Acrylic acid

From Wikipedia, the free encyclopedia

Acrylic acid
Acrylic acid
General
Systematic name 2-Propenoic acid
Other names Acroleic acid
Ethylenecarboxylic acid
Propene acid
Propenoic acid
Vinylformic acid
Molecular formula CH2=CHCOOH
SMILES C=CC(=O)O
Molar mass 72.06 g/mol
Appearance clear, colorless liquid
CAS number [79-10-7]
Properties
Density and phase 1.051 g/ml, liquid
Solubility in water Unlimited
Other solvents:
ethanol, diethyl ether,
chloroform
Fully miscible
Melting point 12 °C (285 K)
Boiling point 139 °C (412 K)
Acidity (pKa) 4.25
Viscosity 1.3 cP at 20 °C
Hazards
MSDS External MSDS
Main hazards Corrosive (C),
Dangerous for the
environment (N)
NFPA 704

2
3
2
 
Flash point 46 °C
R-phrases R10, R20/21/22,
R35, R50
S-phrases S26, S36/37/39,
S45, S61
RTECS number AS4375000
Supplementary data page
Structure and
properties
n, εr, etc.
Thermodynamic
data
Phase behaviour
Solid, liquid, gas
Spectral data UV, IR, NMR, MS
Related compounds
Related Carboxylic acids Methacrylic acid
Related compounds Acryloyl chloride
Acrylamide
Related polymers Acrylate polymers
Sodium polyacrylate
Except where noted otherwise, data are given for
materials in their standard state (at 25 °C, 100 kPa)
Infobox disclaimer and references

Acrylic acid or 2-propenoic acid is a chemical compound (formula C3H4O2) and it is the simplest unsaturated carboxylic acid with both a double bond and a carboxyl group linked to its C3. In its pure form, acrylic acid is a clear, colorless liquid with a characteristic acrid odor. It is miscible with water, alcohols, ethers and chloroform. Acrylic acid is produced from propylene, a gaseous product of oil refineries.

Acrylic acid undergoes the typical reactions of a carboxylic acid and, when reacted with an alcohol, it will form the corresponding ester. The esters and salts of acrylic acid are collectively known as acrylates (or propenoates). The most common alkyl esters of acrylic acid are methyl-, butyl-, ethyl- and 2-ethylhexyl-acrylate.

Acrylic acid and its esters readily combine with themselves or other monomers (e.g amides, acrylonitrile, vinyl, styrene and butadiene) by reacting at their double bond, forming homopolymers or copolymers which are used in the manufacture of various plastics, coatings, adhesives, elastomers as well as floor polishes and paints.

[edit] Safety

Acrylic acid is severely irritating and corrosive to the skin. For skin exposures, rinse with large amounts of water and seek medical help. Eye contact can result in severe corneal burns and may result in irreversible injury. Inhalation of vapors may cause irritation to the respiratory tract, drowsiness or headache, although simply smelling the monomers does not mean you are being exposed to a hazard (air monitoring is necessary to determine exposure). The odor is described as pungent and acrid. Low exposure will cause minimal or no health effects while high exposure could result in pulmonary edema.



[edit] External links