not listed):

Retrieved from "http://en.wikipedia.org../../../b/6/n/Image%7EB6N2_mec_turning_prop.jpg_4f9d.html"