Anisotropy
From Wikipedia, the free encyclopedia
Anisotropy (the opposite of isotropy, or homogeneity in all directions) is the property of being directionally dependent. It can be defined as a difference in a physical property (absorbance, refractive index, density, etc.) for some material when measured along different axes. An example is the light coming through a polarising lens.
Contents |
[edit] Fields of interest
[edit] Computer graphics
In the field of computer graphics, an anisotropic surface will change in appearance as it is rotated about its geometric normal, as is the case with velvet.
Anisotropic filtering (AF) is a method of enhancing the image quality of textures on surfaces that are far away and steeply angled with respect to the point of view. Older techniques, such as bilinear and trilinear filtering don't take account of the angle a surface is viewed from, which can result in aliasing or blurring of textures. By reducing detail in one direction more than another, these effects can be reduced.
This is not to be confused with a chemical anisotropic filter, as used to filter particles, which is a filter with increasingly smaller interstitial spaces in the direction of filtration so that the proximal regions filter out larger particles and distal regions increasingly remove smaller particles, resulting in greater flow-through and more efficient filtration.
[edit] Physics
Cosmologists use the term to describe the fluctuations in the background radiation left over after the big bang. The term refers to the difference in the temperature of the cosmic microwave background radiation with direction.
Physicists use the term to refer to some properties of plasmas. For example, a plasma may have a magnetic field oriented in a preferred direction, or show "filamentation" (such as that seen in lightning or a plasma globe) that is directional.
An anisotropic liquid is one which has the fluidity of a normal liquid, but has an average structural order relative to each other along the molecular axis, unlike water or chloroform, which contain no structural ordering of the molecules. Liquid crystals are examples of anisotropic liquids.
Some materials conduct heat in a way that is isotropic, that is independent of spatial orientation around the heat source. It is more common for heat conduction to be anisotropic, which implies that detailed geometric modeling of typically diverse materials being thermally managed is required. The materials used to transfer and reject heat from the heat source in electronics are often anisotropic.
Many crystals are anisotropic to light (optical anisotropy), and exhibit properties such as birefringence. Crystal optics describes light propagation in these media. An axis of anisotropy is defined as the axis along which isotropy is broken (or an axis of symmetry, such as normal to crystalline layers). Some materials can have multiple such optical axes.
[edit] Geology
Seismic anisotropy is the variation of seismic wavespeed with direction. Seismic anisotropy is an indicator of long range order in a material, where features smaller than the seismic wavelength (e.g., crystals, cracks, pores, layers or inclusions) have a dominant alignment. This alignment leads to a directional variation of elasticity wavespeed. Measuring the effects of anisotropy in seismic data can provide important information about processes and mineralogy in the Earth; indeed, significant seismic anisotropy has been detected in the Earth's crust, mantle and inner core.
Geological formations with distinct layers of sedimentary material can exhibit electrical anisotropy; electrical conductivity in one direction (e.g. parallel to a layer), is different from that in another (e.g. perpendicular to a layer). This property is used in the gas and oil exploration industry to identify hydrocarbon-bearing sands in sequences of sand and shale. Sand-bearing hydrocarbon assets have high resistivity (low conductivity), whereas shales have lower resistivity. Formation evaluation instruments measure this conductivity/resistivity and the results are used to help find oil and gas wells.
[edit] Medicine
Anisotropy is also a well-known property in medical ultrasound imaging describing a different resulting echogenicity of soft tissues, such as tendons, when the angle of the transducer is changed. In diffusion tensor imaging, anisotropy alterations may reflect diffusion changes of water in the brain, particularly in the white matter.
[edit] Material Science & Engineering
Anisotropy describes the phenomena of chemical bond strengths being directionally dependent. Most materials exhibit anisotropic behavior, where the Young's Modulus depends on the direction of the load. Anisotropy in polycrystalline materials can also be due to certain texture patterns which are often produced during manufacturing of the material. In the case of rolling, "stringers" of texture are produced in the direction of rolling, which can lead to vastly different properties in the rolling and transverse directions. Some materials, such as wood and fibre-reinforced composites are very anisotropic, being much stronger along the grain/fibre than across it. Metals and alloys tend to be more isotropic, though they can sometimes exhibit significant anisotropic behaviour. This is especially important in processes such as deep-drawing.
[edit] Microfabrication
Anisotropic etching techniques (such as Deep reactive ion etching) are used in microfabrication processes to create well defined microscopic features with a high aspect ratio. These features are commonly used in MEMS and microfluidic devices, where the anisotropy of the features is needed to impart desired optical, electrical, or physical properties to the device.