Image:Welding wire feeder-Miller-D60-side-triddle.jpg

From Wikipedia, the free encyclopedia

Wikimedia Commons logo This is a file from the Wikimedia Commons. The description on its description page there is shown below.

[edit] Overview

This is a picture of the side of a Miller D60 welding wire feeder. As pictured the wire feeder is configured for .052 inch (1.3 mm) Flux Cored Arc Welding. This side view exposes the drive rollers which grip the wire and feed it through the cable and welding gun. In this picture the cable and gun are missing and instead the wire simply hangs free from the location where the cable would be connected. The blue box with the Quimby sticker on it is a Miller XMT 305 CC/CV power source which supports GMAW, SMAW, and GTAW.

[edit] Credits

Photograph taken by Triddle in the Clark College (Washington) welding lab on February 25, 2005.

Source: English Wikipedia, original upload 26 February 2005 by Triddle

The copyright holder of this image allows anyone to use it for any purpose including unrestricted redistribution, commercial use, and modification.

Note:
If the image requires attribution, use {{Attribution}} instead
If this is your own work, please consider using {{PD-self}} instead.


العربية | Česky | Dansk | Deutsch | English | Esperanto | Español | فارسی | Français | Interlingua | Italiano | 日本語 | Nederlands | Polski | Português | Русский | Svenska | Türkçe | 简体中文 | 正體中文 | 粵語 | +/-

The following pages on the English Wikipedia link to this file (pages on other projects are not listed):

Metadata

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified image.