Aquatint
From Wikipedia, the free encyclopedia
Aquatint is an intaglio printmaking technique, a variant of etching.
Intaglio printmaking makes marks on the matrix (in the case of aquatint, a copper or zinc plate) that are capable of holding ink. The inked plate is passed through a printing-press together with a sheet of paper, resulting in a transfer of the ink to the paper. This can be repeated a number of times, depending on the particular technique.
Like etching, Aquatint uses the application of acid to make the marks in the metal plate. Where the etching technique uses a needle to make lines that print in black (or whatever colour ink is used), aquatint uses powdered resin which is acid resistant in the ground to create a tonal effect. The tonal variation is controlled by the level of acid exposure over large areas, and thus the image is shaped by large sections at a time. Another tonal technique, mezzotint, begins by making a plate surface evenly indented so that it will carry a fairly dark tone of ink. The mezzotint artist then creates his image by smoothing out those areas that he wishes to carry less ink, and thus be lighter in prints.
[edit] The technique of aquatint
An aquatint begins with a copper or zinc plate. The artist applies a ground by either dissolving powdered resin in spirits or applying the powder directly to the surface of the plate.
The plate is then heated; if the plate is covered with powder, the resin melts forming a fine and even coat; if it is in spirits, the spirits evaporate and the result is essentially the same. Now the plate is dipped in acid, producing an even and fine level of corrosion (the "bite") sufficient to hold ink. At this point, the plate is said to carry about a 50% halftone. This means that, were the plate printed with no further biting, the paper would display a gray color more or less directly in between white (no ink) and black (full ink).
At some point the artist will then etch an outline of any aspects of the drawing he wishes to establish with line; this provides the basis and guide for his later tone work. He may also have applied (at the very start, before any biting occurs) an acid-resistant "stop out" (also called an asphaltum or hard ground) if he intends to keep any areas totally white and free of ink, such as highlights.
The artist then begins immersing the plate in the acid bath, progressively stopping out (protecting from acid) any areas that have achieved the designed tonality. These tones, combined with the limited line elements, give aquatints a distinctive, watery look. Also, aquatints, like mezzotints, provide ease in creating large areas of tone without laborious cross-hatching; but aquatint plates, it is noted, are generally more durable than mezzotint plates.
The first etch should be for a short period of time (30 seconds to 1 minute, with a wide variation depending on how light the lightest tones are meant to be). A test piece may be made with etching times noted, as the strength of the etchant will vary. More than thirty minutes should produce a very dark area. Etching for many hours (up to 24) will be as dark as etching for one hour, but the deep etch would produce raised ink on the paper.
Contemponary printmakers often use spraypaint instead of a powder.
[edit] Famous examples
Goya famously took great advantage of aquatint printmaking, in his Los Caprichos (1799); Los Desastres de la Guerra (1810–19); La Tauromaquia (1816); and Disparates (ca. 1816–23)
Master engraver Robert Havell used aquatint for John James Audubon's Birds of America (1826-38).
