XE class submarine

From Wikipedia, the free encyclopedia

Royal Navy Ensign General Characteristics
Displacement: 30.25 tons surfaced
33.5 tons submerged
Length: 53.25 ft (16.23 m)
Beam: 5.75 ft (1.75 m)
Draught:
Propulsion: Single shaft
1 Gardner 4-cylinder diesel engine 42 hp (31.3 kW)
1 electric motor 30 hp (22.3 kW)
Speed: 6.5 knots (12.0 km/h) surfaced
5.5 knots (10.1 km/h) submerged
Range:
Complement: 4-5
Armament: Two 4,400 lb detachable explosive charges
Diving depth:

Six XE class midget submarines (HMS XE1 to XE6) were built for the Royal Navy during 1944. They were an improved version of the X Class midgets used in the attack on the Tirpitz.

They carried a crew of four, typically a Lieutenant in command, with a Sub-Lieutenant as deputy, an Engine Room Artificer in charge of the mechanical side and a Seaman or Leading-Seaman. At least one of them was qualified as a diver.

Apart from the two side charges, which contained four tons of Amatol, they carried at least six 200 pound limpet mines which were attached to the target by the diver.

They and their depot ship HMS Bonaventure arrived at Labuan in July 1945. Four of them managed to see action before the war ended.

Contents

[edit] Operation Struggle

In August, 1945, HMS XE1 and HMS XE3 executed a joint attack on Japanese cruisers within Singapore harbour. XE3 was tasked with mining the cruiser Takao. The approach along the Straits of Johor and through the various harbour defences took 11 hours plus a further 2 hours to locate the camouflaged target. Despite several opportunities for Japanese defenders to spot the vessel, XE3 successfully reached the Takao, fixed limpet mines and dropped its two, 2-ton side charges. The withdrawal was successfully made and XE3 safely contacted HMS Stygian, the escort submarine.

Meanwhile, XE1 had failed to find its target, the cruiser Myōkō. Instead, and knowing that the explosives already laid could explode, XE1's own charges were also laid under the Takao. XE1 escaped successfully.

The Takao was severely damaged and never sailed again.

[edit] Operations Sabre and Foil

These were a pair of operations to cut undersea telephone cables connecting Singapore, Saigon, Hong Kong and Tokyo. The intention was to oblige the Japanese to use radio and make themselves open to message interception.

HMS XE4 performed Operation Sabre and successfully located and cut the cables from Saigon, while HMS XE5 also successfully cut cables close to Lamma Island, Hong Kong (Operation Foil).

[edit] List of XE-Craft

  • First group
    • XE1 — built by Vickers, used in Operation Struggle, scrapped 1945
    • XE2 — built by Vickers, scrapped 1945
    • XE3 — built by Vickers, used in Operation Struggle, scrapped 1945
    • XE4 — built by Vickers, used in Operation Sabre, scrapped 1945
    • XE5 — built by Vickers, used in Operation Foil, scrapped 1945
    • XE6 — built by Vickers, scrapped 1945
    • XE7 — built by Broadbent, scrapped 1952
    • XE8 — built by Broadbent, scrapped 1952
    • XE9 — built by Markham, scrapped 1952
    • XE10 — built by Markham, cancelled incomplete 1945
  • Second group
    • XE11 — built by Marshall, collided with boom defence vessel in Loch Striven and lost March 6, 1945, salvaged
    • XE12 — built by Marshall, cannibalised for spares 1952
  • Third group with minor improvements, built 1954-5

[edit] References

[edit] External links